Manual de instrucciones de Black Widow Security BW1700

Resumen del contenido incluido en la página 1

BW1700
VEHICLE SECURITY SYSTEM
VEHICLE SECURITY SYSTEMS
INSTALLATION MANUAL
Before you begin installation 8-Pin Harness:
• VIOLET WIRE - Auxiliary output (-) 300mA.
• Read the INSTRUCTIONS!
Connect to an optional relay for trunk release, etc.
• Always use a multi-meter when verifying vehicle
• ORANGE WIRE - Siren output (+) 1A.
wiring.
Connect to the siren’s red wire. Connect the
• Before mounting, verify the customer’s desired
siren’s black wire to ground.
location for the valet switch and LED.

Resumen del contenido incluido en la página 2

Plug in Connectors Sensor T est Mode 2-Pin Red Connector: Plug-in connector port The Sensor Test Mode allows shock sensitivity for LED. Mount LED in an area where it may be adjustment without arming the system. easily seen from either side of the vehicle. To enter Sensor Test Mode: 3-Pin White Connector: Plug-in connector port 1. Turn the ignition on. for dual stage shock sensor. 2. Press the Valet switch 5 times and hold on 2-Pin Blue Connector: Plug-in connector port the last press for 3 secon

Resumen del contenido incluido en la página 3

DOOR LOCK WIRING DIAGRAMS NEGATIVE PULSE LOCK SYSTEM POSITIVE PULSE LOCK SYSTEM (-) DOOR LOCK L Y ORCTA F DOOR LOCK (-) DOOR UNLOCK UL YSRELA LOCK/UNLOCK SWITCH WN O BR WHITE ADDING ACTUATORS VACUUM LOCK SYSTEM +12V CUUM A V PUMP AFTER-MARKET 87 85 86 87 ORST CTU A A 87a W OBRN WHITE 87a 86 85 30 30 +12V CUT X 87 86 85 87 87a WHITE WN O BR 87a L 86 85 30 30 UL LOCK/UNLOCK SWITCH REVERSE POLARITY LOCK SYSTEM L +12V UL 87 WHITE CUT LOCK/UNLOCK X 87a 86 85 SWITCH 30 87 WN O BR CUT Y ORCTA F DOOR 87

Resumen del contenido incluido en la página 4

1234 WIRING DIAGRAM Valet Jumper Cover Shock Sensor LED Violet Auxiliary 1 output Orange Siren output (+) 1.25A Black/Yellow Armed output (-) 300mA Black/White Door trigger input (-) Pink Ignition input (+) White Unlock output (-) 300mA Brown Lock output (-) 300mA Jumper Cover removed Black Ground default settings pictured Yellow Parking light output (+) built-in relay Red +12V Battery input RELAY WIRING DIAGRAMS STARTER DISABLE TRUNK RELEASE TO TRUNK 87 86 85 RELEASE WIRE BLACK/YELLOW PIN