Resumen del contenido incluido en la página 1
CD RECEIVER KD-SHX900
RECEPTOR CON CD KD-SHX900
RECEPTEUR CD KD-SHX900
SOURCE
KD-SHX900
HD
OK
BAND
BACK
DISP
MENU
• This unit is equipped with the display demonstration. To cancel it, see page 9.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 9.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 9.
For installation and connections, refer to the separate manual.
Para la instalación y l
Resumen del contenido incluido en la página 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, u
Resumen del contenido incluido en la página 3
Contents Graphic Displays ......................................... 29 How to reset your unit ..................................... 2 Basic procedure ............................................. 29 Important! (How to read this manual) ............. 4 Downloading the files .................................... 30 Main Features ................................................ 4 Deleting the files ............................................ 31 Deleting all files ...................................
Resumen del contenido incluido en la página 4
Important! • Button operations are explained only with the illustrations as follows: How to read this manual: To make the explanations as simple and easy-to-understand as possible, we have Press briefly. adapted the following methods: • Some related tips and notes are explained later in the sections “More Press repeatedly. about This Receiver” (see page 47), but not in the same section explaining the Press either operations. If you want to know more or one. about the functions, or if you have a
Resumen del contenido incluido en la página 5
Preparation (Remote Controller—RM-RK300) WARNINGS on the battery: 1 • Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. (back side) • Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire. Doing any of these things may cause the battery to give off heat, crack, or start a 2 fire. With the + side facing upwards • Do not leave the battery with other metallic materials. Doing this may c
Resumen del contenido incluido en la página 6
Parts Identification Control panel 1 23 4 5 6 7 SOURCE HD OK BAND BACK DISP MENU 89pqw e r Remote controller 9 y 4 u e 5 8 t 6 02-07_KD-SHX900[J]f.p65 6 04.6.1, 8:29 PM ENGLISH
Resumen del contenido incluido en la página 7
10 (eject) / (angle) button p DISP (BACK) button • Open/close the control panel (and eject • Change the information shown on the the disc, if any, when opened). display. • Adjust the control panel angle if held • When operating the Menus, it works as then pressed. the BACK button (to go back to the previous step). 2 Remote sensor q BAND (OK) button DO NOT expose the remote sensor on • Select the FM/AM band (FM1, FM2, the control panel to strong light (direct FM3, and AM). sunlight or artificial
Resumen del contenido incluido en la página 8
Basic Operations 1 Turn on the power 3 Adjust the volume The Operation screen for last selected source is recalled. 4 Select the DSP mode and sound mode as you want 2 Select the source • For details, see pages 23 to 28. TUNER CD SOURCE LINE-IN CD-CH To drop the volume in a moment (ATT): (SIRIUS) • CD: If a disc is not in the loading slot, you To restore the sound, cannot select CD as the source to play. press it again. • CD-CH: Without connecting the CD changer and setting the “EXT Input” To tur
Resumen del contenido incluido en la página 9
What information is shown on the display The following information are shown commonly for all sources. • If you press DISP on the control panel, the display will show the different information or different screens. (Details about this will be explained later separately for each source.) Current source Current source Sound settings alternately appear information appears with its icon. (pages 23 to 26). • Ex.: Station name assigned/Frequency aaaaaaaaa Canceling the display demonstration 3 Enter th
Resumen del contenido incluido en la página 10
aaaaaaaaa Setting the clock 6 Select “Clock Min.” You can also set the clock system to 24 hours or 12 hours. 1 While playing any source... The Main Menu appears on MENU the display. 7 Adjust the minute. 2 Move the cursor to “PSM” on the Main Menu. 8 Select “24H/12H.” Cursor 3 Enter the PSM Menu. OK 9 Select “24Hours” or “12Hours.” BAND The last selected item appears (highlighted) To exit from the Menu operation, press with the current setting. MENU again. 4 Select “Clock Hr.” 5 Adjust the hour.
Resumen del contenido incluido en la página 11
Radio Operations aaaaaaa a Listening to the radio 3 Start searching for a station You can tune in to both conventional stations and HD Radio stations. • If you want to search for HD Radio stations only, see page 13. “Auto Search” begins. 1 Select the Tuner When a station is received, searching stops. SOURCE When an HD Radio station is tuned in... Analog signals are always received first for a few seconds before digital signals are received. To stop searching, press the same button. 2 Select the
Resumen del contenido incluido en la página 12
What information is shown on the display The following information are shown commonly for tuner operations. • If you press DISP on the control panel, the display will show the different information or different screens (see page 17). 7 While receiving an HD Radio station (Enhanced digital audio) lights up when receiving digital signals of the highest audio quality. (Core digital audio) lights up when receiving digital signals with standard audio quality. • When receiving analog signals, neithe
Resumen del contenido incluido en la página 13
To search for HD Radio stations only— 2 Select “Analog” or “Digital”. HD-Search Auto Digital 1 While listening to any FM/AM Analog broadcast... Hold HD Auto: Activate automatic reception. • lights up. Digital: To receive digital signals. 2 Select either “UP” or “DOWN.” • lights up. Analog: To receive analog signals. • lights up. UP: To search for the HD Radio • If no sound comes out with the current stations from the lower to higher setting selected, change the setting to one frequencies. of the
Resumen del contenido incluido en la página 14
1 While listening to a conventional FM When a conventional FM stereo broadcast or FM HD Radio broadcast... broadcast is hard to receive The Main Menu appears on • This function is only valid for conventional MENU the display. FM stations. 1 While listening to an FM broadcast... The Main Menu appears on MENU 2 Move the cursor to “MODE” on the the display. Main Menu. 2 Move the cursor to “MODE” on the Main Menu. Cursor 3 Enter the FM MODE Menu. OK BAND Cursor 3 Enter the FM MODE Menu. 4 Select “LO
Resumen del contenido incluido en la página 15
aaaaaaaaa HD Radio station automatic presetting— Storing stations in memory HD-Memory You can preset any 6 stations for each band. You can automatically store 6 HD Radio stations. FM station automatic presetting—SSM 1 Select the band (FM1 – FM3, or AM) (Strong-station Sequential Memory) into which you want to store stations. You can automatically store 6 stations from OK both conventional FM stations and HD Radio FM1 FM2 BAND FM stations. AM FM3 1 Select the FM band (FM1 – FM3) you want to store
Resumen del contenido incluido en la página 16
aaaaaaaaa Manual presetting Tuning in to a preset station Ex. Storing an FM station of 92.5 MHz into the preset number 3 of the FM1 band. 1 OK FM1 FM2 BAND OK AM FM3 1 FM1 FM2 BAND AM FM3 (in this example, FM1) 2 Select a preset number (1 – 6). Tune in to a station 2 (in this example, of 92.5 MHz) To select a preset station using the Preset Station List 3 Display the Preset Station List of the selected band. 1 While listening to a station... Hold Hold • Station frequencies (or call signs for HD
Resumen del contenido incluido en la página 17
aaaaaaaaaaaaaaaaaaa Changing the display pattern BACK DISP 7 While receiving an HD Radio station 7 While receiving a conventional station 1 * Information about the program is shown. For conventional FM/AM station, “No Text” is always shown. A window (see page 36) is displayed. Clock time is displayed. 2 Semi-graphic screen* 2 Full graphic screen* (Full graphic screen will be temporarily changed to the semi-graphic screen when you operate the unit.) Goes back to the initial display pattern. 1 * W
Resumen del contenido incluido en la página 18
Basic Disc Operations To fast-forward or reverse the track: 1 Open the control panel Hold Fast-forwards. The unit turns on, then... Reverses. To go to the next or previous tracks: To next tracks. 2 Insert a disc To the beginning of the current track, then the previous tracks. To go to the next or previous folders: The unit draws the disc, the control panel For MP3/WMA discs only: closes then goes back to the previous To next folders. position (see page 39), and playback starts automatically. To
Resumen del contenido incluido en la página 19
Hierarchy • Display indications when inserting • Display indications when inserting an audio CD or a CD Text: an MP3 or a WMA disc: Total play time Total track number Track number Total track number 1 2 Disc name* Track name* Total folder number Folder number Track number 1 * Appear for CD Texts and CDs if it has been assigned. (“No Name” appears if no name is recorded or assigned). 2 3 * Appear only for CD Texts. (“No Name” appears 3 Track name* Folder name* if no name is recorded). 3 * If “ID
Resumen del contenido incluido en la página 20
Advanced Disc Operations a a a aaaaaa Locating a folder/track 2 Display the track list of the current folder. • This function is only for MP3/WMA discs. OK BAND To locate a folder by displaying the folder list of the current disc • This function is only possible using the The current track is highlighted. buttons on the control panel. 3 Select the track you want. 1 While playing a disc... Hold • If the folder includes more than 6 tracks, The current folder is highlighted. you can also display th
