Resumen del contenido incluido en la página 1
FORCE BLOWER Owner’s Manual
Patent #6,253,416 and other patents pending
F901S, F901H, and F1301H
BILLY GOAT FORCE BLOWER
Owner's Manual
Accessories
HOLD DOWN KIT PARKING BRAKE
Effective and Easy to
To secure blower for
transportation on use to prevent blower
trailer floors. from rolling.
P/N 440120 P/N 440140
Part No 440021 Form No F071307B
Resumen del contenido incluido en la página 2
FORCE BLOWER Owner’s Manual ABOUT THIS MANUAL ® THANK YOU for purchasing a BILLY GOAT FORCE Blower. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your FORCE Blower in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS SERIAL PLATE DATA AND SPECIFICA
Resumen del contenido incluido en la página 3
FORCE BLOWER Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications F901S F901H F1301H Engine: HP 9.0 HP (6.6kW) 9.0 HP (6.6kW) 13.0 HP (9.6kW) Engine: Model EX270D50021 GX270K1QA2 GX390K1QAA2 Engine: Type SUBARU OHC HONDA OHV HONDA OHV Engine: Fuel Capacity 6.4 qt. (6.1L) 6.3 qt. (6.0L) 6.5 qt. (6.1L) Engine:
Resumen del contenido incluido en la página 4
FORCE BLOWER Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equ
Resumen del contenido incluido en la página 5
FORCE BLOWER Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment
Resumen del contenido incluido en la página 6
FORCE BLOWER Owner’s Manual SOUND SOUND LEVEL 90 Db(a) at Operators Position Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 5-17- 2006 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. General Conditions:
Resumen del contenido incluido en la página 7
FORCE BLOWER Owner’s Manual INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT FORCE Blower. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. LABEL REA
Resumen del contenido incluido en la página 8
FORCE BLOWER Owner’s Manual PACKING CHECKLIST These items should be included in your carton. If any of these parts are missing, contact your dealer. ® Your BILLY GOAT FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembl
Resumen del contenido incluido en la página 9
FORCE BLOWER Owner’s Manual ASSEMBLY 1.Follow the steps in figures A and B, then securely tighten all hardware shown. 2.Connect spark plug wire. Figure A Figure B The hardware for attaching the upper handle to the lower The throttle control and will be attached to the throttle arm is in the parts bag. Install upper handle (item 30), to on the engine and wrapped around the engine for preassembled lower handle (item 28) by sliding the upper shipping. Unwrap a
Resumen del contenido incluido en la página 10
FORCE BLOWER Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gaso
Resumen del contenido incluido en la página 11
FORCE BLOWER Owner’s Manual ADJUSTING AIR DIRECTOR TM To adjust air direction, squeeze Aim-N-Shoot control lever. When you want to blow debris at the same angle for an extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position. TM For operations that do not require the use of the Aim-N-Shoot feature the manual adjustment knob, pictured below, can be used to permanently lock the cone into position. NOTE: be sure to rele
Resumen del contenido incluido en la página 12
FORCE BLOWER Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Daily or Every Every 25 Every 50 Every Use 5 Hours Hours Hours 100-150 Hours Inspect for worn or damaged parts. Check for excessive vibration Inspect Impeller for cracks or damage Inspect for loose parts. IMPELLER REMOVAL 1. Wait for engine to cool and disconnect spark plug. 2. Remove housing f
Resumen del contenido incluido en la página 13
FORCE BLOWER Owner’s Manual TROUBLESHOOTING Problem Possible Cause Solution Abnormal vibration. · Loose or out of balance impeller. · Check impeller and replace if required. · Debris in impeller. · Clear debris with compressed air or a backpack blower (see below pictures).* · Loose engine. · Check engine. Engine will not start. · Engine not in full choke position. · Check choke position. · Out of gasoline or bad, old gasoline. · Check gasoline. · Spark Plug wire disconnected. ·
Resumen del contenido incluido en la página 14
FORCE BLOWER Owner’s Manual ILLUSTRATED PARTS LIST Part No 440021 Form No F071307B 14
Resumen del contenido incluido en la página 15
FORCE BLOWER Owner’s Manual PARTS LIST F1301H F901H F901S ITEM NO. DESCRIPTION PART NUMBER QTY. PART NUMBER QTY. PART NUMBER QTY. 1 ENGINE 13 HP HONDA GX390 440018 1 - - - - ENGINE 9 HP HONDA GX270 - - 430287 1 - - ENGINE 9 HP HORZ SUBARU OHC - - - - 430413 1 2 BASE ENGINE WA 440011 1 440011 1 440011 1 3 SPACER RING ENGINE 440009 1 440009 1 440009 1 4 PLATE REINFORCE HOUSING 440010 2 440010 2 440010 2 5 HOUSING FRONT MOLDED 440023 1 440023 1 440023 1 6 HOUSING BACK MOLDED 440024
Resumen del contenido incluido en la página 16
FORCE BLOWER Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 440021 Form No F071307B 16
