Resumen del contenido incluido en la página 1
Owner’s
Manual
36" Built-In
All-Refrigerators and
All-Freezers
224D2602P001
49-60562
07-08 JR
monogram.com
Resumen del contenido incluido en la página 2
Consumer Information 36” All-Refrigerator and All-Freezer Units Contents Consumer Services Operating Instructions Important Phone Numbers . . . . . . . . . . . . . . . . . . . . .27 Anti-Tip Bracket Installation . . . . . . . . . . . . . . . .16–20 Model and Serial Numbers . . . . . . . . . . . . . . . . . . . . . . .3 Automatic Icemaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Problem Solver . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21, 22 Sabbath Mode Product .
Resumen del contenido incluido en la página 3
Consumer Information 36” All-Refrigerator and All-Freezer Units You’ll see them on a label inside the Before sending in this card, please write these Write refrigerator/freezer under the storage drawers. numbers here: down the These numbers are also on the Consumer model & Product Ownership Registration Card included serial Model Number with this manual. numbers Serial Number Use these numbers in any correspondence or service calls concerning your refrigerator/freezer. The warranty does not co
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS • Your freezer has an automatic w WARNING–When using this icemaker—avoid contact with the moving appliance, always exercise basic safety parts of the ejector mechanism, or with precautions, including the following: the heating element located on the bottom of the icemaker. Do not place fingers or hands • Use this appliance only for its intended on the automatic icemaking mechanism while purpose as described in this Owner’s Manual.
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS LIRE ET CONSERVER CES INSTRUCTIONS • Le congélateur doté d’une machine w AVERTISSEMENT : à glaçons automatique—évitez le contact Lorsque vous utilisez le réfrigérateur/congélateur, avec les pièces mobiles du mécanisme éjecteur observez toujours certaines précautions de base, ou avec l’élément chauffant situé à la partie notamment : inférieure de la machine à glaçons. Ne posez pas les doigts ou les mains sur le mécanisme • N’utilisez l’appareil que pour son usage
Resumen del contenido incluido en la página 6
IMPORTANT SAFETY INSTRUCTIONS HOW TO CONNECT ELECTRICITY Do not, under any circumstances, This provides the best performance and also cut or remove the third (ground) prong prevents overloading house wiring circuits, which from the power cord. For personal safety, could cause a fire hazard from overheated wires. this appliance must be properly grounded. Never unplug your refrigerator/freezer by pulling The power cord of this appliance is equipped on the power cord. Always grip plug firmly and wi
Resumen del contenido incluido en la página 7
IMPORTANT SAFETY INSTRUCTIONS RACCORDEMENT ÉLECTRIQUE Ne coupez ni retirez en aucun cas la troisième Cette précaution est recommandée pour garantir broche (mise à la terre) de la fiche du cordon un rendement optimum et éviter une surcharge d’alimentation. Pour votre sécurité, cet des circuits électriques de la résidence, appareil doit être correctement mis à la terre. ce qui pourrait créer un risque d’incendie par surschauffe des fils. Le cordon d’alimentation de cet appareil est muni d’une f
Resumen del contenido incluido en la página 8
Temperature Controls 36” All-Refrigerator and All-Freezer Units All-Freezer Controls Preset Settings: Allow 24 hours to reach these preset temperatures. All-Refrigerator Controls Preset Settings: Allow 24 hours to reach these preset temperatures. The temperature display shows the actual To check the current temperature setting for Temperature temperature of the freezer or fresh food unit. the fresh food or freezer unit, press the plus (+) controls The actual temperature will vary from the set
Resumen del contenido incluido en la página 9
Automatic Icemaker (freezer models) 36” All-Refrigerator and All-Freezer Units A newly-installed refrigerator may take Automatic Icemaker 12–24 hours to begin making ice. icemaker The icemaker will produce seven cubes per (freezer models) cycle—approximately 15 cycles in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions. Power Feeler Arm If the refrigerator is operated before the water Switch connection is made to
Resumen del contenido incluido en la página 10
Water Filter/Storage Drawers 36” All-Refrigerator and All-Freezer Units The water filter cartridge is located in the top To Reset the Filter Status Light: Water filter machine compartment of the freezer. Press and hold the RESET pad for 3 seconds. cartridge To Replace the Filter: Filter Bypass Plug: (freezer models) The filter cartridge is designed You must use the filter bypass plug: to filter 300 gallons of water a) if you have a household (lasting approximately 12 months). reverse osmosis
Resumen del contenido incluido en la página 11
Shelves 36” All-Refrigerator and All-Freezer Units The upper drawers have individual, adjustable Refrigerator— humidity controls that let you control the amount Storage of cold air entering the drawers. drawers Slide the control all the way to the High setting and the drawer provides higher humidity levels recommended for most leafy vegetables. Slide the control all the way to the Low setting and the drawer provides lower humidity levels recommended for most fruits. Excess water that may accumul
Resumen del contenido incluido en la página 12
Shelves/Sabbath Mode 36” All-Refrigerator and All-Freezer Units The wine rack is designed to hold a bottle Removable on its side and will fit on any shelf. wine rack To relocate the wine rack: Pull the wine rack (on all straight out, position its lip over the right edge refrigerator of the shelf you want to suspend it from and push models) it all the way in. Some door shelves are adjustable and can Door be moved up and down to meet your storage shelves needs. The deeper door shelves must be p
Resumen del contenido incluido en la página 13
Care and Cleaning 36” All-Refrigerator and All-Freezer Units Door handles and trim—Clean with a cloth Stainless steel—Regularly clean and polish Cleaning dampened with soapy water. Dry with a soft cloth. the Stainless Steel Door Panels and Handles outside (on some models) with a commercially available Keep the outside clean. Wipe with a clean ™ stainless steel cleaner such as Stainless Steel Magic cloth lightly dampened with mild liquid dish to preserve and protect the fine finish. Stainless
Resumen del contenido incluido en la página 14
Care and Cleaning 36” All-Refrigerator and All-Freezer Units For long vacations or absences, remove food For shorter vacations, remove perishable foods Preparing from the refrigerator/freezer. Set the control to and leave the control at the regular setting. for vacation OFF, and clean the interior with a baking soda However, if the room temperature is expected solution of one tablespoon (15 ml) of baking to drop below 60°F (16°C), follow the same soda to one quart (1 liter) of water. Leave inst
Resumen del contenido incluido en la página 15
Preparation 36” All-Refrigerator and All-Freezer Units Do not install the refrigerator/freezer where For proper installation, the refrigerator/ Refrigerator/ temperatures will be below 60°F (16°C) because freezer must be placed on a level surface freezer it will not run often enough to maintain proper of hard material the same height as the rest location temperatures, and the refrigerator will develop of the flooring. This surface should be high internal humidity. strong enough to support a f
Resumen del contenido incluido en la página 16
Anti-Tip Bracket Installation 36” All-Refrigerator and All-Freezer Units • The kit supplied with the unit contains 2 lag Anti-tip bolts and 4 toggles with bolts. The wall bracket bracket will be attached to the wall in 4 places. installation • Measure the opening where the unit is to be installed. Mark the center with a vertical line. • Measure up 81 1/2" from the floor. Mark this point on the wall. • Using a level, draw a horizontal line on the wall at this height. • Locate at least 2 studs on
Resumen del contenido incluido en la página 17
Anti-Tip Bracket Installation 36” All-Refrigerator and All-Freezer Units Install Wall Toggles: Plastic Straps Anti-tip The wall toggles and bolts can be ordered bracket as Service Kit #WR49X10193. Wall toggles installation are installed in the drywall and metal studs Metal Channel (cont.) for stability. Install the wall toggles as follows: • Drill 1/2" holes at the wall markings made Cap in the holes at the ends of the wall bracket. • Hold the metal channel flat against the plastic straps and
Resumen del contenido incluido en la página 18
Anti-Tip Bracket Installation 36” All-Refrigerator and All-Freezer Units Remove Grilles for Access to Power Cord Anti-tip and Anti-tip Locking Hooks bracket Fresh Food Unit installation • Open the access door. (cont.) • Using a 1/4" hex driver, remove the 2 screws at the bottom of the grille. • Pull the bottom of the grille forward, down and out to remove. Screws Freezer Unit • Open the access door. • Using a 1/4" hex driver, remove the 2 screws at the bottom of the grille on the right. • Pu
Resumen del contenido incluido en la página 19
Anti-Tip Bracket Installation 36” All-Refrigerator and All-Freezer Units All models have 4-point leveling. The front is Level unit supported by leveling legs; the rear is supported by adjustable wheels. Both are accessible from the front of the unit. Hex Nut Adjusts • To level the back of the unit, turn the 7/16" Rear Wheels hex nut located above the front wheels. Turn clockwise to raise or counterclockwise to lower the unit. Leveling Leg • For front leveling, use a 1-1/4" open-end wrench. • Ad
Resumen del contenido incluido en la página 20
Anti-Tip Bracket Installation 36” All-Refrigerator and All-Freezer Units • The “L” rods can be found in the upper left Secure unit and right corners of the unit in the access to wall compartment. Look through the access compartment to make sure the rods line up with the anti-tip bracket. • There are 2 washers and a hair pin cotter per rod. Remove the washers and hair pin cotter from the end of the rod. • Rotate and move the “L” rod into the slot in the anti-tip bracket tab. Once it is in th
