Manual de instrucciones de Audiovox 27PL

Resumen del contenido incluido en la página 1

INSTALLATION INSTRUCTIONS
FOR
1187025 & 27PL
2000+ SUBURBAN W/ SUNROOF
OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM
NOTE: Requires Additional Insert


These instructions are intended for use only by experienced professionals in the automotive customizing
business. Special tools and equipment, as well as specialized handling and care of product during installation,
may be required. Before beginning this installation, carefully read through the following instructions. Use
ex

Resumen del contenido incluido en la página 2

MATERIALS PROVIDED FOR INSTALLATION: 1 ITEM Description QTY SCREW, #10 X 7/8” MACHINE 4 1 2 SCREW SCREW, #10 3/8” SCREW 2 2 WASHER, #10 6 3 3 SCREW, # 8 X 1” SHEET METAL 4 4 SCREW 4 WASHER, # 8 4 5 CONSOLE 1 6 5 MAIN BRACKET 1 7 TEMPLATE 1 8 6 7 8 Sept. 1

Resumen del contenido incluido en la página 3

PREPARATION OF VEHICLE INTERIOR 1. Cut out the oval dome light cutout on the template (item 8 pg 2) with a scissors or knife. Remove dome light from the vehicle by unsnapping the lens and disconnecting the wires. Align template to the ceiling of the vehicle as indicated and tape to ceiling with ½” masking tape. Cut a hole in the headliner using the bold line marked “Cut This Line” on the template. NOTE: You may have to cut twice, once through the template and once through the head

Resumen del contenido incluido en la página 4

6. Install and route all video and audio cables, and any other added component requirements to their respective places in the vehicle. Refer to component installation instructions for wiring diagrams. The suggested routing of the video system cable is as follows: Above the headliner from video system to the B-pillar. Down the B -pillar to the floor. Route the power lead to a fused accessory controlled source. Connect the ground lead to the vehicle chassis. Route the remaining wiring (RCA