Resumen del contenido incluido en la página 1
NV-HV61GL_GN.book 1 ページ ２００４年２月１９日 木曜日 午後１時２６分
Operating Instructions
Video Cassette Recorder
Model No.
NV-HV61 Series
Contents Page
Warning and Important Information 2
Controls and Components 3
Connections 4
Tuning the TV to Your VCR 5
Storing TV Broadcasts in Your VCR 5
Setting the Clock of Your VCR 7
Settings Using the On Screen Display 7
Option Setting 8
Playback 9
Recording 10
Timer Recording 13
Search Functions 15
Before Requesting Service 17
Specifications 19
Before attempting to connec
Resumen del contenido incluido en la página 2
NV-HV61GL_GN.book 2 ページ ２００４年２月１９日 木曜日 午後１時２６分 Cautions before you operate this VCR Warning and Important Information Avoid: Humidity and dust. Extreme heat such as direct sunlight. As this equipment gets hot during use, operate it in a Magnets or electromagnetic objects. well ventilated place; Touching internal parts of the VCR. Do not install this equipment in a confined space Water or some other liquid. such as a book case or similar unit. Lightning. (Disconnect the aerial plu
Resumen del contenido incluido en la página 3
NV-HV61GL_GN.book 3 ページ ２００４年２月１９日 木曜日 午後１時２６分 Controls and Components (16) (17) (1) (34) (35) VCR (18) TV (1) EJECT CH VOL (19) (2) AV TIMER REC REC/OTR / I TRACKING/V-LOCK (3) 123 CH (20) 456 (4) 789 (4) (4) -/- - 0 (36) (37) (14) (38) (20) (39) (40) (41) (22) (10) (12) (8) (27) (21) CANCEL INPUT SEL AUDIO PROG PLAY (5) (22) TIMER (6) (23) PROG CHECK I-TIMER (7) (24) (8) NAVI MENU (9) (25) (26) (42) (43) (44) (45) (10) (27) ENTER (28) JET REW PAUSE/SLOW (11) (29) (12)
Resumen del contenido incluido en la página 4
NV-HV61GL_GN.book 4 ページ ２００４年２月１９日 木曜日 午後１時２６分 Setting the Remote Control to Operate Connections Your TV You can operate the TVs of the manufacturers listed below This section shows you how to connect the VCR to an aerial, with the remote control after setting it. TV, etc. This setting procedure allows you to operate the TVs of some When the VCR is turned on after unpacking and manufacturers using the supplied remote control. connecting the aerial cable and the mains lead, Plug in Prepar
Resumen del contenido incluido en la página 5
NV-HV61GL_GN.book 5 ページ ２００４年２月１９日 木曜日 午後１時２６分 It is also possible to select by pressing [Numeric] (3). Tuning the TV to Your VCR Example: 28: 2 8 The VCR supplies a signal to the TV via the RF coaxial cable 3 Press [MENU] (9) to finish the setting mode. on channel AU28-69 or NZ21-69. 4 Retune your TV to the new RF channel for the VCR. If you have connected the VCR to the TV through the Audio/ Video input sockets, then you do not need to follow the Note: procedure below. To view the pictur
Resumen del contenido incluido en la página 6
NV-HV61GL_GN.book 6 ページ ２００４年２月１９日 木曜日 午後１時２６分 If Auto Tuning stops halfway by turning the VCR off or a Manual Tuning Procedure power failure, If the VCR is not correctly tuned by Auto Tuning, follow the Or if the VCR is turned on without the aerial connected procedure below. and all channels are skipped: 1 Press [MENU] (9) to display the Main menu on the TV 1 Disconnect the mains lead and then reconnect it. screen. 2 Turn off the VCR and then turn it on. 2 Press [43] (28) to select [TUN
Resumen del contenido incluido en la página 7
NV-HV61GL_GN.book 7 ページ ２００４年２月１９日 木曜日 午後１時２６分 Setting the Clock of Your VCR Settings Using the On Screen Display In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock Preparations back up in the event of a power failure can only be Confirm that the TV is on and the VCR viewing channel is guaranteed for maximum of 1 hour. selected. Preparations Turn on the VCR. Confirm that the TV is on and the VCR viewing channe
Resumen del contenido incluido en la página 8
NV-HV61GL_GN.book 8 ページ ２００４年２月１９日 木曜日 午後１時２６分 4 Tape running display Option Setting Stop, Eject Rewind, Review, OPTION Index Search:, MENU TAPE SELECT [AUTO] 6 CLOCK SET NTSC INPUT SELECT [AUTO] Jet Search6, TUNER PRESET NTSC PB SELECT [onPALTV] SYSTEM JET NAVIGATOR [OFF] Jet Rewind OPTION DELETE NAVIDATA [NO] TAPE REFRESH OSD REC [OFF] OSD [AUTO] NAVI MEMORY 0PROG. MONAURAL [OFF] SELECT : , ENTER Fast Forward, Cue, END : MENU END: MENU SELECT: Index Search 9, 5 Jet Search 5 1 Pr
Resumen del contenido incluido en la página 9
NV-HV61GL_GN.book 9 ページ ２００４年２月１９日 木曜日 午後１時２６分 OSD REC: To set the conditions for the OSD Playback Recording function. Press [21] (28) to select [ON] or [OFF]. Preparations OFF: Initially set at this position. Confirm that the VCR is on. ON: This setting enables OSD Recording. (See page Confirm that the TV is on and the VCR viewing channel is 11.) If you select [ON], [JET NAVIGATOR] is set selected. to [OFF] automatically. Insert a recorded video cassette. For Normal Playback: OSD: T
Resumen del contenido incluido en la página 10
NV-HV61GL_GN.book 10 ページ ２００４年２月１９日 木曜日 午後１時２６分 To Play back S-VHS Cassette Tape Recording (SQPB=S-VHS Quasi Playback) It is also possible to play back tapes recorded in the S-VHS Preparations system. Confirm that the VCR is on. Some picture noise may occur depending on the type of Confirm that the TV is on and the VCR viewing channel is tape used. selected. It is not possible to fully obtain the high resolution that S- VHS is capable of. Operations It is not possible to record i
Resumen del contenido incluido en la página 11
NV-HV61GL_GN.book 11 ページ ２００４年２月１９日 木曜日 午後１時２６分 Important Note for the NICAM System To Display the Approximate Remaining When NV-HV61GN is switched on, the tuner will automatically Tape Time switch to a NICAM broadcast, if NICAM is being transmitted. The remaining tape time can be displayed in the VCR display. At this time the NICAM signal is transmitted on stereo 1 Select [TAPE SELECT] from the On Screen Display and channels only, since the M1 and M2 formats are not yet select the corres
Resumen del contenido incluido en la página 12
NV-HV61GL_GN.book 12 ページ ２００４年２月１９日 木曜日 午後１時２６分 Operations Recording from an external source 1 Press [PLAY] (8) to start playback. This function can be used to make up an edited tape from other recordings or video sources. 2 At the point where you want to join a new scene, press A new scene can be added to the end of previous one. [PAUSE/SLOW] (29) to put it in the still playback mode. Recording VCR 3 Press [REC] (15) to put it in the recording pause mode. (1) 4 Start playback on the source
Resumen del contenido incluido en la página 13
NV-HV61GL_GN.book 13 ページ ２００４年２月１９日 木曜日 午後１時２６分 9 Press [TIMER (REC)] (14) to switch the VCR over to the timer recording standby mode. Timer Recording When [JET NAVIGATOR] is set to [ON] (see page 8), the [PROGRAMME IS COMPLETE. REMAINING Easy Timer Programming * PROGRAMME 49.] message appears. Up to 16 timer programmes, including weekly and daily When [JET NAVIGATOR] is set to [OFF] (see page 8), programmes, can be recorded up to one month in advance by * the [PROGRAMME IS COMPLETE.
Resumen del contenido incluido en la página 14
NV-HV61GL_GN.book 14 ページ ２００４年２月１９日 木曜日 午後１時２６分 Setting other Programmes in Succession Timer recording for the same programme Repeat steps 1-9 of Easy Timer Programming (page 13). on the next week (Intelligent Timer) When you wish to set the timer recording for programmes Programming a Timer Recording of a TV which will be recorded within 1 week and you have ever recorded the programmes before, you can record them soon Programme Until its End with I-TIMER function without entering day an
Resumen del contenido incluido en la página 15
NV-HV61GL_GN.book 15 ページ ２００４年２月１９日 木曜日 午後１時２６分 To Delete the Jet Navigator Data of a Search Functions Single Video Cassette Tape Keep [CANCEL] (5) pressed for more than 5 seconds while Jet Navigator the Jet Navigator list appears. This VCR can display a list of the recorded programmes on [ss] appears on the list. the inserted video cassette on the TV screen. You can then See page 8 to delete all the Jet Navigator data stored in the select the desired programme, and the VCR will quickly l
Resumen del contenido incluido en la página 16
NV-HV61GL_GN.book 16 ページ ２００４年２月１９日 木曜日 午後１時２６分 Notes: To Demonstrate the Jet Navigator Function Searching in either direction is possible up to the 20th index Keep [NAVI] (25) pressed for more NO.01 JET NAVIGATOR DATE CH ON CATEGORY signal. than 5 seconds without inserting a 1/10 2 8:00 MUSIC 1/10 6 19:00 SPORT If you press either of [INDEX] (13) too many times, simply cassette tape. 1/10 4 21:00 MOVIE 1/10 6 22:00 CHILD press the other
Resumen del contenido incluido en la página 17
NV-HV61GL_GN.book 17 ページ ２００４年２月１９日 木曜日 午後１時２６分 Recording will not operate correctly The symptom description is indicated in brackets [ ]. Before Requesting Service [The indication flashes whenever recording is attempted.] Message of On Screen Display The erasure prevention tab on the video cassette has been The error message is indicated in brackets [ ]. broken off. #Use a tape with an intact erasure prevention tab, or cover [PLEASE PUT IN A VIDEO CASSETTE.] the tab hole with adhesive ta
Resumen del contenido incluido en la página 18
NV-HV61GL_GN.book 18 ページ ２００４年２月１９日 木曜日 午後１時２６分 Crystal View Control The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. Adjusting the Playback Picture Under normal conditions, the VCR automatically adjusts the playback picture for optimum quality. However, in some cases it may be necessary to adjust it manually. If the Picture Contains Noise Bars and It Is Not Clear to See (Tracking adjustment): If n
Resumen del contenido incluido en la página 19
NV-HV61GL_GN.book 19 ページ ２００４年２月１９日 木曜日 午後１時２６分 Specifications NV-HV61GL/GN Power Source: 220–240 V AC 50/60 Hz Power Consumption: 13 W Video Recording System: 2 rotary heads, helical scanning system Video Heads: 4 heads Audio Heads: 2 heads (Hi-Fi) Tape Speed: PAL SP; 23.39 mm/s LP; 11.7 mm/s EP; 7.8 mm/s NTSC SP; 33.3 mm/s EP; 11.1 mm/s Tape Format: VHS tape Record/Playback Time: PAL SP; 240 min with NV-E240 PAL LP; 480 min with NV-E240 PAL EP; 720 min with NV-E240 FF/REW Time: Approx. 60 s
Resumen del contenido incluido en la página 20
NV-HV61GL_GN.book 20 ページ ２００４年２月１９日 木曜日 午後１時２６分 Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/
