Resumen del contenido incluido en la página 4
SAFETY SUMMARY (continued) GENERAL Any LEDs used in this product are Class 1 LEDs as per IEC 825-l. ENVIRONMENTAL CONDITIONS With the exceptions noted, all instruments are intended for indoor use in an installation category II, pollution degree 2 environment. They are designed to operate at a maximum relative humidity of 95% and at altitudes of up to 2000 meters. Refer to the specifications tables for the ac mains voltage requirements and ambient operating temperature range. Exceptions: Agilent
Resumen del contenido incluido en la página 5
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Agilent Technologies Inc. Manufacturer’s Address: 140 Green Pond Road Rockaway, New Jersey 07866 U.S.A. declares that the Product Product Name: a) Single Output System Power Supply b) General Purpose Power Supply Model Number: a) Agilent 6641A, 6642A, 6643A, 6644A, 6645A b) Agilent 6541A, 6542A, 6543A, 6544A, 6545A conforms to the following Product Specifications: 1 Safety: IEC 348:1978 / HD 401S1: 1981 EM
Resumen del contenido incluido en la página 6
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Agilent Technologies Inc. Manufacturer’s Address: 140 Green Pond Road Rockaway, New Jersey 07866 U.S.A. declares that the Product Product Name: a) Single Output System Power Supply b) General Purpose Power Supply Model Number: a) Agilent 6651A, 6652A, 6653A, 6654A, 6655A b) Agilent 6551A, 6552A, 6553A, 6554A, 6555A conforms to the following Product Specifications: 1 Safety: IEC 348:1978 / HD 401S1: 1981 EM
Resumen del contenido incluido en la página 7
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Agilent Technologies Inc. Manufacturer’s Address: 140 Green Pond Road Rockaway, New Jersey 07866 U.S.A. declares that the Product Product Name: a) Single Output System Power Supply b) General Purpose Power Supply Model Number: a) Agilent 6671A, 6672A, 6673A, 6674A, 6675A b) Agilent 6571A, 6572A, 6573A, 6754A, 6575A conforms to the following Product Specifications: 1 Safety: IEC 348:1978 / HD 401S1: 1981 EM
Resumen del contenido incluido en la página 8
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: Agilent Technologies Inc. Manufacturer’s Address: 140 Green Pond Road Rockaway, New Jersey 07866 U.S.A. declares that the Product Product Name: Single Output System Power Supply Model Number: Agilent 6680A, 6681A, 6682A, 6683A, 6684A conforms to the following Product Specifications: 1 Safety: IEC 348:1978 / HD 401S1: 1981 EMC: CISPR 11:1990 / EN 55011:1991 - Group 1 Class A IEC 801-2:1991 / EN 50082-1:1992
Resumen del contenido incluido en la página 9
Table Of Contents 1 General Information Introduction ...................................................................................................................................................15 Safety Considerations................................................................................................................................16 Instrument Identification .............................................................................................................
Resumen del contenido incluido en la página 10
4 User Connections Rear Panel Connections.................................................................................................................................57 Load Wire Selection....................................................................................................................................57 Analog Connector........................................................................................................................................58 Digital Conn
Resumen del contenido incluido en la página 11
A Calibration Introduction ...................................................................................................................................................93 Equipment Required...................................................................................................................................93 General Procedure ......................................................................................................................................93 Parame
Resumen del contenido incluido en la página 12
F Using Agilent 668xA Series Power Supplies in Autoparallel Auto parallel Procedure...............................................................................................................................129 Index References ...................................................................................................................................................131 Agilent Sales and Support Offices Contacts............................................................................
Resumen del contenido incluido en la página 13
List of Figures 2-1. Series 664xA/665xA Power Connection..................................................................................45 2-2. Connecting the Series 667xA Power Cord...............................................................................46 2-3. 667xA Connection to a 3-Phase Line.......................................................................................47 2-4. Series 668xA Overall Wiring Diagram..............................................................
Resumen del contenido incluido en la página 14
List of Tables l-la. Performance Specifications - Series 664xA.............................................................................20 l-lb. Supplemental Characteristics - Series 664xA ..........................................................................21 1-2a. Performance Specifications - Series 665xA............................................................................25 1-2b. Supplemental Characteristics - Series 665xA .......................................................
Resumen del contenido incluido en la página 15
1 General Information Introduction Two guides are shipped with your power supply - an Operating Guide (this document) and a Programming Guide. You will find information on the following tasks in these guides: 1 Quick Document Orientation Topic Location Calibrating the power supply Appendix A - this guide Compatibility programming language Appendix B - Programming Guide Configuring the digital port Appendix D - this guide Line voltage: Connecting ac power source Chapter 2 - this guide Convert
Resumen del contenido incluido en la página 16
Safety Considerations This power supply is a Safety Class 1 instrument, which means it has a protective earth terminal. That terminal must be connected to earth ground through a power source equipped with a 3-wire ground receptacle. Refer to the Safety Summary page at the beginning of this guide for general safety information. Before installation or operation, check the power supply and review this guide for safety warnings and instructions. Safety warnings for specific procedures are located at
Resumen del contenido incluido en la página 17
List of Options (continued) Option Description Used with Agilent Series 664xA 665xA 667xA 668xA Rack mount kit with handles (Agilent 5062-3975) x 909 909 Rack mount kit with handles (Agilent 5062-3983) Support xx rails (E3663A) are required. Rack mount kit with handles (Agilent 5062-3983 & x 5062-3974) Support rails (E3663A) are required. 910 Service manual with extra Operating and Programming xx x x Guides ABD Quick-Start Guide German x x x x ABE Quick-Start Guide, Spanish x x x x ABF Quick-St
Resumen del contenido incluido en la página 18
Operational features include: ■ Constant voltage (CV) or constant current (CC) output over the rated output range. ■ Built-in overvoltage (OV), overcurrent (OC), and overtemperature (OT) protection. ■ Automatic turn-on selftest. ■ Pushbutton nonvolatile storage and recall of up to 5 operating states (4 in Series 668xA supplies). ■ Local or remote sensing of output voltage. ■ Auto-parallel operation for increased total current. ■ Series operation for increased total voltage. ■ Analog input for re
Resumen del contenido incluido en la página 19
Output Characteristic General The power supply can operate in either CV (constant voltage) or CC (constant current) over its voltage and current ratings (see Table 1-l). The operating locus is shown by the Output Characteristic Curve in Table 1-2. The operating point is determined by the voltage setting (V ), the current setting (I ), and the load impedance. Two operating points are shown. s s Point 1 is defined by the load line cutting the operating locus in the constant-voltage region
Resumen del contenido incluido en la página 20
1 Table 1-1a. Performance Specifications for Series 664xA Parameter Agilent Model Number 6641A 6642A 6643A 6644A 6645A Output Ratings Voltage: 0 - 8 V 0 - 20 V 0 - 35 V 0 - 60 V 0 - 120 V Current:@ 40°C 0 - 20 A 0 - 10 A 0 - 6 A 0 - 3.5 A 0 - 1.5 A Current:@ 50°C 0 - 18 A 0 - 9 A 0 - 5.4 A 0 - 3.2 A 0 - 1.4 A Current:@ 55°C 0 - 17 A 0 - 8.5 A 0 - 5.1 A 0 - 3.0 A 0 -1.4 A Programming Accuracy (@ 25 ± 5 °C) 5 mV 15 mV Voltage: 0.06% +
Resumen del contenido incluido en la página 1
OPERATING GUIDE
GPIB DC POWER SUPPLIES
Agilent Technologies Models
664xA, 665xA, 667xA, and 668xA
AGILENT Model 6641A: 3217A-00111 and Above *
AGILENT Model 6642A: 3204A-00111 and Above *
AGILENT Model 6643A: 3205A-00111 and Above *
AGILENT Model 6644A: 3213A-00111 and Above *
AGILENT Model 6645A: 3215A-00111 and Above *
AGILENT Model 6651A: 3130A-00171 and Above *
AGILENT Model 6652A: 3201A-00381 and Above *
AGILENT Model 6653A: 3145A-00551 and Above *
AGILENT Model 6654A: 3148A-00391 and Abov
Resumen del contenido incluido en la página 2
CERTIFICATION Agilent Technologies certifies that this product met its published specifications at time of shipment from the factory. Agilent Technologies further certifies that its calibration measurements are traceable to the United States National Bureau of Standards, to the extent allowed by the Bureau’s calibration facility, and to the calibration facilities of other International Standards Organization members. WARRANTY This Agilent Technologies hardware product is warranted against defec
Resumen del contenido incluido en la página 3
SAFETY SUMMARY The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer’s failure to comply with these requirements. BEFORE APPLYING POWER. Verify that the product is set to match the availa
