Manual de instrucciones de SkyLink WR-001

Resumen del contenido incluido en la página 1

Wall Dimmer Model WR-001
1. INTRODUCTION 3. PROGRAMMING TRANSMITTERS (TC SERIES) / SENSORS
TM
Thank you for your purchase of a SkylinkHome lighting receiver, Wall In order to operate the Wall Dimmer remotely with a transmitter or sensor,
Dimmer, Model WR-001. Simply replace your existing wall switch with this it must be programmed to the Wall Dimmer. Each module can be operated
Wall Dimmer, you can then wirelessly turn on and off, dim and brighten by up to 8 different transmitters (or 8 diff

Resumen del contenido incluido en la página 2

3. PROGRAMMING TRANSMITTERS (TC SERIES) / SENSORS (CONT) 5. REGULAR OPERATING MODE (CONT) 4. Within 15 seconds, follow steps A) to C). 1. Turn on the light by the programmed transmitter or touch pad. A). Press the PROG button on the back of the TC transmitter with a sharp 2. Press and hold the button on the transmitter that is programmed to object. the Wall Dimmer for 10 seconds or touch the touch pad for 10 seconds B). Press the button on the TC transmitter that you woul

Resumen del contenido incluido en la página 3

8. ZONE OPERATION 12. WARRANTY If, within one year from date of purchase, this product should become defective An optional deluxe remote is needed for zone operation. A Zone Command (except battery), due to faulty workmanship or materials, it will be repaired or allows you to operate multiple lights altogether in the same zone. replaced, without charge. Proof of purchase and a Return Authorization are required. A zone command must first be programmed to the receiver before zone operation. T