Resumen del contenido incluido en la página 1
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-SH9104/KD-SH9103/
KD-SH9102/KD-SH9101
ATT
ANGLE
EQ
CD
DAB DISC
FM
PRESET PRESET
R D
AM
MOSFET KD-SH9101
SRC D
CH
DISC
DISP
T/P
AUX SEL ATT
VOLUME
MODE
SEL
1 2 3456 M
RM-RK100
This unit is equipped with the display demonstration. To cancel it, see page 8.
Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf
Seite 8 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
Cet appareil est équipé
Resumen del contenido incluido en la página 2
Position And Reproduction Of Labels Bottom panel of the main unit CAUTION: Invisible laser ADVARSEL: Usynlig laser- VARNING: Osynlig laser- VARO: Avattaessa ja radiation when open and stråling ved åbning, når strålning när denna del är suojalukitus ohitettaessa interlock failed or defeated. sikkerhedsafbrydere er ude öppnad och spärren är olet alttiina näkymättö- A VOID DIRECT EXPOSURE af funktion. Undgåudsæt- urkopplad. Betrakta ejmälle lasersäteilylle. TO BEAM. (e) telse for
Resumen del contenido incluido en la página 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .............................. 2 SOUND ADJUSTMENTS .................. 37 Performing the basic sound settings ........ 37 LOCATION OF THE BUTTONS ........... 4 Control panel............................................ 4 GRAPHIC DISPLAYS ...................... 39 Remote contr
Resumen del contenido incluido en la página 4
LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 6 7 SRC D DISP T/P ATT MODE SEL 1 2 3456 M 8 9p q w e r t 1 SRC (source) button 8 • (standby/on/attenuator) button 2 DISP (D) (display) button • Control dial 35 (up) button 9 Remote sensor 4 4/¢ buttons p∞ (down) button 5 Display window q SEL (select) button 6 •0 (eject) button w Number buttons • (angle) button e MODE (M) button 7 T/P (traffic programme/programme type) r (control panel release) button button t Reset button Illumination Navigation
Resumen del contenido incluido en la página 5
7 • Searches stations while listening to the Remote controller radio. • Selects ensembles while listening to the DAB tuner. • Fast-forwards or reverses the track if ATT 1 pressed and held while listening to a disc. ANGLE 2 EQ 6 • Skips to the beginning of the next track or goes back to the beginning of the current (or CD 7 previous) tracks if pressed briefly while DAB DISC listening to a disc. FM 8 • Selects services while listening to the DAB 8 3 PRESET PRESET tuner. R D AM 4 • Changes the disc
Resumen del contenido incluido en la página 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder pushing it until Before using the remote controller: you hear a clicking sound. • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) SRC D DISP ATT SEL 1 2 34 WARNING: • Store the battery in a place where children cannot reach. Remote sensor If a child accidentally swallows the battery, consult a doctor immediately. • Do not r
Resumen del contenido incluido en la página 7
BASIC OPERATIONS Display indication: SRC D If you have changed DISP some PSM items (see T/P ATT pages 47 and 48), the MODE indications on the SEL 1 2 3456 M display you see may be different from those used in this manual. 2 1, 3 3 Adjust the volume. Turning on the power ATT 1 Turn on the power. ATT Clock time Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have Current DSP mode (see page 32) to press this button to turn on the p
Resumen del contenido incluido en la página 8
To activate the display demonstration, repeat Canceling the display the same procedure and select “Int Demo” or “All Demo” in step 3. demonstration • For more details, see “To show the graphics on the display—Graphics” on page 48. When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. Setting the clock • It is recommended to cancel the demonstration before you use the unit for the first time. You can als
Resumen del contenido incluido en la página 9
5 Set the clock system. 4 Select the level meter pattern you 1 Select “24H/12H.” want. 2 Adjust “24Hours” or “12Hours.” As you turn the control 1 ATT dial, the level meters 2 ATT change as follows: Standard Meter 1 Meter 3 Meter 2 6 Finish the setting. 5 Finish the setting. SEL SEL To check the current clock time when the unit is turned off, press DISP (D). Standard: The power turns on and the clock time is shown No level meter appears on the display. (Initially for about 5 seconds, then the pow
Resumen del contenido incluido en la página 10
RADIO OPERATIONS SRC D DISP T/P ATT MODE SEL 1 2 3456 M Note: Listening to the radio This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an You can use either automatic searching or manual FM broadcast. searching to tune in to a particular station. 2 Start searching a station. Searching a station automatically: Press ¢ to search Auto search stations of higher frequencies. 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) Press 4 to search SRC repeated
Resumen del contenido incluido en la página 11
Searching a station manually: To tune in FM stations only with strong Manual search signals—LO/DX (Local/Distant) While searching FM stations (including SSM— see page 12), this unit stops searching whenever 1 Select the band (FM1 – 3, AM). it detects signals (DX mode: The DX indicator is SRC 1 Press SRC (source) lit—initial setting). If received signals are weak, repeatedly to select the tuner. you may only hear noises. 2 Press and hold SRC for more By setting LO/DX to “Local,” you can make this
Resumen del contenido incluido en la página 12
When an FM stereo broadcast is hard to Storing stations in memory receive: You can use one of the following two methods to Set the FM reception mode to “Mono On.” store broadcasting stations in memory. MODE • Automatic preset of FM stations: SSM (Strong- 1 Press MODE (M) while listening to an FM stereo broadcast. station Sequential Memory) M “Mode” appears on the display, and • Manual preset of both FM and AM stations the number buttons start flashing. FM station automatic preset: SSM 2 Press nu
Resumen del contenido incluido en la página 13
Notes: Manual preset • A previously preset station is erased when a new You can preset up to 6 stations in each band (FM1, station is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex.: Storing an FM station of 92.5 MHz into the during battery replacement). If this occurs, preset preset number 1 of the FM1 band. the stations again. 1 Select the band (FM1 – 3, AM) you want to store
Resumen del contenido incluido en la página 14
Selecting a preset station using the Changing the display pattern preset station list By pressing DISP (D), you can change the If you forget what stations are stored in what information shown on the display. preset numbers, you can check the preset station Each time you press the button, the list, then select your desired station on the list. D display patterns change as follows: DISP 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) SRC • Initial display pattern: repeatedly to select the tu
Resumen del contenido incluido en la página 15
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
Resumen del contenido incluido en la página 16
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the current source (another FM station, CD, or (PSM: see pages 47 and 48.) other connected components). SEL • TA Standby Reception will not work if you are listening to an AM station. Press T/P to activate TA Standby T/P 2 Press number button 4 to select Reception. “TUNER”
Resumen del contenido incluido en la página 17
7 When the current source is other than FM, the TP indicator lights up. 3 Select one of the twenty-nine PTY If a station starts broadcasting a traffic codes. (See page 21.) announcement, “Traffic Flash” appears on the Selected code name display, and this unit automatically changes the ATT appears on the display source and tunes in to the station. and is stored into memory. Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favori
Resumen del contenido incluido en la página 18
2 Press number button 3 repeatedly to activate Note: PTY Standby Reception while “Mode” is still After turning on PTY Standby Reception, you can on the display. change the source without canceling PTY Standby Each time you press the button, PTY Standby Reception. In this case, the PTY indicator stops Reception turns on and off alternately. flashing if it was. If a station starts broadcasting the selected PTY programme, this unit automatically changes the source and tunes in to the station. • If
Resumen del contenido incluido en la página 19
2 To select one of your favorite 2 Select one of the twenty-nine PTY programme type codes. (See page 21.) Selected code name ATT appears on the display. 1 2 3456 or To select any one of the twenty-nine 3 Press and hold the number button PTY codes for more than 2 seconds to store the ATT PTY code selected into the preset number you want. 1 2 3456 Selected preset number flashes for a while. 4 Press and hold T/P for more than 2 Ex.: When “Rock M” is selected seconds to exit from this mode. How to u
Resumen del contenido incluido en la página 20
Setting the TA volume level Other convenient RDS You can preset the volume level for TA Standby functions and adjustments Reception. When a traffic programme is received, the volume level automatically changes to the Automatic selection of the station preset level. when using the number buttons • See also “Changing the general settings (PSM)” on page 46. Usually when you press the number button, the preset station is tuned in. 1 Press and hold SEL (select) for more than However, when the preset
