Resumen del contenido incluido en la página 1
Use & Care Guide
Installation Instructions
Vent Hood
316495007 - 09/2007
Resumen del contenido incluido en la página 2
2
Resumen del contenido incluido en la página 3
Finding Information 3 Please read and save this guide Thank you for choosing Electrolux, the new premium brand in home appliances. This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information. Keep a record for quick reference Purchase date Electrolux
Resumen del contenido incluido en la página 4
Safety 4 Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION based on the risk type. This symbol alerts you to situations that may cause serious body harm, death or property damage. This symbol alerts you to situations that may cause bodily
Resumen del contenido incluido en la página 5
Safety 5 6. Your hood motor has a thermal overload which will automatically shut off the motor if it becomes over- heated. The motor will restart when it cools down. If the motor continues to shut off and restart, have TO REDUCE THE RISK OF INJURY TO PERSONS the hood serviced. IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:* 7. For best capture of cooking impurities, the bottom of the hood should be a minimum of 24" and a 1. SMOTHER FLAMES with a close-fitting lid, cookie maximum
Resumen del contenido incluido en la página 6
Verify package contents 6 Unpack hood and check contents. You should receive: 1 - Hood 1 - Decorative Flue Assembly 1 - Parts Bag containing: 1 - Mounting Bracket 1 - Discharge Collar 1 - Flue Mounting Bracket 6 - Mounting Screws (4,8 x 38mm Pan Head) 7 - Mounting Screws (3,9 x 9,5mm Pan Head) 2 - Mounting Screws (3.9 x 6mm Flat Head) 6 - Drywall Anchors 2 - Grease Filters 1 - Installation Instructions 1 - Warranty Card MOUNTING BRACKET GREASE FILTERS DECORATIVE FLUE DISCHARGE 7 MOUNTING COLLAR
Resumen del contenido incluido en la página 7
Installation 7 Install the ductwork ROOF CAP To reduce the risk of fire, use only metal ductwork. ROUND DUCT 1. Decide where the ductwork will run between the hood and the outside. DECORATIVE WALL FLUE CAP 2. A straight, short duct run will allow the hood to HOOD perform most efficiently. ROUND ELBOW 3. Long duct runs, elbows, and transitions will reduce 24” TO 30” ABOVE the performance of the hood. Use as few of them 6” COOKING SURFACE ADAPTER as possible. Larger ducting may be required for bes
Resumen del contenido incluido en la página 8
Installation 8 Wiring This range hood must be properly grounded. The unit should be installed by a qualified 33-7/16" electrician in accordance with all applicable (85cm) national and local electrical codes. max GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. Th
Resumen del contenido incluido en la página 9
37” to 43” above cooktop Installation 9 Install mounting bracket Install flue mounting bracket DUCTED AND NON-DUCTED 1. Construct wood wall framing that is flush with inte- rior surface of wall studs. 1. Assemble the flue mounting bracket, adjusting Make sure: outside width as shown. a) the framing is centered over installation loca- tion. 2. Carefully center the mounting bracket directly over b) the height of the framing will allow the mounting the range hood location. bracket to be secured to
Resumen del contenido incluido en la página 10
Installation 10 Prepare the hood NOTE On stainless steel hoods, carefully remove the plastic protective film from all exterior surfaces of the hood and decorative flues, prior to final installation. 1. Remove the polystyrene block and the tape (Fig.1). 2. The back plate shown in Fig. 2 must be removed: remove the (4) screws of the back plate, operating from the inside of the hood (Fig. 3). 3. Remove the tape on the electrical system plate; place the electrical system plate on the hood (protect s
Resumen del contenido incluido en la página 11
Installation 11 NON- DUCTED CONFIGURATION DUCTED CONFIGURATION 1. Install the discharge collar into the duct connector NOTE of the range hood. Fig. 6. The following materials must be purchased DISCHARGE separately for non-ducted recirculation COLLAR installations: DUCT Non - Ducted Recirculation Kit, Model DFKTWC75GS. CONNECTOR 5” diameter duct. 1. Discard discharge collar/damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted Recirculation Kit (Fig. 7). 2. Sec
Resumen del contenido incluido en la página 12
Installation 12 Install the hood NOTE At least two people will be required to mount the hood. 1. Raise the hood into its mounting position. 2. Align the rectangular opening on the back of the hood with the wall-mounting bracket. Gently lower the hood until it securely engages the bracket. Fig. 9. 3. Level the hood with (2) 3.9x9.5mm mounting screws and secure with (2) 4.8x38mm mounting screws. Use drywall anchors provided if wall studs or framing are not available. Fig. 9. 4. Mount the electr
Resumen del contenido incluido en la página 13
Installation 13 9. Carefully place the decorative flue on the hood. Fig. 13. - On ducted installation in rooms with 8-foot ceilings, the air vents are concealed. Install the flue with the air vents down. - On non-ducted installations in rooms with 8-foot ceilings, the air vents are exposed. Install the flue with the air vents up. - On ducted and non-ducted installations in rooms with 9-foot ceilings, the vents are exposed. Install the flue with air vents up. ROOMS WITH 10-FOOT CEILINGS Rooms
Resumen del contenido incluido en la página 14
Installation 14 Install filters (DUCTED AND NON-DUCTED HOODS) 1. To remove the GREASE filters, pull the metal latch tab outside and unlock the filter. 2. To install the GREASE filters, align rear filter tabs with slots in the hood. Depress the metal latch tab, push filter into position and release. Make sure filter is securely engaged after installation. NOTE Prior to use, remove protective film from the GREASE FILTERS filter frame. (NON-DUCTED HOODS ONLY) 1. To remove the CHARCOAL filter, pu
Resumen del contenido incluido en la página 15
Maintenance 15 Proper maintenance of the Range Hood will assure proper performance of the unit. Grease filters Hood cleaning Stainless steel is one of the easiest materials to keep The grease filters should be cleaned when the filter clean. Occasional care will help preserve its fine reset switch will be illuminated. appearance. Use a warm detergent solution. Grease filters are dishwasher safe. Cleaning tips: Hot water with soap or detergent is all that is usu- See “INSTALL FILTERS” section fo
Resumen del contenido incluido en la página 16
Operation 16 Controls fan display light filter fan speed delay on/off shut switch reset switches switches off switch Dead-front mode Push this switch once to turn the timer Off. Filter reset switch When the filter switch is illuminated, it is necessary to clean the GREASE FILTERS. Once the grease filters are cleaned and installed, press in and hold the “filter Stand-by mode reset switch” for approximately 3 seconds. When the filter switch is illuminated and blink, it is necessary to replace the
Resumen del contenido incluido en la página 17
Operation 17 Halogen bulbs Fuse replacement This range hood requires two halogen bulbs (max 20W, 12V, Type T3 bulb, G4 Base). Halogen Bulb Key : 5304454951 SWITCH OFF THE ELECTRICITY SUPPLY. Remove the grease filters. Open the fuse box. ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY Replace with the same type of fuse (5x20mm, 4A, 125V). BEFORE CARRYING OUT ANY OPERATIONS ON THE APPLIANCE. Fuse Key : 5304455332 To change bulbs: 1. Open the cover by prying from the proper slots. - DO NOT ROTATE. CAUTION
Resumen del contenido incluido en la página 18
Warranty Information 18 In the U.S.A., your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries, Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by us or authorized Electrolux Home Products North America servicer. In Canada, our appliance is warranted by Electrolux Canada Corp. WARRANTY THROUGH OUR AUTHORIZED SERVICERS,
Resumen del contenido incluido en la página 19
19
Resumen del contenido incluido en la página 20
04307838/3S
