Resumen del contenido incluido en la página 1
DDX8032BT
DDX8032BTM
MONITOR WITH DVD RECEIVER
INSTALLATION MANUAL
© B54-4652-00/00 (MW/M2W/XW)
Resumen del contenido incluido en la página 2
Accessories 1 0 ..........1 ..........1 2 ! ..........1 ..........1 3 ..........1 4 ..........1 5 ..........2 6 ..........1 7 ..........1 8 ..........6 9 ..........6 | 2 DDX8032BT/DDX8032BTM
Resumen del contenido incluido en la página 3
Installation Procedure • Connect the speaker wires correctly to the terminals to 1. To prevent a short circuit, remove the key from the which they correspond. The unit may be damaged or fail to ignition and disconnect the - battery. work if you share the - wires or ground them to any metal 2. Make the proper input and output wire part in the car. connections for each unit. • When only two speakers are being connected to the 3. Connect the speaker wires of the wiring harness. system, conne
Resumen del contenido incluido en la página 4
Connection If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may Ignition key cause a short circuit, that in turn may start a fire. Always switch connect those wires to the power source running through the fuse box. ACC A Ignition wire (Red) B A Car fuse box Battery wire (Yellow) Car fuse box B (Main fuse) FM/AM Antenna Cord Ground wire (Black) - antenna input (To car chassis) C C Battery Connect to the vehicle's parking brake detectio
Resumen del contenido incluido en la página 5
Bluetooth Microphone (Accessory !) (see page 8) Cooling fan FUSE ( 15A ) Accessory 1 REVERSE REMO.CONT White/Black To front left speaker + White Gray/Black ILLUMI To front right speaker + Gray Green/Black MUTE To rear left speaker + Green Purple/Black To rear right speaker + ANT. CONT Purple P CONT EXT.CONT | English 5
Resumen del contenido incluido en la página 6
System Connection USB terminal (iPod) USB device (commercially available) USB terminal USB device (commercially available) iPod ■ Visual input (iPod) Resistance-free mini plug ■ Audio input (iPod) Resistance-free stereo type mini plug Accessory Accessory Accessory 4 2 3 ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual inp
Resumen del contenido incluido en la página 7
Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Output (Black) Navigation System Input Visual Output (Yellow) USB terminal USB terminal (iPod) iPod cannot be connected. USB terminal TV Tuner (Optional Accessory) Navigation System (Optional Accessory) Connection cable (Included in the TV tuner) Connection cable (Included in the Navigation System) | English 7 iPod TO MONITOR UNIT TV ANTENNA INPU
Resumen del contenido incluido en la página 8
Installing the Microphone Unit Installing the Escutcheon 1. Check the installation position of the microphone For General Motors (accessory !). 1. Cut out accessory 6 to meet the shape of the 2. Remove oil and other dirt from the installation opening of the center console. surface. 2. Attach accessory 6 to the unit. 3. Install the microphone. 4. Wire the microphone cable up to the hands-free Cut out to meet the shape of box with it secured at several positions using tape the opening in th
Resumen del contenido incluido en la página 9
For Toyota/Scion 1. Cut out accessory 6 as illustrated. Cutting line Accessory 6 2. Fold double-sided adhesive (accessory 7) along the slit and attach it to accessory 6 cut-out against the center rib as illustrated. Use 2 pieces of accessory 7 for 1 accessory 6 cut- out. 3. Attach accessory 6 cut-out to the unit. Accessory 7 | English 9
Resumen del contenido incluido en la página 10
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw Metal mounting strap (commercially available) (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 8 (M5x
Resumen del contenido incluido en la página 11
Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section . remove the two locks on the lower level. 2. Remove the Hex-head screw with integral washer Lower the frame and pull it forward as shown in (M4 × 8) on the back panel. the figure. 3. Insert the two removal tools 5 deeply into the Acce
Resumen del contenido incluido en la página 12
1 0 2 ! 3 4 5 6 7 8 9 | 12 DDX8032BT/DDX8032BTM
Resumen del contenido incluido en la página 13
- - 2 ¤ - + - | 13
Resumen del contenido incluido en la página 14
A B A B - C C PRK SW | 14 DDX8032BT/DDX8032BTM
Resumen del contenido incluido en la página 15
! 1 REVERSE REMO.CONT + ILLUMI + MUTE + + ANT. CONT P CONT EXT.CONT | 15
Resumen del contenido incluido en la página 16
iPod 2 3 4 | 16 DDX8032BT/DDX8032BTM RELAY 2 SUB REAR VIEW FRONT AV IN2 AV IN1 AV OUT REAR CENTER RELAY 1 WOOFER CAMERA
Resumen del contenido incluido en la página 17
| 17 iPod TO MONITOR UNIT TV ANTENNA INPUT
Resumen del contenido incluido en la página 18
! 6 6 ! 6 0 0 | 18 DDX8032BT/DDX8032BTM
Resumen del contenido incluido en la página 19
6 6 7 6 6 7 6 7 | 19
Resumen del contenido incluido en la página 20
8 9 8 9 | 20 DDX8032BT/DDX8032BTM
