Resumen del contenido incluido en la página 1
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
KD-S7250/KD-S700/
KD-S680
KD-S7250
KD-S7250
RM-RK31
KD-S700
KD-S700
RM-RK31
KD-S680
KD-S680
COMPACT
RM-RK31
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this informat
Resumen del contenido incluido en la página 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Resumen del contenido incluido en la página 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS SOUND ADJUSTMENTS ....................14 How to reset your unit ................................. 2 Adjusting the sound ...................................... 14 LOCATION OF THE BUTTONS .............. 4 Turning on/off the loudness function ............ 14 Control panel ...........................
Resumen del contenido incluido en la página 4
LOCATION OF THE BUTTONS Control panel Display window o ; s df g a h j k l 1 2 3 4 5 6 7 8 9 p q w e u i r t y 1 (standby/on/attenuator) button Display window 2 Control dial o Volume (or audio) level indicator 3 LOUD (loudness) button Equalization Pattern indicator 4 DISP (display) button ; Tuner reception indicators 5 Display window MO (monaural), ST (stereo) 6 Loading slot a RND (random) indicator 7 CD button s RPT (repeat) indicatior 8 FM button d “SCM” indicator 90 (eject) button f LOUD indic
Resumen del contenido incluido en la página 5
3 • Functions as the PRESET button while Remote controller listening to the radio. Each time you press the button, the preset station number increases, and the selected station is tuned into. 5 • Does not function as the DISC – button. 4 Functions the same as the control dial on the 6 1 main unit. NOTE: These buttons cannot be used for the clock 2 (CLOCK H, CLOCK M), SCM LINK and 7 LEVEL (see pages 17 and 18). 3 5 Selects the sound mode. Each time you press the button, the mode 4 changes. 6 Sele
Resumen del contenido incluido en la página 6
3. Return the battery holder. Preparing the remote Insert again the battery holder pushing it controller until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote (back side) sensor on the main unit. Make sure there is no obstacle in between. WARNING: • Store the batteries in a place which children cannot reach. If a child accidentally swallows the battery, Remote sensor immediately consult a doctor. • Do not expose the remote sensor
Resumen del contenido incluido en la página 7
BASIC OPERATIONS 1 3 2 Turning on the power 4 Adjust the sound as you want (see pages 14 – 16). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the power To resume the previous volume level, press the automatically comes on. You do not have to press button briefly again. this button to turn on th
Resumen del contenido incluido en la página 8
RADIO BASIC OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. Searching a station manually: Searching a station automatically: Manual search Auto search 1 Select the band (FM1 – 3, AM). 1 Select the band (FM1 – 3, AM). FM1 FM2 FM3 FM1 FM2 FM3 AM AM Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any
Resumen del contenido incluido en la página 9
3 Tune into a station you want while “M” Storing stations in memory is flashing. You can use one of the following two methods to Press ¢ to search store broadcasting stations in memory. stations of higher • Automatic preset of FM stations: SSM (Strong- frequencies. station Sequential Memory) • Manual preset of both FM and AM stations Press 4 to search stations of lower FM station automatic preset: SSM frequencies. You can preset 6 local FM stations in each FM band • If you release your finger
Resumen del contenido incluido en la página 10
Notes: Manual preset • A previously preset station is erased when a new station You can preset up to 6 stations in each band (FM1, is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during Ex: Storing an FM station of 88.3 MHz into the battery replacement). If this occurs, preset the stations preset number 1 of the FM1 band again. 1 Select the band (FM1 – 3, AM) you want to store FM
Resumen del contenido incluido en la página 11
CD OPERATIONS Playing a CD To stop play and eject the CD Press 0. 1 Insert a disc into the loading slot. CD play stops and the CD automatically ejects from The unit turns on, the loading slot. draws a CD and starts If you change the source to FM or AM, the CD play playback automatically. also stops (without ejecting the CD this time). Note: Notes: • When a CD is inserted • If the ejected disc is not removed for about 15 seconds, upside down, the CD the disc is automatically inserted again into t
Resumen del contenido incluido en la página 12
Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) You can play back all tracks on the CD at random. To fast-forward or reverse the track Each time you press MO RND (monaural/random) while playing a CD, CD random play mode turns Press and hold ¢ , while on and off alternately. playing a CD, to fast-forward the track. Press and hold 4 , while playing a CD, to reverse the The RND indicator track. To go to the next tracks or the
Resumen del contenido incluido en la página 13
Prohibiting CD ejection You can prohibit CD ejection and can lock a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and unlock the CD, press and hold CD and 0 again for more than 2 seconds. “EJECT” appears on the display, and the CD ejects from the loading slot. 13 EN12-13 KD-S7250/700/680[J] 13 26/10/01, 8:48 AM ENGLISH
Resumen del contenido incluido en la página 14
|\ SOUND ADJUSTMENTS Turning on/off the loudness Adjusting the sound function You can adjust the sound characteristics to your preference. The human ear is less sensitive to low and high frequencies at low volumes. 1 Select the item you want to adjust. The loudness function can boost these frequencies Each time you press the button, the to produce well-balanced sound at low volume level. adjustable items change as follows: Each time you press LOUD, the loudness function turns on and off alternat
Resumen del contenido incluido en la página 15
Notes: • When “SCM LINK” is set to “LINK ON”, the • You can adjust each sound mode to your preference, selected sound mode can be stored in memory and store it in memory. for the current source and the effect applies only If you want to adjust and store your original sound to the current source. mode, see “Storing your own sound adjustments” • When “SCM LINK” is set to “LINK OFF”, the on page 16. selected sound mode effect applies to any • To adjust the bass and treble reinforcement levels or so
Resumen del contenido incluido en la página 16
5 To turn on/ off the loudness function. Storing your own sound • See page 14 for details. adjustments You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory. • There is a time limit in doing the following 6 Press and hold SCM until the sound procedure. If the setting is canceled before you finish, start from step 1 again. mode you have selected in step 1 flashes on the display. 1 Call up the sound mode you want to Your adjustment made for th
Resumen del contenido incluido en la página 17
OTHER MAIN FUNCTIONS To check the current clock time (changing Setting the clock the display mode) 1 Press and hold SEL (select) for more Press DISP repeatedly. Each time you press the than 2 seconds. button, the display mode changes as follows. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display. During tuner operation: Frequency Clock During CD operation: 2 Set the hour. Elapsed 1 Select “CLOCK H” if not shown on Clock playing time the display. 2 Adjust the hour. • If the unit
Resumen del contenido incluido en la página 18
To Cancel Advanced SCM Selecting the level display You can cancel the Advanced SCM (Sound Control You can select the level display according to your Memory), and unlink the sound modes and the preference. playback sources. When shipped from the factory, “AUDIO 2” is When shipped from the factory, a different sound selected. mode can be stored in memory for each source so AUDIO 1: Level meter illuminates from bottom to that you can change the sound modes simply by top. changing the sources. AUDIO
Resumen del contenido incluido en la página 19
How to attach the control panel Detaching the control panel 1 Insert the left side of the control You can detach the control panel when leaving panel into the groove on the panel the car. holder. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Press the right side of the co
Resumen del contenido incluido en la página 20
MAINTENANCE Moisture condensation Handling CDs Moisture may condense on the lens inside the This unit has been designed only to reproduce CD player in the following cases: the CDs bearing the following marks. • After starting the heater in the car. COMPACT • If it becomes very humid inside the car. Should this occur, the CD player may DIGITAL AUDIO You can also play back your original CD-Rs malfunction. In this case, eject the CD and leave (Recordable) and CD-RWs (Rewritable) on this the unit tu
