Resumen del contenido incluido en la página 1
Full Weather Station with Radio Controlled Clock
and Projection
(Model #:PS L02A)
User Manual
PS-L02A English Cover r8 op 1 2/13/04, 10:45 AM
Black
EN
Resumen del contenido incluido en la página 2
Projector ................................................................. 18 TABLE OF CONTENTS Reset system ........................................................... 19 About this guide ........................................................ 2 Safety and care ....................................................... 20 Product overview ....................................................... 3 Warnings ................................................................. 20 Getting started .......
Resumen del contenido incluido en la página 3
In this box, you will find: ABOUT THIS GUIDE Congratulations on your selection of the Philippe Starck • Main unit with Oregon Scientific Full Weather Station with Radio • Remote sensor Controlled Clock and Projection (PS L02A). This • Batteries innovative time piece provides not only time keeping, • AC/DC power adapter but also alarm clock, indoor and wireless outdoor temperature, humidity monitoring, weather forecast, and projection clock features into one convenient package. Keep this manual h
Resumen del contenido incluido en la página 4
PRODUCT OVERVIEW DESCRIPTIONS 1. Snooze/Light and Projection Button TOP VIEW 2. Light sensor 3. Projection lens 1 2 3 3 PS-L02A English r8 op 3 2/13/04, 12:28 PM Black EN
Resumen del contenido incluido en la página 5
LCD DISPLAY DESCRIPTIONS 1. Low batteries icon 1 2. Clock 3. Barometer 4. Weather forecast 5. Moon phase 2 6. Calendar 7. Temperature and humidity 8. Alarm 3 7 4 8 5 6 4 PS-L02A English r8 op 4 2/13/04, 12:28 PM Black EN
Resumen del contenido incluido en la página 6
BACK VIEW BUTTON DESCRIPTIONS 1. Focus – focus projector 2. Select – switch modes / change settings 3. Rotation – rotate projector 1 4. Up – increase setting / activate auto-synch 2 5. Down – decrease setting / deactivate auto-synch 6. Alarm –activate / deactivate alarm 3 7. Channel – switch remote unit 4 5 6 7 5 PS-L02A English r8 op 5 2/13/04, 12:28 PM Black EN
Resumen del contenido incluido en la página 7
BOTTOM VIEW DESCRIPTIONS 1. Battery compartment 2. Light sensitivity knob 3. Reset button 4. Backlight switch 5. DC power input jack 1 2 3 4 5 NOTE AC power adapter not shown. 6 PS-L02A English r8 op 6 2/13/04, 12:28 PM Black EN
Resumen del contenido incluido en la página 8
REMOTE UNIT DESCRIPTIONS 1. Temperature / Trend display 1 2. Low battery icon 4 3. Humidity / Trend / Comfort Level display 2 5 4. °F / °C switches 6 5. Channel switches 6. Reset button 7 7. Battery compartment 3 8. Wall-mount hole 9. Battery compartment lid 8 9 7 PS-L02A English r8 op 7 2/13/04, 12:28 PM Black EN
Resumen del contenido incluido en la página 9
GETTING STARTED NOTE Insert the batteries in the remote unit before you set up the main unit. Do not use rechargeable BATTERIES batteries. Batteries for the remote and main units are supplied with this product. Replace them whenever the low AC POWER ADAPTER battery signal ( ) displays. Remove the battery An AC power adapter is supplied for use with the main compartment lid on the bottom of the main unit, and unit. You must connect the power adapter if you wish insert the batteries. Use a
Resumen del contenido incluido en la página 10
SWITCH BETWEEN MODES NOTE Additional remote units sold separately. If you Press SELECT. The select mode will flash. The display are using more than one remote unit, be sure to select a will stop flashing if no key is pressed within 5 seconds. different channel number for each unit. CHANGE SETTINGS INSTALLATION Press and hold SELECT for 2 seconds. Then, press UP Mount the remote unit on a flat surface using the recess or DOWN to change each setting. Press SELECT to holes on the back of the un
Resumen del contenido incluido en la página 11
• Position the unit so that it faces the main (indoor) RECEPTION unit. Minimize obstructions such as doors, walls, Reception takes 2 – 10 minutes to complete. Once and furniture. complete, the icon will stop blinking. You may need to experiment with various locations to Strong signal Weak signal No signal get the best reception. CLOCK This product can automatically synchronize the date and time with the US Atomic Clock. When the unit is within NOTE For best results, place the unit away from
Resumen del contenido incluido en la página 12
TO DISABLE OR ENABLE AUTO- ALARM SYNCHRONIZATION When activated, the Melody Alarm starts quietly, then In Clock mode, press DOWN for 2 seconds to disable gradually becomes louder. It shuts off after two minutes. the auto-synchronization. The unit will not respond to The LCD display lights up for the first 8 seconds. radio signals until you reactivate the synchronization. SET ALARM To enable auto-reception, press UP for 2 seconds. 1. Press SELECT several times until the Alarm area flashes. SET OR
Resumen del contenido incluido en la página 13
SNOOZE 1. Press SELECT several times until the calendar Press the SNOOZE/LIGHT button the top of the unit area flashes. to temporarily disable the alarm for 8 minutes. The 2. Press and hold SELECT for 2 seconds to enter alarm icon will blink while Snooze is activated. the calendar setting mode. 3. Select the year, month, date, and language. Press TO TURN THE ALARM OFF OR ON UP or DOWN to change the setting. Press Press any button to stop the alarm. SELECT to confirm. To turn the alarm off compl
Resumen del contenido incluido en la página 14
BAROMETER Description Pressure change Trend This product tracks barometric pressure changes (mb/hPa) over the past 24 hours to provide the weather forecast 1 hr 6 hr ( → pg.14) and a trend line showing the direction of Rising +1 +3 barometric change. Barometric changes are measured by the main (indoor) unit. Steady Steady Steady BAROMETRIC TREND The barometric trend arrow for the last 30 minutes is always displayed. Failing -1 -3 VIEW THE LAST 24 HOURS Press SELECT 2 times until the Barometer A
Resumen del contenido incluido en la página 15
SET UNIT AND ALTITUDE WEATHER FORECAST You can set the unit of measurement (mb/hPa or inHg) This product forecasts the next 12 to 24 hours of and altitude. Setting the altitude allows the product to weather within a 19 - 31 mile (30 to 50 km) radius with take more accurate barometric measurements. 70 to 75 percent accuracy. The weather forecast is always displayed. 1. Press SELECT 2 times until the Barometer Area flashes. Partly Clear Cloudy Rainy 2. Press and hold SELECT for 2 seconds. Cloudy
Resumen del contenido incluido en la página 16
Outdoor measurements are collected by the remote SELECT REMOTE UNIT CHANNEL unit. While in the Temperature / Humidity Mode, press CHANNEL to switch between CH 1, 2, or 3, or press Temperature is give at the top; humidity is below. and hold CHANNEL for 2 seconds to enter Auto scan mode. If only 1 remote unit is in use, you will not be VIEW MIN / MAX / CURRENT MEASUREMENTS able to change channels or Auto scan. If you select Press SELECT 3 times until the Temperature and “Auto”, the channel will
Resumen del contenido incluido en la página 17
COMFORT ZONE Searching No sensor Sensor found The indoor and outdoor comfort zones are shown for the following conditions. Zone T Temperature emperature Relative Humidity NOTE Signals from household electrical appliances Any >70% such as doorbells and home security systems can Wet cause temporary reception failures between the indoor and outdoor units. This is normal and does not affect the general performance of the product. Reception will <40% Any automatically resume once the interference
Resumen del contenido incluido en la página 18
TRENDS SET UNIT The trend arrow for the last 30 minutes always displays. While in Temperature / Humidity Mode, press SELECT Indoor and outdoor temperature and humidity trends are for 2 seconds. Press UP or DOWN to switch between shown separately. °F and °C. Press SELECT to confirm. Temperature Relative Humidity BACKLIGHT Trend Press SNOOZE/LIGHT to illuminate the backlight for +0.9 °F +3% 5 seconds. CONTINUOUS BACKLIGHT Steady Steady The AC power adapter must be plugged in to use this feature (
Resumen del contenido incluido en la página 19
2. Move it to the “AUTO” position to enable PROJECTOR continuous backlight controlled by light intensity. This product has a built-in projector for viewing time When activated, the backlight will be on and alarm status at night. whenever the unit perceives that the room is dark. 3. The Light Sensitivity knob is located in the NOTE The maximum projection range is 2 meters battery compartment. Rotate to adjust. (6 feet). The image gets larger the farther you display it. PROJECT TIME / ALARM STAT
Resumen del contenido incluido en la página 20
ROTATE IMAGE Press and hold SNOOZE/LIGHT for 2 seconds again The ROTATION switch is located on the back of the to deactivate. unit. Rotate to adjust. RESET SYSTEM FOCUS IMAGE The RESET buttons are located in the battery The FOCUS switch is located on the back of the unit. compartments for the main and remote units. Press Rotate to adjust. these buttons with the tip of a blunt object (such as a ball point pen) whenever you change the batteries, or CONTINUOUS PROJECTION whenever performance is n
