Resumen del contenido incluido en la página 1
S8™ Auto 25
Positive Airw Ay Pressure device
User Guide
English
Resumen del contenido incluido en la página 2
S8™ Auto 25 POSITIVE AIRWAY PRESSURE DEVICE User Guide English ResMed Ltd (Manufacturer) 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia ResMed Corp (US Designated Agent) 14040 Danielson Street Poway CA 92064-6857 USA ResMed (UK) Ltd (EU Authorised Representative) 96 Milton Park Abingdon Oxfordshire OX14 4RY UK ResMed Offices Australia, Austria, Belgium, Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland, Italy, Japan, Malaysia, Mexico, Netherlands, New
Resumen del contenido incluido en la página 3
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contraindications 1 Adverse Effects 1 The S8 Auto 25 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Masks 2 Humidifier 2 ResScan Data Card 2 Using the S8 Auto 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting up your S8 3 Attaching a H4i Humidifier 4 How to Use the Control Panel 4 Using the Menu
Resumen del contenido incluido en la página 4
Introduction TM The S8 Auto 25 self adjusting sleep apnoea system is indicated for the treatment of obstructive sleep apnoea (OSA) in patients > 30 kg. The S8 Auto 25 is intended for home and hospital use. Contraindications The S8 Auto 25 is not a life support device and may stop operating during power failure or certain fault conditions. It should not be used by patients who are dependent on continuous therapy. Positive airway pressure therapy may be contraindicated in some patients with the
Resumen del contenido incluido en la página 5
Carry handle Data Card module Screen Keypad Air inlet DC Air outlet AC Masks The following ResMed mask systems are recommended for use with this device: Mask Type Name Nasal Masks • Mirage Vista™ Nasal Mask • Ultra Mirage™ Nasal Mask • Ultra Mirage™ II Nasal Mask • Mirage Activa™ Nasal Mask • Mirage Micro™ Nasal Mask Nasal Pillows Systems • Mirage Swift™ Nasal Pillows System • Mirage Swift™ II Nasal Pillows System • Swift™ LT Nasal Pillows System Full Face Masks • Mirage™ Liberty Full Face Mask
Resumen del contenido incluido en la página 6
Using the S8 Auto 25 Setting up your S8 1 Connect the power cord to the socket at the rear of your S8 Auto 25. 2 Plug the other end of the power cord into the power outlet. 3 Connect one end of the air tubing firmly onto the air outlet. 4 Connect the assembled mask system to the free end of air tubing. For information on assembling your mask, see your mask manual. 2 1 3 4 WARNING ! • Make sure the power cord and plug are in good condition and the equipment is not damaged. • Only ResMed air tub
Resumen del contenido incluido en la página 7
Attaching a H4i Humidifier The H4i humidifier attaches to the front of the S8 Auto 25 device to provide heated humidification. This device automatically detects the presence of the H4i and no other accessories are required for its use. For more information on using your H4i, please refer to the H4i user guide. WARNING ! • Make sure that the water chamber is empty and thoroughly dried before transporting the H4i. • When using the travel bag, always separate the S8 unit and the H4i and place
Resumen del contenido incluido en la página 8
Using the Menus The S8 Auto 25 provides a set of functions which are arranged in menus and submenus. Via the LCD screen, the menus and submenus allow you to view and change the settings for a particular function. To navigate and make selections: 1 Press or to scroll through items within a level. 2 Press to enter a submenu and to apply an option choice. 3 Press to navigate out of a menu or submenu and to exit without changing options. Your clinician has preset the menu to either a standard
Resumen del contenido incluido en la página 9
How to Select the Mask Type Scroll to MASK and select . Press or until you see the setting you require. The following table shows the setting that should be selected for each mask: Settings Mask ULTRA Ultra Mirage Nasal Mask Ultra Mirage II Nasal Mask MIR FULL Mirage Liberty Full Face Mask Mirage Quattro Full Face Mask Ultra Mirage Full Face Mask ACTIVA Mirage Activa Nasal Mask SWIFT Mirage Swift Nasal Pillows System Mirage Swift II Nasal Pillows System Swift LT Nasal Pillows System STANDARD
Resumen del contenido incluido en la página 10
Starting Treatment 1 Make sure the power is on. The product name is displayed briefly on the LCD screen, then the standby (Ramp) screen appears. The key and LCD backlights also turn on. 2 Fit your mask as described in the mask user instructions. WARNING ! A mask should not be used unless your S8 Auto 25 is turned on and operating properly. 3 Alter the ramp time if required. 4 To start therapy, simply breathe into the mask or press . 5 Lie down and arrange the air tubing so that it is free t
Resumen del contenido incluido en la página 11
The LCD displays a mask-fit star rating from zero to five stars. Three to five stars indicates a good fit or better. Zero to two stars indicates that the mask needs to be adjusted. Reminders on the S8 LCD Your clinician may have set your S8 Auto 25 to remind you about important events, such as when to replace your mask, when to insert your Data Card and so on. The reminder message is displayed on the LCD and is visible if the device is not delivering therapy. The backlight on the LCD flashes
Resumen del contenido incluido en la página 12
Using the Data Card If your clinician needs to review your treatment, they will ask you to use the Data Card to copy data from your S8 device and return the card to them. Copying Data onto a Data Card 1 Switch on your S8 and wait until you see the standby (Ramp) screen. 2 Hold the Data Card with the arrow facing up and insert it into the Data Card slot until it stops. Data copying starts automatically. The “Card Inserted Please Wait” message is displayed on the LCD while data is being copied.
Resumen del contenido incluido en la página 13
Traveling with the S8 Auto 25 International Use Your S8 flow generator has an internal power adapter that enables it to operate in other countries. It will operate on power supplies of 100–240V and 50–60Hz. No special adjustment is necessary, but you will require an approved power cord for that country. Use on an Aircraft Please consult the medical services department of your carrier if you intend to use your S8 device on an aircraft. Note: You should not use your S8 device while the aircr
Resumen del contenido incluido en la página 14
Cleaning and Maintenance You should regularly carry out the cleaning and maintenance described in this section. Refer to your mask and humidifier manuals for detailed instructions regarding the care of those devices. Daily Disconnect the air tubing and hang it in a clean, dry place until next use. Weekly 1 Remove the air tubing from the S8 device and the mask. 2 Wash the air tubing in warm water using mild detergent. 3 Rinse thoroughly, hang, and allow to dry. 4 Before the next use, reconnect
Resumen del contenido incluido en la página 15
WARNING ! • Do not wash the air filter. The air filter is not washable or reusable. • The air filter cover protects the device in the event of accidental liquid spillage onto the device. Ensure the air filter and air filter cover are fitted at all times. Servicing This product should be inspected by an authorised ResMed service centre five years from the date of manufacture. Prior to this, the device is intended to provide safe and reliable operation provided that it is operated and maintain
Resumen del contenido incluido en la página 16
Troubleshooting If there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do not attempt to open the device. Problem/Possible Cause Solution No display Power is not connected. Ensure the power cable is connected and the power switch (if available) is on. Insufficient air delivered from the S8 device Ramp time is in use. Wait for air pressure to build up or change ramp time. Air filter is dirty. Replace air filter. Air tub
Resumen del contenido incluido en la página 17
Problem/Possible Cause Solution Displays error message: Exxxx Call Service (where xxxx defines an error) Component failure. Record error number and contact your ResMed service centre. Displays error message: HIGH LEAK!!! Adjust Mask You have experienced excessively Check that your air tubing is connected properly. high leak levels for more than 20 Adjust headgear. seconds. The following message is displayed on the LCD after you try to update settings or copy data to the Data Card: Card Error R
Resumen del contenido incluido en la página 18
Technical Specifications Operating pressure range 4 to 25 cm H O 2 Maximum single fault steady 40 cm H O 2 state pressure Pressure measurement ±0.5 cm H O ± 4% of the measured reading 2 tolerance Flow measurement tolerance ±0.1 or 20% of reading, whichever is greater VAuto mode 4 to 25 cm H O (measured at the mask); Min EPAP: 4 cm H O; 2 2 Pressure Support: 0 to 10 cm H O 2 CPAP mode 4 to 20 cm H O (measured at the mask) 2 DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871:
Resumen del contenido incluido en la página 19
Symbols Which Appear On The Device Caution; Follow instructions for use; Drip proof; Type CF equipment; Dangerous voltage; Class II equipment; Start/Stop and mask-fit; Manufacturer; Environmental information WEEE 2002/96/EC is a European Directive that requires the proper disposal of electrical and electronic equipment. This device should be disposed of separately, not as unsorted municipal waste. To dispose of your device, you should use appropriate collection, reuse and recycling
Resumen del contenido incluido en la página 20
Note: At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration varies, depending on the pressure settings, patient breathing pattern, mask, point of application and leak rate. • Do not use the S8 Auto 25 if there are obvious external defects or unexplained changes in performance. • Do not open the S8 case. There are no user serviceable parts inside. Repairs and internal servicing should only be performed by an authorised service agent. • Explosion hazard—do not use in th
