Manual de instrucciones de Stanton DIGIPAK SINGLE TOP LOADINGPROFESSIONAL PREAMP MIXER

Resumen del contenido incluido en la página 1

DIG I P A K
SINGLE TOP LOADING CD PLAYER PROFESSIONAL PREAMP MIXER
O W N E R 'S MA N U A L
S TAN T O N MAG N E T IC S , IN C
information@stantondj.com (954) 689-8833
www .stan t ondj .c om

Resumen del contenido incluido en la página 2

IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating 15. Object and Liquid Entry Care should be taken so that instructions should be read before this product is objects do not fall and liquids are not spilled into the operated. enclosure through openings. 2. Retain Instructions The safety and operating 16. Damage Requiring Service The appliance should be instructions should be retained for future reference. serviced by qualified service personnel when:

Resumen del contenido incluido en la página 3

IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove CAUTION any cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamatio

Resumen del contenido incluido en la página 4

S-250 FUNCTIONS 1 14 ELAPSED REMAIN 2 SINGLE CONTINU 13 3 12 11 4 10 5 6 7 8 9 21 15 16 17 18 19 20

Resumen del contenido incluido en la página 5

S-250 FUNCTIONS 1) EJECT: Opens the CD door 18) VOLTAGE SELECTOR: Used to select the unit’s voltage according to the local setting. Note: The voltage should 2) STOP: Stops the CD. preset correctly from the factory, however, make sure to check it before powering the unit. 3) SKIP: Skips through the tracks on the CD, forward or *Just for Dual Voltage only. back. 19) AC IN: This is the connection for the supplied power 4) : Scans forward or back through the current track. cable.

Resumen del contenido incluido en la página 6

SMX-211 FEATURES Compact design User replaceable crossfader 2 phono, 2 line, 1 microphone input Gain, Treble, and Bass Controls on Channels Powerful stereo headphone output Cue Pan Selector (Ch.1-Ch.2) Bright LED Output Indicators Selectable Fader Start (Ch.1-CH.2) SMX-211 MIXER FEATURES 6 4 11 10 9 3 2 1 5 7 8 MIC

Resumen del contenido incluido en la página 7

SMX-211 MIXER FEATURES TOP & FRONT PANEL 1. Input fader - Controls individual source levels (channels) Note: The crossfader is user replaceable in case of in the mix. failure. Simply unscrew the two large screws which hold 2. Input toggle switch - Selects which source will be active it in place, lift it out and disconnect itís cable. Re-attach based on what you have connected to the rear panel the new crossfader and screw the mounting plate back input section (phono/line). onto the uni

Resumen del contenido incluido en la página 8

QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mi

Resumen del contenido incluido en la página 9

CONNECT THE POWER SETUP DIAGRAM AC IN~ FADER START AUDIO OUT OUTPUT FADER AC IN~ START AUDIO OUT ELAPSED ELAPSED REMAIN REMAIN SINGLE SINGLE CONTINU CONTINU S-250 SMX-211 S-250 1.AC IN~ 4.LINE 1 10.AC IN~ 2.FADER START 5.LINE 2 11.FADER START 3.AUDIO OUT 6.OUTPUT 12.AUDIO OUT 7.FADER START A 8.FADER START B 9.AC 9V (AC ADAPTOR) SPECIFICATION S-250 SMX-211 POWER SOURCE POWER SOURCE AC 9V Dual Voltage: DIMENSIONS 228 (W) X 265 (D) X 87 (H) mm AC 115/230V, 50/60Hz WEI

Resumen del contenido incluido en la página 10

Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement WARRANTY Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase.

Resumen del contenido incluido en la página 11

cut along dotted line STANTON WARRANTY REGISTRATION CARD If you have internet access, please register your product at www.stantondj.com. Otherwise, return this card completely filled out in order to validate your warranty. PERSONAL INFO Name Address City State Zip Country Telephone PRODUCT INFO Model Number Serial Number Date of Purchase Where did you buy this product?

Resumen del contenido incluido en la página 12

PLACE STAMP HERE Stanton Magnetics, Inc. 3000 SW 42nd Street Hollywood, FL 33312 U.S.A.