Manual de instrucciones de Harbor Freight Tools Warrior 11 Piece Carbon Steel Hole Saw Set 68114

Resumen del contenido incluido en la página 1

Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
11 PIECE CARBON
STEEL HOLE SAW SET
ITEM 68114 69070
Visit our website at: http://www.har

Resumen del contenido incluido en la página 2

Specifications Type Carbon Steel Piece Count 11 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, Saw Sizes 2-1/8″, 2-1/4″, 2-1/2″ Large Mandrel Other Pieces Pilot Drill Bit Blow Molded Case IMPORTANT SAFETY INFORMATION 1. Wear ANSI-approved safety goggles 8. Use both hands when drilling and and heavy-duty work gloves keep blade at 90° to workpiece. during setup and use. 9. Store saw blades in Case in secure 2. Set contains sharp blades. location away from children. Keep away from children. 10. Read and adh

Resumen del contenido incluido en la página 3

Setup TO PREVENT INJURY: Wear heavy-duty work gloves and ANSI-approved safety goggles during setup and whenever handling the Hole Saws. 1. Select the desired size Hole Saw. 2. Unthread the Mandrel Nut from Pilot the back of the Mandrel. Drill Bit 3. Insert the Mandrel through the center of the Hole Saw, and secure in place using the Mandrel Nut. Set Make sure the Hole Saw is held Screw securely by the Mandrel Nut. 4. Open Jaws of Drill Chuck (sold separately). 5. Place the Mandrel

Resumen del contenido incluido en la página 4

Operation 1. Holding the drill at 90° to the workpiece, 5. When finished, remove set the Hole Saw on the workpiece. the Hole Saw from drill’s chuck. 2. Press the drill’s trigger to turn it on. 6. Remove Hole Saw from the Mandrel and clean off Hole Saw with a cloth. 3. If the drill is a variable speed type, cut the workpiece slowly until a circle 7. Store the Hole Saws inside case, groove is made in the workpiece. out of reach of children. Then cut faster. 8. Replace the Pilot Drill Bit if