Resumen del contenido incluido en la página 1
Bottom Freezer
Refrigerator
Use & Care Guide
Important Safety Instructions . . . . . . . . . . . . . . . 1-2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Temperature Controls . . . . . . . . . . . . . . . . . . . . 10-11
Fresh Food Features . . . . . . . . . . . . . . . . . . . . . 12-14
Freezer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ice and Water . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Water Filter . .
Resumen del contenido incluido en la página 2
Important Safety Instructions DANGER Installer: Please leave this guide with this appliance. To reduce risk of injury or death, follow basic Consumer: Please read and keep this Use and precautions, including the following: Care Guide for future reference; it provides the proper use and maintenance information. Important: Child entrapment and suffocation are Keep sales receipt and/or canceled check as proof not problems of the past. Junked or abandoned of purchase. refrigerators are still dangero
Resumen del contenido incluido en la página 3
Important Safety Instructions WARNING To reduce risk of fire, electric shock, serious 13. Always disconnect refrigerator from electrical injury or death when using your refrigerator, supply before attempting any service. Disconnect follow basic precautions, including the following: power cord by grasping the plug, not the cord. 1. Read all instructions before using the refrigerator. 14. Install refrigerator according to Installation Instructions. All connections for water, electrical 2. Observe
Resumen del contenido incluido en la página 4
Installation Your refrigerator was packed carefully for shipment. Leveling Remove and discard shelf packaging and tape. Do not To enhance the appearance and maintain performance, remove the serial plate. the refrigerator should be leveled per instructions below. Location CAUTION • Do not install refrigerator near oven, radiator or other To protect property and refrigerator from heat source. If not possible, shield refrigerator with damage, observe the following: cabinet material (contact a quali
Resumen del contenido incluido en la página 5
Installation Door and Drawer Removal Pullout Freezer Drawer Some installations require door/drawer removal to DANGER transport the refrigerator to its final location. To prevent accidental child entrapment or WARNING suffocation risk, do not remove the divider in the top freezer basket. To avoid electrical shock which can cause severe personal injury or death, observe the WARNING following: To avoid electrical shock, which can cause severe • Disconnect power to refrigerator before removing perso
Resumen del contenido incluido en la página 6
Installation To Install: Reinstallation of the Doors 1. Pull both rails out to full 1. Install hinge assemblies: extension. 5 • Install top hinge loosely with ⁄16” hex head screws. • Install center hinge with Phillips screws. • Freezer door models: Install bottom hinge with 2. While supporting door front, 3 ⁄8” hex head screws. hook supports into tabs located on inside of rail. 2. Freezer door models: Insert bottom hinge pin. • Locate bottom hinge hole closest to outside edge of cabinet, and ins
Resumen del contenido incluido en la página 7
Installation 3. Locate handle trim in literature pack and CAUTION install over top and bottom of handle, as To avoid possible injury and damage to property: illustrated. • Place doors on a nonabrasive surface protected by • Secure top handle trim with remaining towels or rugs while working directly on doors. screw removed in step 1. • Snap bottom trim over bottom portion 3. Transfer door stops from bottom edge of fresh food of handle. door and freezer door, if applicable, to opposite side of doo
Resumen del contenido incluido en la página 8
Installation To Install: Freezer Handles Handle Door Stud 1. Align door handle Partial-Width Handle Clip Handle clips to the studs Materials Needed: Base attached to the freezer door. • Phillips screwdriver 2. Ensure the large To Install: hole in the 1. Install handle by fastening with mounting clip is screws removed from edge of door. positioned to the right on both ends • If reversing freezer door, remove of the handle. door plugs from top edge of door 3. Rotate the handle so that the handle i
Resumen del contenido incluido en la página 9
Installation Materials Needed: Connecting the Water Supply 1 • ⁄4” outer diameter flexible copper tubing 1 WARNING • Shut-off valve (requires a ⁄4” hole to be drilled into water supply line before valve attachment) To reduce the risk of injury or death, follow • Adjustable wrench (2) basic precautions, including the following: 1 • ⁄4” hex nut driver • Read all instructions before installing ice maker. • Do not attempt installation if instructions are not Notes: understood or if they are beyond
Resumen del contenido incluido en la página 10
Installation 2. Remove plastic cap from water 5. Slide brass nut over sleeve and valve inlet port. screw nut into inlet port. Place adjustable wrench on nut 3. Place brass nut (A) and sleeve (B) 1 (1) attached to plastic waterline on copper tube end as illustrated. 2 Reminder: Do not use old sleeve. and maintain position. The nut and the sleeve are Using second adjustable wrench provided in the use and care turn the lower nut (2) packet. A counterclockwise and fully tighten B while holding the
Resumen del contenido incluido en la página 11
Temperature Controls Adjusting the Controls Dial Temperature Controls (select models) • 24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If The controls are located at the top front of the so, adjust the control(s) as indicated in the refrigerator and freezer compartments. Temperature Control Guide table below. See page 20 for instructions on checking compartment Note: The freezer control turns the cooling system temperature. on. Neither sectio
Resumen del contenido incluido en la página 12
Temperature Controls Adjusting the Controls Touch Temperature Controls (select models) • 24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If The controls are located at the top front of the so, adjust the control(s) as indicated in the refrigerator compartment. Temperature Control Guide table below. See page 20 for instructions on checking compartment Control temperature. • Except when starting the refrigerator, do not change either control mor
Resumen del contenido incluido en la página 13
Fresh Food Features Shelves Door Storage CAUTION Dairy Center To avoid personal injury or property damage, The Dairy Center provides observe the following: convenient door storage for spreadable items such as butter • Never attempt to adjust a shelf that is loaded with and margarine. This compartment can be moved to food. different locations to accommodate storage needs. To • Confirm shelf is secure before placing items on use the dairy center, raise the cover. shelf. To Remove: • Handle tempere
Resumen del contenido incluido en la página 14
Fresh Food Features Beverage Chiller™ Storage Drawers (select models) Snack Drawer (select models) The Beverage Chiller™ keeps The Snack Drawer can be used for beverages and other items cooler storage of miscellaneous items or than the rest of the fresh food extra produce. section. A cold air inlet allows air from the freezer section to pass into the beverage chiller. To Remove: The Beverage Chiller™ control is located • Pull drawer out to full extension. Tilt up front on the left wall of the f
Resumen del contenido incluido en la página 15
Fresh Food Features Temperature-Controlled Drawer Beverage Organizer™ (select models) (select models) The Beverage Organizer™ slides out from underneath the Spillsaver™ shelf. The Beverage Organizer™ holds The Chef’s Pantry™ drawer is a full-width drawer with up to twelve 12-ounce beverage cans. adjustable temperature control. This drawer can be used for large party trays, deli items, beverages or To Remove: miscellaneous items. • Pull out to full extension. Tilt up the front of the There is a t
Resumen del contenido incluido en la página 16
Freezer Features Upper Wire Basket Shelves and Baskets Models with swing freezer door: To Remove: • Pull upper basket out to full extension and lift out to Freezer Shelf (select models) remove. Select models have a shelf divider. To Install: To Remove: • Slide upper basket into freezer. Make sure that rear of basket hooks behind rail catch. • Pull shelf out to full extension. Tilt up front of shelf and pull straight out. To Install: • Insert shelf into freezer liner rails and push to back of com
Resumen del contenido incluido en la página 17
Ice and Water cubes will rattle as they fall into an empty storage bin Automatic Ice Maker and the water valve may click or “buzz” occasionally. (select models) • If the ice is not used frequently, the ice cubes will become cloudy, shrink, stick together and taste stale. Note: Energy rating guides that are posted on the Empty the ice storage bin periodically and wash it in refrigerator at the time of purchase do not include lukewarm water. Be sure to dry the bin thoroughly optional ice maker ene
Resumen del contenido incluido en la página 18
Ice and Water To Dispense Water: Water Dispenser (select models) • Hold container under spout and The Water Dispenser is located on the left side wall of press dispenser pad. the fresh food section. This design is for cold water dispensing only. Water Filter (select models) Removal and Installation 3. Rotate gently clockwise until filter stops. Snap filter cover WARNING closed. To avoid serious illness or death, do not use 4. Reduce water spurts by flushing refrigerator where water is unsafe or
Resumen del contenido incluido en la página 19
Water Filter (select models) System Specification and Performance Data Sheet TM Refrigerator Water Filter Cartridge Model UKF8001AXX Specifications Service Flow Rate (Maximum).............................................0.78 GPM (2.9 L/min) Rated Service Life UKF8001AXX-750 (Maximum)......750 gallons/2838 liters Maximum Operating Temperature .....................................100° F / 38° C 1000 Apollo Road Minimum Pressure Requirement........................................35 psi /241 kPA
Resumen del contenido incluido en la página 20
Water Filter (select models) State of California Department of Health Services Water Treatment Device Certificate Number 03 - 1583 Date Issued: September 16, 2003 Trademark /Model Designation Replacement Elements ® PuriClean II UKF8001AXX750 UKF8001AXX Manufacturer: PentaPure Inc. The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section 116830 of the Health and Safety Code for the following health related contaminants: Microbiological Contami
