Manual de instrucciones de Philips VR421CAT

Resumen del contenido incluido en la página 1

VR421CAT
VR621CAT
Video Cassette Recorder
Hookup Pages

Resumen del contenido incluido en la página 2

6 Hookups without a Cable Box/Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. (The VR621CAT is illustrated here. The VR421CAT has single AUDIO IN/OUT jacks.) 1 Disconnect the antenna or cable from your TV. Antenna Indoor/Outdoor (300 ohm) OR ANTENNA IN Jack (

Resumen del contenido incluido en la página 3

Hookups without a Cable Box/Direct Broadcast System (cont’d) 7 3 Connect the supplied black RF coaxial cable to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.) ANTENNA IN Jack (on back of TV) supplied black example only RF coaxial cable 4 Plug in the TV and the VCR. 5 Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever channel is not used or least

Resumen del contenido incluido en la página 4

8 Hookups with a Cable Box/Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: l You may view any channel. l You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. l You may not view a channel other than the one you are recording. l You may not program channels at the VCR. l You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03

Resumen del contenido incluido en la página 5

Hookups with a Cable Box/Direct Broadcast System (cont’d) 9 With this connection: l You may watch one channel while recording another. l You may not record scrambled channels. VCR 1 Cable Box/DBS 2 Cable Signal TV’s ANTENNA RF coaxial cable RF coaxial cable IN Jack 3 Connections 1 Connect a Cable signal to the VCR’s ANT(enna) IN Jack. 2 Use the supplied black RF coaxial cable to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS. 3 Use a second RF coaxial cable (not supplied) t

Resumen del contenido incluido en la página 6

10 Hookups with a Stereo TV VR621CAT antenna or cable to ANT(enna) IN Jack 1 VIDEO (yellow) and AUDIO (red and white) OUT Jacks Video Cable Audio and Video IN 2 Jacks on TV Stereo Audio Cable 3 OR antenna or cable to VR421CAT ANT(enna) IN Jack 1 ANT IN AUDIO OUT IN OUT CH3 CH4 VIDEO VIDEO (yellow) and Audio and Video AUDIO (white) OUT Jacks IN Jacks on TV Video Cable 2 “Y” splitter Audio Cable 3 l Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack

Resumen del contenido incluido en la página 7

Front Panel 27 F.FWD (Fast Forward) Button When playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 41. Press to Remote Sensor select an item in the VCR menu or to change the setting of a Receives a signal from your menu item. remote control so you can oper- ate your VCR from a distance. REW(ind) Button When playback is stopped, press to rewind the tape at POWER Button

Resumen del contenido incluido en la página 8

28 Rear Panel ANT(enna) IN Jack Connect your antenna or cable here. Details are on pages six-10. AUDIO IN Jack(s) Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, another VCR, or an audio source here. Details are on page 37. If you connect other equipment to the AUDIO and VIDEO IN jacks on the back of the VCR, select channel 001 (AV REAR) at the VCR. This allows you to view or hear the materials playing on the other equipment. The VR621CAT is shown here. The VR421CAT has on

Resumen del contenido incluido en la página 9

Rerecording (Tape Duplication) 37 The instructions on this page show you how to copy tapes. The illustration uses two VR621CAT VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7. 1. Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2 VCR 1 VCR 2 - Recording VCR Playing VCR 3. RF coaxial cable from the OUT jack of 2. Video cable from VIDEO OUT Jack VCR 2 to the TV’s of VCR 1 to VIDEO IN Jack of VCR 2 ANTENNA I