Manual de instrucciones de Whirlpool WED9200S

Resumen del contenido incluido en la página 1

®
Electric Dryer
EXHAUST VENTING
PRODUCT MODEL NUMBERS ELECTRICAL
WED9200S WED9400V
This dryer requires a three- or four-wire, single- Exhaust your dryer to the outside. 4" (10.2 cm)
WED9300V WED9500T phase, 120/240-volt, 60-Hz, AC-only electrical diameter heavy metal exhaust vent and clamps
supply (or three- or four-wire, 120/208-volt are required. Rigid or flexible heavy metal
WED9400S WED9600T
electrical supply, if specified on the serial/rating exhaust vent must be used. The total length of

Resumen del contenido incluido en la página 2

® Electric Dryer PRODUCT MODEL NUMBERS WED9200S WED9400V WED9300V WED9500T WED9400S WED9600T RECOMMENDED INSTALLATION SPACING FOR CABINET INSTALLATION NOTE: Some models are not recommended for cabinet installation. Steam Non-Steam For cabinet installation, with a door, minimum ventilation (Electric or Gas) (Electric or Gas) openings in the top of the cabinet are required. A* 7" (178 mm) 7" (178 mm) A* B* B* 7" (178 mm) 7" (178 mm) C* 9" (229 mm) 9" (229 mm) D** 5" (127 mm) 5" (127 mm) 9 1 E 32

Resumen del contenido incluido en la página 3

® Electric Dryer PRODUCT MODEL NUMBERS WED9200S WED9400V WED9300V WED9500T WED9400S WED9600T EXHAUST VENTING UNDERCOUNTER INSTALLATION Dimensions shown are for minimum spacing. A and B: Recommended hood styles. C: Acceptable hood style. B A C 4" (102 mm) A B 4" (102 mm) 2½" C* DE* (64 mm) 4" A. Louvered hood style (102 mm) B. Box hood style Steam Non-Steam C. Angled hood style (Electric or Gas) (Electric or Gas) NOTE: Side and bottom exhaust installations have a 90º turn inside