Manual de instrucciones de Ryobi FL1400

Resumen del contenido incluido en la página 1

■ USE ONLY BATTERY PACK PART NUMBER
1311148 or 130147008 WITH FLASHLIGHT MODEL
FL1200 AND PART NUMBER 1314702, 130224011
or 130224010 WITH MODEL FL1400. Any attempt to
use another battery pack will cause damage to your
OPERATOR'S MANUAL
flashlight and could possibly explode, cause a fire, or
personal injury.
CORDLESS FLASHLIGHT
■ REMOVE BATTERY PACK FROM FLASHLIGHT
MODEL NO. FL1200 (12 VOLT) BEFORE REPLACING BULB OR PERFORMING ANY
ROUTINE MAINTENANCE OR CLEANING.
MODEL NO. FL1400 (14.4 VOLT)
■ D

Resumen del contenido incluido en la página 2

RULES FOR SAFE OPERATION (Continued) c. That wire size is large enough for AC ampere rating ■ Your battery tool should be charged in a location where of charger as specified below: the temperature is more than 50°F but less than 100°F. Cord Length (Feet) 25 50 100 ■ Under extreme usage or temperature conditions, bat- Cord Size (AWG) 16 16 16 tery leakage may occur. If liquid comes in contact with Note: AWG = American Wire Gage your skin, wash immediately with soap and water,

Resumen del contenido incluido en la página 3

OPERATION CHARGING YOUR FLASHLIGHT The battery pack and charger are not included with this CAUTION: flashlight. They are both sold separately. If you decide to When placing battery pack in your flashlight, be sure raised purchase a battery pack and charger, request recommended ribs on battery pack aligns with groove inside flashlight battery pack part number 1311148 or 130147008 for Model handle and latches snap in place properly. Improper FL1200 and battery pack part number 1314702, 130224010

Resumen del contenido incluido en la página 4

OPERATION SWITCH See Figure 2. To turn your flashlight on and off, depress switch trigger. 180° ROTATING HEAD See Figure 2. Your flashlight has the feature of rotating the head 180° back and forth. BULB REPLACEMENT SWITCH See Figure 3. TRIGGER When purchasing replacement bulb, request recommended 180° ROTATING HEAD part number 973638-001 for Model FL1200 and part number 981258-003 for Model FL1400. TO REPLACE BULB: ■ Remove battery pack from flashlight. ■ Remove lens cover by turning cover in c

Resumen del contenido incluido en la página 5

MAINTENANCE DO NOT abuse power tools. Abusive practices can damage tool as well as workpiece. WARNING: When servicing, use only identical replacement parts. WARNING: Use of any other part may create a hazard or cause product damage. Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not at any time let brake

Resumen del contenido incluido en la página 6

OPERATOR'S MANUAL CORDLESS FLASHLIGHT MODEL NO. FL1200 (12 Volt) MODEL NO. FL1400 (14.4 Volt) • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Center