Manual de instrucciones de Oregon Scientific Wireless Pro Weather Station with USB upload WMR88

Resumen del contenido incluido en la página 1

INTRODUCTION
Wireless Pro Weather Station
Thank you for selecting the Oregon Scientific™ Wireless
with USB upload
Pro Weather Station with USB upload (WMR88 /
Model: WMR88 / WMR88A
WMR88A).
The base station is compatible with other sensors. To
USER MANUAL
purchase additional sensors, please contact your local
retailer.
CONTENTS
Sensors with this logo are compatible with this
Introduction ............................................................... 1
unit.
Packaging contents .........

Resumen del contenido incluido en la página 2

1. Wall mount holes RAIN GAUGE 2. Battery compartment 3. SEARCH: Searches for sensors or for the radio- controlled clock signal 4. RESET: Returns unit to default settings 2 x AA UM-3 5. EU / UK switch: Select the nearest radio signal 1.5V batteries (WMR88 only) 6. USB socket 4 x screws 7. AC adapter socket (Type B) 1 x rain collector 6 x washers LCD DISPLAY 1 2 ACCESSORIES - SENSORS 3 B This product can work with up to 3 sensors at any one 4 time to capture outdoor temperature, relative humi

Resumen del contenido incluido en la página 3

2. Outdoor wind sensor battery is low RAIN GAUGE 3. Wind speed level indicator Base and funnel: 4. Wind speed level description 5. Minimum wind chill is displayed 6. Wind direction display 2 C UVI / Barometer / Rainfall Area 1 3 1 2 1 3 4 1. Rain gauge 5 6 7 2. Battery compartment 1. UVI / barometer / rainfall reading is displayed 3. RESET button 2. Past 24hrs rainfall is displayed 3. Outdoor UV / rain sensor battery is low 4. UVI / barometric pressure (mmHg, inHg or mb) / rainfall reading

Resumen del contenido incluido en la página 4

To insert batteries: SET UP BASE STATION NOTE Install batteries in the remote sensors before the base station matching the polarities (+ and -). 2 1 1. Unscrew the anemometer from the wind sensor For continuous use, please install the AC adaptor. The carefully. batteries are for back-up use only. 2. Insert batteries matching the polarities (+ / -) and NOTE Make sure the adaptor is not obstructed and is replace the anemometer. Press RESET after each easily accessible to the unit. batt

Resumen del contenido incluido en la página 5

a. Align the back of the sensor connector to an existing WIND SENSOR pole. Secure in place by inserting the ends of the U-bolt into the holes on the sensor connector and securing it with washers and bolts. OR b. Insert 4 type A screws into the holes of the sensor connector. Screw firmly into place, i.e., fence. Slide wind vane onto the smaller end of the sensor connector. Press SELECT until the selected area icon is in the top right display area. • Wind speed: Gently rotate the wind vane

Resumen del contenido incluido en la página 6

To ensure a level plane: 2. Press and hold SEARCH. Put a few drops of water on the cross at the base of the appears when it is enabled. funnel to check the horizontal level. NOTE For best reception, the base station should be placed on a flat, non-metallic surface near a window in an upper floor of your home. The antenna should be placed 1 away from electrical appliances and not be moved around when searching for a signal. 3 2 CLOCK / CALENDAR 4 To set the clock manually, disable the cloc

Resumen del contenido incluido en la página 7

To view temperature (Current / Max / Min temperature) AUTO SCANNING FUNCTION readings: To activate the outdoor temperature and humidity 1. Press SELECT to navigate to the Temperature Area. auto-scan function: will show next to the Area. 1. Press SELECT to navigate to the Temperature or 2. Press UP / DOWN to select the channel. Humidity Area. will show next to the Area. 3. Press MAX / MIN to toggle between current / MAX / 2. Press and hold MODE to activate auto-scan. The MIN displays.

Resumen del contenido incluido en la página 8

To view the UV / Barometer / Rainfall readings: The wind level is shown by a series of icons: 1. Press SELECT to navigate to the UV / Barometer / ICON LEVEL DESCRIPTION Rainfall Area. will show next to the Area. N/A <2 miles/h (<4km/h) 2. Press MODE to toggle between UVI / Barometer / Rainfall readings. The corresponding icon will Light 2-8 miles/h (3-13 km/h) appear: UVI BAROMETER RAINFALL Moderate 9-25 miles/h (14-41 km/h) Strong 26-54 miles/h (42-87 km/h) To select the measurement unit fo

Resumen del contenido incluido en la página 9

RAINFALL SPECIFICATIONS To view the recorded rainfall of the current hour or BASE STATION last 24 hours: Dimensions 180mm x 110mm x 47mm 1. Press SELECT to navigate to the UVI / Barometer / (L x W x H) (7.1 x 4.3 x 1.9 inches) Rainfall Area. will show next to the Area. Weight 286g (10 ounces) without 2. Press MODE repeatedly to select Rainfall display. battery 3. Press MAX / MIN repeatedly to toggle between Battery 6V adaptor; 4 x UM-3 (AA) 1.5V current hour or past 24 hour rainfall. IND

Resumen del contenido incluido en la página 10

• Please note that some units are equipped with a Memory Max wind speed battery safety strip. Remove the strip from the battery Battery 2 x UM-3 (AA) 1.5V batteries compartment before first use. OUTDOOR TEMPERATURE / HUMIDITY UNIT NOTE The technical specifications for this product and Dimensions 92 x 60 x 20 mm the contents of the user manual are subject to change (L x W x H) (3.6 x 2.4 x 0.79 in) without notice. Weight 62 g (2.22oz) without battery NOTE Features and accessories will not b

Resumen del contenido incluido en la página 11

FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found