Manual de instrucciones de ATD Tools ATD-6900

Resumen del contenido incluido en la página 1

ATD-6900
9PCS HVLP SPRAY GUN SET
INSTRUCTION MANUAL
Read this manual carefully and understand it completely.
Retain manual for future use.
Always follow safety precautions to prevent personal injury and/or damage
to the equipment.
Illustrations and photos are intended for reference only. Actual product may vary.
Specifications are subject to change without notice.
Important Safety Instructions
1. Always wear eye protection, gloves and respirator to prevent against harmful
vapors whi

Resumen del contenido incluido en la página 2

Operating Instructions POWER SOURCE This tool operates best on a clean, dry supply of compressed air delivered at 29 to 50 psi. Use of a moisture trapping air filter (ATD-7812) is highly recommended as moisture or foreign matter can damage the internal parts of this tool. CAUTION: All air pressure in the system should be rated at 29 to 50 psi. Higher or lower pressure can adversely influence the operation or cause damage to this tool. NOTE: To maintain a maximum 10 PSI at the nozzle

Resumen del contenido incluido en la página 3

Figure 3 – INCORRECT Figure 4 – CORRECT 3

Resumen del contenido incluido en la página 4

ADJUSTMENT 1. Fine-tune the gun to your desired working settings of spray patterns, fluid output and degree of paint atomization using the three controls illustrated in Figure 5. Figure 5 Maintenance To clean the gun, pour any leftover paint back into its container. Using thinner, clean out the paint cup and cap. Spray some thinner through the gun to clean the spray head, needle and nozzle. Spray until thinner comes out clean. Clean all paint passages as any paint left in the gun and allo

Resumen del contenido incluido en la página 5

5

Resumen del contenido incluido en la página 6

6

Resumen del contenido incluido en la página 7

7

Resumen del contenido incluido en la página 8

8