Resumen del contenido incluido en la página 1
CASSETTE RECEIVER
РЕСИВЕР С КАССЕТНЫМ ПРОИГРЫВАТЕЛЕМ
KS-FX925R
ATT SOUND
U
DAB
SOURCE
R F
TAPE
D
EQ
VOL VOL
В ñîîòâåòñòâèè ñ Зàêîíîì Рîññèéñêîé Фåäåðàöèè “О çàùèòå ïðàâ
ïîòðåáèòåëåé” ñðîê ñëóæáû (ã îäíîñòè) äàííîãî òîâàðà “ïî èñòå÷åíèè
For installation and
êîòîðîãî îí ìîæåò ïðåäñòàâëяòü îïàñíîñòü äëя æèçíè, çäîðîâüя
ïîòðåáèòåëя, ïðè÷èíяòü âðå ä åãî èìóùåñòâó èëè îêðóæàþùåé ñðå äå”
connections, refer to the
ñîñòàâëяåò ñåìü (7) ëåò ñî äíя ïðîèçâî äñòâà. Эòîò ñðîê яâëяåòñя
separate manual.
âðåìåíåì
Resumen del contenido incluido en la página 2
How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or a similar tool. This will reset the built-in microcomputer. Note: Your preset adjustments — such as preset channels or sound adjustments — will also be erased. How to use the MODE button: If you press MODE, the unit goes into functions mode and the number buttons work as different function buttons. EQ To use these buttons as number buttons again after pressing MODE, wait
Resumen del contenido incluido en la página 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ............... 25 How to use the MODE button ................... 2 Setting the clock ...................................... 25 Changing the general settings (PSM) ...... 25 LOCATION OF THE BUTTONS ............ 4 Detach
Resumen del contenido incluido en la página 4
LOCATION OF THE BUTTONS Control panel Display window s d fgh jk l/ z xc 12437 568 DAB TAPE EQ 9p qwer tyuio;a ; DISP (display) button 14 /¢ buttons 25 (up) button • Also functions as SSM buttons when pressed 23 (tape direction) button together with MODE button. a TP PTY (traffic programme/programme type) 3° (down) button 4 Remote sensor button 5 Display window 60 (eject) button Display window 7 FM AM DAB button s Main display 8 TAPE CD-CH button d Volume (or audio) level meter 9 (standby/on/at
Resumen del contenido incluido en la página 5
2. Place the battery. Preparing the remote controller Slide the battery into the holder with the + side facing upwards so that the battery is fixed in Before using the remote controller: the holder. • Aim the remote controller directly at the remote Lithium coin battery sensor on the main unit. Make sure there is no (product number: obstacle in between. CR2025) Remote sensor 3. Return the battery holder. Insert again the battery holder pushing it until EQ you hear a clicking sound. • Do not expo
Resumen del contenido incluido en la página 6
3 • Selects the preset stations while listening to Remote controller the radio (or the DAB tuner). Each time you press the button, the preset station number increases, and the selected RM–RK50 station is tuned in. • Skips to the previous disc while listening to the CD changer. Each time you press the button, the disc ATT SOUND number decreases, and the selected disc 1 5 starts playing. 4 Functions the same as the control dial on the 2 U 6 main unit. SOURCE R F NOTE: These buttons do not function
Resumen del contenido incluido en la página 7
BASIC OPERATIONS DAB TAPE EQ 3 12 Turning on the power 3 Adjust the volume. To increase the volume. 1 Turn on the power. “HELLO” appears on the display. To decrease the volume. Volume or audio Note on One-Touch Operation: level (see page 27) meter When you select a source in step 2 below, the Volume level appears. power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. To select the FM or AM tuner, press FM AM DAB repeatedly. FM1 FM2 4 Adjust
Resumen del contenido incluido en la página 8
RADIO OPERATIONS DAB TAPE EQ 2 Start searching a station. Listening to the radio Press ¢ to search You can use either automatic searching or manual stations of higher searching to tune in to a particular station. frequencies. Searching a station automatically: Auto search Press 4 to search stations of lower frequencies. 1 Select the band (FM1 – 3, AM). When a station is received, searching stops. DAB To stop searching before a station is received, press the same button you have pressed for sea
Resumen del contenido incluido en la página 9
• If you release your finger from the button, Searching a station manually: the manual mode will automatically turn off Manual search after 5 seconds. • If you hold down the button, the frequency 1 Select the band (FM1 – 3, AM). keeps changing—in 50 kHz intervals (87.5 MHz – 108.0 MHz for FM 1 and FM 2), in 30 kHz intervals (65 MHz – 74 MHz for FM 3) and 9 kHz for AM – MW/LW until you DAB release the button. FM1 FM2 FM3 AM (F1) (F2) (F3) (AM) When an FM stereo broadcast is hard to receive: Note:
Resumen del contenido incluido en la página 10
Manual preset Storing stations in memory You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. You can use one of the following two methods to store broadcasting stations in memory. Ex.: Storing an FM station of 88.3 MHz into the • Automatic preset of FM stations: SSM (Strong- preset number 1 of the FM1 band station Sequential Memory) • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you want to store stations into (in this FM station automatic pr
Resumen del contenido incluido en la página 11
3 Press and hold the number button (in Tuning in to a preset station this example, 1) for more than 2 seconds. You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 10 and 11. 1 Select the band (FM1 – 3, AM). DAB Selected band/preset number and FM1 FM2 FM3 AM “MEMO” (memory) appear (F1) (F2) (F3) (AM) alternately for a while. 2 Select the number (1 – 6) for the preset station you want. E
Resumen del contenido incluido en la página 12
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
Resumen del contenido incluido en la página 13
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the (PSM: see page 26.) current source (another FM station, tape or other connected components). • TA Standby Reception will not work if you are listening to an AM station. TP PTY 2 Select “AF-REG (alternative frequency/regionalization reception)” if not shown on the Press
Resumen del contenido incluido en la página 14
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) from the current source (another FM station, tape or other connected components). • PTY Standby Reception will not work if you are 7 When the current source is FM, the listening to an AM station. PTY indicator either lights up or flashes. • If the PTY indicator lights up, PTY You can select your favourite programme type for Standby Recept
Resumen del contenido incluido en la página 15
Searching your favourite programme 2 Select one of the twenty-nine PTY codes. (See page 18.) You can search any one of the PTY codes. In addition, you can store your 6 favourite programme Selected code name types in the number buttons. appears on the display. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favourite programme types, see below. To search your favourite programme type, see page 16. 3 Press and hold the n
Resumen del contenido incluido en la página 16
To search your favourite programme type Other convenient RDS functions and adjustments 1 Press and hold TP PTY for more than 2 seconds while listening to an FM station. Automatic selection of the station when using the number buttons TP PTY Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit, using the
Resumen del contenido incluido en la página 17
Changing the display mode while Setting the TA volume level listening to an FM station You can preset the volume level for TA Standby Reception. When a traffic programme is received, You can change the initial indication on the display the volume level automatically changes to the preset to station name (PS NAME) or station frequency level. (FREQ) while listening to an FM RDS station. • See also “Changing the general settings (PSM)” • See also “Changing the general settings (PSM)” on page 25. on
Resumen del contenido incluido en la página 18
PTY codes NEWS: News CHILDREN: Entertainment programmes for AFFAIRS: Topical programmes expanding children on current news or affairs SOCIAL: Programmes on social activities INFO: Programmes which impart advice RELIGION: Programmes dealing with any on a wide variety of topics aspect of belief or faith, or the SPORT: Sport events nature of existence or ethics EDUCATE: Educational programmes PHONE IN: Programmes where people can DRAMA: Radio plays express their views either by CULTURE: Programmes
Resumen del contenido incluido en la página 19
TAPE OPERATIONS DAB TAPE EQ To stop play and eject the cassette Listening to a cassette Press 0. You can play back type 1 (normal) tapes. Tape play stops, then the control panel opens and the cassette automatically ejects from the cassette compartment. The source changes to the previously 1 Open the control panel. selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can eject the cassette while the unit is turned off by pressing 0. 2 Inser
Resumen del contenido incluido en la página 20
Finding the beginning of a tune To play back tapes recorded with the Dolby B NR* Multi Music Scan allows you to automatically start 1 Press MODE to enter the functions mode playback from the beginning of a specified tune. while listening to a tape. You can specify up to 9 tunes ahead of or before “MODE” flashes on the lower part of the the current tune. display, and the number buttons work as different function buttons. During playback Specify where (how many tunes ahead of 2 Press (Dolby B), w
