Resumen del contenido incluido en la página 1
Q1910/Q1910s, Q2010/Q2010s, Q2210/
Q2210s LCD Monitors
User Guide
Resumen del contenido incluido en la página 2
© 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained he
Resumen del contenido incluido en la página 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Resumen del contenido incluido en la página 4
iv About This Guide ENWW
Resumen del contenido incluido en la página 5
Table of contents 1 Product Features ............................................................................................................................................ 1 Compaq LCD Monitors ......................................................................................................................... 1 2 Safety and Maintenance Guidelines .............................................................................................................. 3 Important Safety Informat
Resumen del contenido incluido en la página 6
Preparing to Call Technical Support ................................................................................................... 25 Locating the Rating Label ................................................................................................................... 26 Appendix B Technical Specifications ............................................................................................................ 27 Compaq LCD Monitors ...............................................
Resumen del contenido incluido en la página 7
1 Product Features Compaq LCD Monitors The Compaq LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen with the following features: ● Large diagonal display ● Maximum graphics resolution: ◦ Q1910\Q1910s: 1366 x 768 @ 60Hz ◦ Q2010\Q2010s: 1600 x 900 @ 60Hz ◦ Q2210\Q2210s: 1920 x 1080 @ 60Hz ◦ Plus full-screen support for lower resolutions ● VGA analog video input ● DVI digital signal (select models) ● Fast response time, providing better experience for ca
Resumen del contenido incluido en la página 8
● Software and utilities CD, containing the following: ◦ Drivers ◦ Auto adjustment software ◦ Documents 2 Chapter 1 Product Features ENWW
Resumen del contenido incluido en la página 9
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the "Connecting the Power Cable" section in Setting Up the Monitor on page 6. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding p
Resumen del contenido incluido en la página 10
Safety Precautions ● Use only a power source and connection compatible with this monitor, as indicated on the label/ back plate of the monitor. ● Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device. ● Install your moni
Resumen del contenido incluido en la página 11
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. ● Use only a power source and connection appropriate for this monitor, as indicated on the label/ back plate of the monitor
Resumen del contenido incluido en la página 12
3 Setting Up the Monitor Unpacking The Monitor 1. Unpack the monitor. Make sure all contents are included. Store the packing box. 2. Turn off the computer and other attached devices. 3. Determine whether the monitor will be desktop mounted or wall-mounted. See "Installing the Monitor" in this chapter. 4. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation. 5. You need a Phillips screwdriver
Resumen del contenido incluido en la página 13
2. Hold the base and push it onto the bottom of the support column until it snaps into place. Figure 3-1 Installing the monitor base 3. Lift the monitor to an upright position and place on a flat, stable surface. Figure 3-2 Monitor in upright position Preparing the monitor for wall-mounting 1. Check the stability of the wall-mounting fixture. WARNING! To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured be
Resumen del contenido incluido en la página 14
4. Release the base from the column by squeezing the two tabs toward each other. Pull the base away from the column as you do so. Figure 3-3 Bottom view of monitor base showing release tabs (circled) 5. Remove the screws inside the support column as indicated. Figure 3-4 Remove the screws inside the support column 8 Chapter 3 Setting Up the Monitor ENWW
Resumen del contenido incluido en la página 15
6. Rock the bottom of the support column until it snaps away from the top portion of the column, which covers the support column mounting bracket. Figure 3-5 Snapping the bottom portion of the column from the top 7. Slide the top portion of the column up to expose the mounting bracket. Figure 3-6 Removing the top portion of the column 8. Remove the four screws that secure the column mounting bracket. ENWW Installing The Monitor 9
Resumen del contenido incluido en la página 16
9. Slide the column mounting bracket away from the bottom of the monitor. Figure 3-7 Sliding the column mounting bracket from the monitor 10. Remove the Compaq logo from the back of monitor to expose the top two threaded holes (A) and (B) for the wall mount bracket. Place the tip of a small, flat blade screwdriver under the logo to pry it up. NOTE: The logo is held in place by rubber cement. Figure 3-8 Removing the logo from the back of the monitor B A D C Use the four holes (A), (B), (C), and
Resumen del contenido incluido en la página 17
Connecting Monitor Cables Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. 1. To connect the VGA cable Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector on the computer. NOTE: If your computer has a DVI connector and no VGA connector, use a DVI-I to VGA adapter to connect your computer to the monitor. Connect the DVI-I to VGA adapter to the DVI c
Resumen del contenido incluido en la página 18
Connecting the Audio Cable Connect the built-in monitor speakers to the computer by using the audio cable, as shown in the following illustration: Figure 3-10 Connecting the audio cables NOTE: When using a VGA or DVI signal, you must connect your audio separately because a VGA or DVI signal converts only video data, not audio data. 12 Chapter 3 Setting Up the Monitor ENWW
Resumen del contenido incluido en la página 19
Connecting the Power Cable 1. Follow all Electrical and Power Warnings WARNING! To reduce the risk of electric shock or damage to your equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet. Be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. A power cord should be routed so tha
Resumen del contenido incluido en la página 20
Cable Management Figure 3-12 Routing cables through the rear of the support column Adjusting The Tilt For optimal viewing, adjust the screen tilt to your own preference, as follows: 1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt. 2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the screen. Figure 3-13 Tilt adjustment 14 Chapter 3 Setting Up the Monitor ENWW
