Manual de instrucciones de Sylvania KVS400A

Resumen del contenido incluido en la página 1

VIDEO CASSETTE
OWNER’S MANUAL
If you need additional
RECORDER
operating assistance after
reading this owner's manual
or to order replacement
accessories, please call
KVS400A
TOLL FREE : 1-800-968-3429.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
WARNING:
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within
CAUTION
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
RISK OF ELECTRIC SH

Resumen del contenido incluido en la página 2

PRECAUTIONS DESCRIPTION OF CONTROLS DESCRIPTION OF CONTROLS PRECAUTIONS INSTALL LOCATION Front Panel 123456 For safety and optimum performance of your VCR: • Install the VCR in a horizontal and stable position. REW PLAY F.FWD Do not place anything directly on top of the VCR. REC/ PAUSE/ POWER VCR/TV TAPE IN TIMER REC STILL OTR Do not place the VCR directly on top of the TV. POWER VCR/TV TAPE SPEED CHANNEL STOP/EJECT VIDEO AUDIO MENU • Shield it from direct sunlight and keep it away f

Resumen del contenido incluido en la página 3

IN OUT PREPARATION FOR USE 1 Check contents VCR to AV TV connection using AUDIO/VIDEO Cables Make sure the package contains all of the accessories Using Optional AUDIO/ VIDEO Output Jacks listed in "as below". With this connection, you can get better pictures and SUPPLIED ACCESSORIES sounds when playing back a tape if your TV has A/V Input jacks. Please refer to your TV’s owner’s manual. ACCESSORIES PART NO. Using AUDIO/VIDEO Input Jacks You can use the A/V input jacks on the front or the back C

Resumen del contenido incluido en la página 4

PLAYBACK SETUP FUNCTION TO PRESET THE CHANNEL AGAIN PLAYBACK FUNCTION 1 Press [MENU] until the main menu appears. NORMAL PLAYBACK 2 Select "CHANNEL SET UP" by pressing [PLAY] or [STOP]. Then, press [F.FWD]. Insert the prerecorded tape. The 1 3 Select "AUTO SET UP" by pressing [PLAY] or VCR will turn on. If the safety tab has [STOP]. Then, press [F.FWD]. After scanning, the tuner been removed, the VCR will start stops on the lowest memorized channel. playback automatically. TO ADD/DELETE CHANNELS

Resumen del contenido incluido en la página 5

INDEX SEARCH TIME SEARCH The index signal is recorded on the tape automatically This feature allows you to fast forward or rewind the when the recording is started. If you want to view a tape for a desired length of time. recording at a specific start point, it can easily be done. 1 Press [SEARCH MODE] so that the Time Search 1 Press [SEARCH MODE] so that the Index Search menu appears. menu appears. 2 Enter your desired time to skip INDEX SEARCH 2 Enter your desired number by by pressing [PLAY]

Resumen del contenido incluido en la página 6

RECORDING SPECIAL FUNCTION FEATURES • Go to the digit you want to change by pressing [F.FWD] HINTS FOR TIMER RECORDING or [REW]. Then, enter correct numbers by pressing • If there is a power failure or the VCR is unplugged for [PLAY] or [STOP]. more than 30 seconds, the clock setting and all timer • You may cancel the entire program by pressing [REW] settings will be lost. during the program number flashes. • If the tape runs out before the end time, the VCR will 5 Press [EXIT/RESET] to exit. sw

Resumen del contenido incluido en la página 7

TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power. • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. Timer recording is impossible. • Make sure the timer recording is set correctly. • Make sure the power is off. • Make sure the

Resumen del contenido incluido en la página 8

WARRANTY INSTRUCCIONES EN ESPAÑOL CONTROLES DE FUNCIONAMIENTO Y FUNCIONES Panel frontal Indicadores Mando a distancia 1. Compartimiento del videocasete 17. Indicador de alimentación 1. Botón de la alimentación (POWER) 2. Botón de parada/expulsión 18. Indicador de videograbadora/televisor 2. Botones de número (NUMBER) 19. Indicador de videocasete introducido 3. Botón de menús (MENU) 3. Botón de rebobinado 4. Botón de reproducción 20. Indicador del temporizador 4. Botón de visualizador (DISPLAY) 5