Resumen del contenido incluido en la página 1
MODEL G0739
OSCILLATING SPINDLE SANDER
OWNER'S MANuAL
(For models manufactured since 2/12)
Copyright © FEB r UAry , 2012 By g rizzly ind Ustri Al, in C.
WARNING: NO PORTION Of ThIS MANuAL MAy b E REPRODuCED IN ANy ShAPE
OR fORM WIThOuT ThE WRITTEN APPROvAL Of G RIzz Ly INDuSTRIAL, INC.
#st Bl 14792 print Ed in Chin A
Resumen del contenido incluido en la página 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to
Resumen del contenido incluido en la página 3
Table of Contents INTRODuCTION ............................................... 2 SECTION 4: OPERATIONS ........................... 16 Manual Accuracy ........................................... 2 disabling switch........................................... 16 Contact info.................................................... 2 sanding drum/sleeve installation ................ 17 identification ................................................... 3 sanding ............................................
Resumen del contenido incluido en la página 4
INTRODuCTION Manual Accuracy Contact Info We are proud to offer this manual with your new We stand behind our machines. If you have machine! We've made every effort to be exact any questions or need help, use the information with the instructions, specifications, drawings, below to contact us. Before contacting, please get and photographs of the machine we used when the serial number and manufacture date of your writing this manual. However, sometimes we still machine. This will help us hel
Resumen del contenido incluido en la página 5
Identification spindle spindle hex nut table insert spindle Washer drum and sanding sleeve table sander Body dust port drums and sanding sleeves power Cord table inserts spindle Washers (not shown) on/oFF paddle switch w/disabling Key figure 1. Machine identification. for your Own Safety Read This Manual before Operating Spindle Sander a) Wear eye protection. b) Support workpiece on worktable. c) Minimize pinch hazards. use the smallest table insert possible with sanding drum. d) Avoid kickbac
Resumen del contenido incluido en la página 6
MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0739 OSCILLATING SPINDLE SANDER Product Dimensions: Weight............................................................................................................................................................... 30 lbs. Width (side-to-side) x Depth (front-to-back) x Height.................................................. 15-9/16 in. x 14-1/8 in. x 17 in. Footprint (Length x
Resumen del contenido incluido en la página 7
SECTION 1: SAf ETy For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indic
Resumen del contenido incluido en la página 8
DISCONNECTING POWER SUPPLY. Always dis- GUARDS & COVERS. Guards and covers can connect machine from power supply before ser- protect you from accidental contact with moving vicing, adjusting, or changing cutting tools (bits, parts or flying debris. Make sure they are prop- blades, cutters, etc.). Make sure switch is in OFF erly installed, undamaged, and working correctly position before reconnecting to avoid an unexpect- before using
Resumen del contenido incluido en la página 9
Additional Safety for Spindle Sanders fEED RATE. never jam a workpiece against the DuST COLLECTION. never operate the sander sanding surface. this can cause the workpiece to without an adequate dust collection system in kick back or damage the machine. Firmly hold the place and running. proper dust collection reduces workpiece and ease it against the spindle using dust in the work area, which decreases the risk of light pressure. long-term respiratory damage. AvOIDING ENTANGLEMENT. Keep loos
Resumen del contenido incluido en la página 10
SECTION 2: POWER SuPPLy Availability Circuit Requirements Before installing the machine, consider the avail- This machine is prewired to operate on a 120V ability and proximity of the required power supply power supply circuit that has a verified ground and circuit. If an existing circuit does not meet the meets the following requirements: requirements for this machine, a new circuit must be installed. To minimize the risk of electrocu- Nominal voltage ........................................
Resumen del contenido incluido en la página 11
Extension Cords Polarized Plug We do not recommend using an extension cord to reduce the risk of electric shock, this machine with this machine. If you must use an extension has a polarized plug (one blade is wider than the cord, only use it if absolutely necessary and only other). this plug will fit in a polarized outlet only on a temporary basis. one way. if the plug does not fit fully in the outlet, turn it 180 degrees and try again. if it still does not fit, contact a qualified elect
Resumen del contenido incluido en la página 12
SECTION 3: SETuP unpacking This machine presents serious injury hazards Your machine was carefully packaged for safe to untrained users. Read transportation. Remove the packaging materials through this entire manu- from around your machine and inspect it. If you al to become familiar with discover any damage, please call us immediately the controls and opera- at (570) 546-9663 for advice. tions before starting the machine! Save the containers and all packing materials for possible ins
Resumen del contenido incluido en la página 13
Inventory Cleanup Gasoline or products with low flash points can The following is a description of the main compo- The unpainted surfaces of your machine are explode or cause fire if nents shipped with your machine. Lay the compo- coated with a heavy-duty rust preventative that used to clean machin- nents out to inventory them. prevents corrosion during shipment and storage. ery. Avoid cleaning with This rust preventative works extremely well, but it these products. If any non-proprietar
Resumen del contenido incluido en la página 14
Site Considerations Weight Load Physical Environment Refer to the Machine Data Sheet for the weight The physical environment where the machine is of your machine. Make sure that the surface upon operated is important for safe operation and lon- which the machine is placed will bear the weight gevity of machine components. For best results, of the machine, additional equipment that may be operate this machine in a dry environment that is installed on the machine, and the heaviest work- free fr
Resumen del contenido incluido en la página 15
Mounting Assembly The base of this machine has mounting holes place the spindle hex nut, table inserts, sand- that allow it to be fastened to a workbench or ing drums and sleeves, and spindle washers in other mounting surface to prevent it from moving the appropriate sized accessory slots beneath during operation and causing accidental injury or the table. A sanding drum does not need to be damage. installed until after the test run. The strongest mounting option is a "Through Mount" (see ex
Resumen del contenido incluido en la página 16
Dust Collection Power Connection After you have completed all previous setup instructions and circuit requirements, the machine is ready to be connected to the power supply. DO NOT operate the Model G0739 without an adequate dust collection system. This sand- To avoid unexpected startups or property dam- er creates substantial amounts of wood dust age, use the following steps whenever connecting while operating. f ailure to use a dust collec- or disconnecting the machine. tion system can re
Resumen del contenido incluido en la página 17
The switch can be disabled by removing the key, as shown below. Disabling the switch in this man- ner can prevent unauthorized operation of the machine, which is important if it is not kept inside an access-restricted building or in a location where children may be present. IMPORTANT: Disabling the switch only restricts its function. It is not a substitute for disconnecting machine from power when 6. remove the switch disabling key, as shown Test Run adjusting or servicing. in figure 11.
Resumen del contenido incluido en la página 18
SECTION 4: OPERATIONS Disabling Switch To reduce the risk of serious injury when using t he switch can be disabled by removing the key, The switch can be disabled by removing the key, this machine, read and as shown in the following figure. d isabling the as shown below. Disabling the switch in this man- understand this entire switch in this manner can prevent unauthorized ner can prevent unauthorized operation of the manual before operating. operation of the machine, which is important
Resumen del contenido incluido en la página 19
4. Clean the table opening for the table insert Sanding Drum/ and any other spindle areas as necessary. there should be no sawdust on the ledge of Sleeve Installation the table opening where the table insert is placed or the table insert will not sit flush with t o ensure the workpiece is supported during sand- the table. ing operations, use the table insert that matches the corresponding drum and sleeve (see table 5. Use the table on this page to select the below). it is important to kee
Resumen del contenido incluido en la página 20
ACCEssoriEs SECTION 5: ACCESSORIES Replacement Sanding Sleeve 3 Packs 1 1 h5434— ⁄2" Dia. x 4 ⁄2", hard A150 3 1 h5438— ⁄4" Dia. x 4 ⁄2", hard A120 Some aftermarket accessories can be 1 h5442—1" Dia. x 4 ⁄2", hard A100 installed on this machine that could cause 1 1 h5447—1 ⁄2" Dia. x 4 ⁄2", hard A100 it to function improperly, increasing the risk 1 h5451—2" Dia. x 4 ⁄2", hard A80 of serious personal injury. To minimize this 1 h5455—3" Dia. x 4 ⁄2", hard A60 risk, only install accessories rec
