Resumen del contenido incluido en la página 1
R
EN
MP3/WMA/AAC CD Receiver
CDA-9884
FR
ES
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ITALIA S.p.A.
1-1-8 Nishi Gotanda, 161-165 Princes Highway, Hallam Viale C. Colombo 8, 20090 Trezzano
Shinagawa-ku, Victoria 3803, Australia Sul Naviglio (MI), Italy
Tokyo 141-0031, Japan Pho
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
ENGLISH Setting the Bass Control .................................13 Contents Setting the Bass Center Frequency............... 13 Setting the Bass Bandwidth.......................... 13 Setting the Bass Level ..................................13 Operating Instructions Setting the Treble Control ...............................13 Setting the Treble Center Frequency............13 WARNING Setting the Treble Level ...............................13 Adjusting the High Pass Filter ......................
Resumen del contenido incluido en la página 4
Storing Channel Presets .................................. 19 Equalizer Presets (FACTORY’S EQ) ..........27 Setting the Response Slope for the High Receiving Stored Channels ............................. 20 Range Speaker (TW SETUP)....................27 Storing the desired Sports Team Setting the Filter type....................................28 (SIRIUS only) ............................................. 20 Turning Media Xpander ON/OFF ................28 Storing while receiving a game broadc
Resumen del contenido incluido en la página 5
Operating Instructions DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN WARNING INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. WARNING CAUTION This symbol means important instructions. This symbol means important instructions. Failure to heed them can result in serious injury Failure to heed them can result in injury or or death. material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR HALT USE IMMEDIATELY IF A PROBLEM APPEARS. ATTE
Resumen del contenido incluido en la página 6
Never Attempt the Following Correct Handling Do not grip or pull out the disc while it is being pulled back into the Do not drop the disc while handling. Hold the disc so you will not player by the automatic reloading mechanism. leave fingerprints on the surface. Do not affix tape, paper, or Do not attempt to insert a disc into the unit when the unit power is gummed labels to the disc. Do not write on the disc. off. CORRECT INCORRECT CORRECT Inserting Discs Your player accepts only one disc a
Resumen del contenido incluido en la página 7
Windows Media and the Windows logo are trademarks, or On handling Compact Discs (CD/CD-R/CD-RW) registered trademarks of Microsoft Corporation in the United Do not touch the surface. States and/or other countries. Do not expose the disc to direct sunlight. iPod is a trademark of Apple Inc., registered in the U.S. and Do not affix stickers or labels. other countries. Clean the disc when it is dusty. “MPEG Layer-3 audio coding technology licensed from Make sure that there are n
Resumen del contenido incluido en la página 8
3 Grasp the front panel firmly, slide to the left , and then pull to remove. Getting Started Rotary encoder /ENT (OPEN) MUTE The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. To protect the front panel, place it in the supplied carrying case. When detaching the front panel, do not apply excessive force as it may result in malfunction. Do not leave the front panel open, or drive the car wi
Resumen del contenido incluido en la página 9
Adjusting Volume Radio Turn the Rotary encoder until the desired sound is obtained. Rotary encoder BAND // /ENT SOURCE/ TUNE/A.ME Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press MUTE to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing MUTE again will bring the audio back to its previous level. Preset buttons /ESC (1 through 6) Setting the Time This unit cannot receive HD Radio™ signals (digital t
Resumen del contenido incluido en la página 10
Presetting Stations Manually Frequency Search Function You can search for a radio station by its frequency. 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 1 Press and hold /ENT for at least 2 seconds in Radio mode to activate Frequency search mode. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish 2 Turn the Rotary encoder to select the desired to store the station. frequency. The se
Resumen del contenido incluido en la página 11
5 To pause playback, press / . Pressing / again will resume playback. CD/MP3/WMA/AAC 6 After pressing (OPEN) to open the front panel, press to eject the disc. Rotary encoder SOURCE/ /ENT Do not remove a CD during its eject cycle. Do not load more than (OPEN) / /ESC one disc at a time. A malfunction may result from doing either. If the CD does not eject, press and hold for at least 2 seconds. The “DISC IN” indicator lights up when a disc is inserted. The CD-player can play discs c
Resumen del contenido incluido en la página 12
MP3/WMA/AAC mode : Searching for CD Text : Only a file is repeatedly played back. On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made : Only files in a folder are repeatedly played using the track numbers associated with each song. back. : A disc is repeatedly played back. 1 Press /ENT during play. This will set the search mode. 2 Turn the Rotary encoder to select the desired 2 track, and then press /EN
Resumen del contenido incluido en la página 13
Supported playback sampling rates and bit rates Quick Search MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, You can search for tracks (files). 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps 1 Press and hold /ENT for at least 2 seconds in the CD/Changer/MP3/WMA/AAC mode to activate Quick WMA Search mode. Sampling rates: 48 kHz, 44.1 kHz, 32 kHz Bit rates: 48 - 192 kbps 2 Turn the Rotary encoder to select a desired track (file). AAC The selected track is played ba
Resumen del contenido incluido en la página 14
Order of files Files are played back in the order that the writing software writes Sound Setting them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software’s documentation. The playback order of the folders and files is as Rotary encoder (AUDIO/LOUD) SOURCE/ follows. /ENT BAND Root folder SOUND SETUP /ESC Adjusting Subwoofer Level/Bass Level/ Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat 1 Pre
Resumen del contenido incluido en la página 15
Setting the Bass Level Setting the Subwoofer Level 5 3-3* Turn the Rotary encoder to select the desired You can change the Subwoofer Level to create your own tonal bass level (–7~+7). preference. You can emphasize or weaken the bass level. 1 Press SOUND SETUP to activate the Sound Setting 4 Press and hold /ESC for at least 2 seconds to mode. return to normal mode. 2 Turn the Rotary encoder to select the SUBW If no operation is performed for 15 seconds, the unit will return to LEVEL Adjus
Resumen del contenido incluido en la página 16
• Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if Turning Subwoofer ON/OFF an audio processor with the Treble function is connected. When subwoofer is set to OFF and DEFEAT is set to ON, pressing When the subwoofer is on, you can adjust the subwoofer output level the SOUND SETUP button momentarily will not be functional. (refer to page 13). 6 * When the subwoofer mode is set to OFF, its level cannot be adj
Resumen del contenido incluido en la página 17
4 * When an HD Radio signal is received, text information such as radio station, artist, etc., is displayed. Other Functions If there is no text information, “ARTIST”/“ALBUM”/“SONG”/ “STATION” will be displayed. 5 * RADIO STATION NAME can be switched between “LONG” and “SHORT” in “HD Radio Station Call Setting (STATION CALL)” (page 18). 6 * When a BT AUDIO signal is received, text information such as artist, album, song is displayed. If there is no text information, “ARTIST”/ “ALBUM”/ “SO
Resumen del contenido incluido en la página 18
About “Text” Text: SETUP Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as You can flexibly customize the unit to suit your own preferences and “text”. usage. From the SETUP menu, Visual Customizing, External Device, Some characters may not be displayed correctly with this device, etc., can be modified. depending on the character type. The CD changer must also be CD Text compatible for the Text Rotary encoder SOU
Resumen del contenido incluido en la página 19
Setting the Language Font BLUETOOTH IN LANGUAGE 1 (initial setting) / LANGUAGE 2 Two types of font can be selected. Setting the Bluetooth Connection BT IN ADAPTE / BT IN OFF (Initial Setting) LANGUAGE 1: Normal font LANGUAGE 2: European font If an optional Bluetooth Box (KCE-300BT) is connected, you can place a hands-free call by a Bluetooth- equipped mobile phone. Make this setting when the Bluetooth Box (KCE-300BT) is connected Demonstration and the Bluetooth function is used. For details
Resumen del contenido incluido en la página 20
Setting the External Digital Input POWER IC ON: The speakers are driven by the built-in D-AUX ON / D-AUX OFF (Initial setting) amplifier. When an ALPINE Ai-NET compatible digital audio processor Speakers (PXA-H701) and a DVD player (DVE-5207) not compatible with SPEAKER Ai-NET are connected, set D-AUX to ON to enjoy 5.1-channel RIGHT FRONT Front surround sound. right You can change the D-AUX NAME display when D-AUX is set to ON. Press /ENT when D-AUX is set to ON, and select D-AUX NAME
