Manual de instrucciones de Honeywell MAGICSTAT CT3200

Manual de instrucciones del aparato Honeywell MAGICSTAT CT3200

Aparato: Honeywell MAGICSTAT CT3200
Categoría: Termostato
Fabricante: Honeywell
Tamaño: 0.46 MB
Fecha de añadido: 8/9/2013
Número de páginas: 24
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Honeywell MAGICSTAT CT3200. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Honeywell MAGICSTAT CT3200.

Para tu comodidad

Si ver los manuales de instrucción de Honeywell MAGICSTAT CT3200 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Honeywell MAGICSTAT CT3200 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Honeywell MAGICSTAT CT3200 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Honeywell MAGICSTAT CT3200 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Honeywell MAGICSTAT CT3200, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Honeywell MAGICSTAT CT3200. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

®
MagicStat CT3200 Programmable Thermostat
Installation and Programming Instructions
Weekday/Weekend (5-day/2-day)
Programmable Heat and/or Cool
Low Voltage (20 to 30 Vac)
Thermostat and Mounting Plate
Model CT3200
Table of Contents
Installation 2
Programming 11
Operation 17
Change the clock for Daylight/ 17
Welcome to the world of comfort and energy savings
Standard Time
with your new Honeywell MagicStat® Programmable
Thermostat. Your new thermostat will automatically
Set the Fan and System

Resumen del contenido incluido en la página 2

Fig. 1 Recycling Thermostat MERCURY If you are removing an old thermostat that contains mercury in a SWITCH sealed tube (Fig. 1), do not place the old thermostat in the trash. Contact your local waste management authority for instructions regarding recycling and the proper disposal of the old thermostat. M3701 Installation Verify that you have the right thermostat Make sure that the CT3200 is the right thermostat for your heating/cooling system. Read the compatibility chart below to determ

Resumen del contenido incluido en la página 3

Step 1. Prepare for installation a. Carefully unpack your new thermostat. Save your receipt and make sure you have the following parts:  Thermostat and mounting plate  Screws and anchors  Labels  Installation and Programming Instructions b. Gather the needed tools and supplies listed below. Required tools and supplies Optional tools  Two AA alkaline batteries. Honeywell recommends Energizer®  Wire cutter/stripper or sharp knife batteries.  Level  Screwdriver  Electrical tape  Hand or

Resumen del contenido incluido en la página 4

Step 2. Remove the old thermostat Fig. 2 a. Turn off power to the heating/cooling system, either at the furnace or at the fuse/circuit breaker panel. b. Remove the cover of your old thermostat (Fig. 2). c. Unscrew and remove the old thermostat’s mounting plate from the wall, but do not disconnect the wires. d. Inspect the old thermostat wiring. If the wiring meets any of the following conditions, see the special wiring M20140 instructions on page 9.  The old thermostat is a clock thermo

Resumen del contenido incluido en la página 5

Rc G R W Step 3. Install the mounting plate Fig. 5 a. Separate the mounting plate from the thermostat using a coin, as shown in Fig 5. b. Position the mounting plate on the wall. Be sure the mounting plate sits flush against the wall and none of the wires are trapped behind it. c. Level the mounting plate and use a pencil to mark the center of the mounting plate’s screw holes. M20139 d. Remove the mounting plate and drill holes at the locations you marked.  For drywall, drill two 3/16 inc

Resumen del contenido incluido en la página 6

Step 4. Set the thermostat for your type of heating system Fig. 8 IMPORTANT: Setting your thermostat correctly for your type of THERMOSTAT BACK heating system allows it to maintain accurate temperature control, HEATING SELECTING ºF OR ºC SYSTEM TYPE minimize swings in the temperature of the room, and efficiently run the fan. A C DISPLAY F C–IN ADJUST SCREWS THROUGH HOLES TO SELECT OPERATION DESIRED DISPLAY C C–OUT a. Use the FUEL SWITCH on the back of the thermostat to set

Resumen del contenido incluido en la página 7

R W Heating System Table : Setting the screw “out one turn” means turning the screw 360° counter-clockwise, or one complete turn. Note Type of system Screws A and B Fuel switch Warm air, gas, or oil heating system with an efficiency rating under 90%. Use factory setting F (The furnace efficiency rating should be on the furnace.) A–leave in B–leave in High-efficiency furnace such as a 90% or greater AFUE (Average Fuel A–out one turn F Utilization Efficiency) unit B–leave in Hot water boiler A–o

Resumen del contenido incluido en la página 8

Step 6. Mount the thermostat Fig. 11 Fig. 12 a. Align the tabs at the top of the thermostat with the tabs at the top of the mounting plate (Fig. 11). b. Press the lower edge of the case to latch the bottom of the thermostat (Fig. 12). M20131 M20130 Step 7. Install the batteries IMPORTANT: Batteries must be installed for programming and Fig. 13 operation of the thermostat and heating/cooling system. Honeywell recommends using Energizer® batteries. a. Make sure that the System switch is s

Resumen del contenido incluido en la página 9

Special wiring instructions A clock thermostat with C or C1 terminals A clock thermostat has one or two extra wires attached to the C or C1 terminals that allow the clock to operate. These wires are not used during the installation of your new 3200 thermostat and must be insulated from each other to avoid damaging your electrical circuit. a. Make sure that power to the heating/cooling system is . turned off b. Locate the wires that are connected to the clock terminals marked C or C1. c. As

Resumen del contenido incluido en la página 10

WY G R R c Five wires connected to the old thermostat Your new thermostat has a factory-installed metal jumper between the R and Rc terminals (Fig. 15). Remove the jumper before wiring the R and Rc terminals. JUMPER (FACTORY- Fig. 15 INSTALLED). REMOVE IF 5-WIRE SYSTEM M20127 Old thermostat terminals that do not match new thermostat terminals Use the table below to wire the new thermostat. Old thermostat Connect to new Description terminal thermostat terminal R, RH, 4, V R* Power Rc, R Rc* P

Resumen del contenido incluido en la página 11

Programming Faceplate illustration and descriptions Descriptions Fig. 16 7 8 1Fan switch–Selects automatic fan operation or fan on (page 17) 6 9 AM SET PM 2 Set Schedule–Puts the thermostat into programming SYSTEM ON 5 10 MO TU WE TH FR SA SU TEMPORARY mode (page 14) WAKE LEAVE RETURN SLEEP 4 11 3 Set Clock/Day–Sets the clock and day (page 12) Time Temp 4 Time Ahead and Back–Sets the time ahead and Set Run 3 12 Ahead Ahead W Warmer armer back (page 12) clock/Day Program 5 Progra

Resumen del contenido incluido en la página 12

Step 1. Set the current time and day Fig. 17 a.Press once. The time is displayed (Fig. 17). b. Press and hold or until the current time is displayed. Fig. 18 c.Press again. The day is displayed (Fig. 18). d. Press and hold or until the current day is displayed. Fig. 19 e.Press once. The current time and day and the current temperature are displayed (Fig. 19). Step 2. Learn about the programming features Your 3200 thermostat allows you to program schedules for both a heating season an

Resumen del contenido incluido en la página 13

Program period Description When available The time when you get up and get ready to leave your home. Weekdays and weekend WAKE You can set the system at a comfortable temperature for this period. The time when you are regularly away from home. You can set Weekdays only LEAVE up an energy-saving temperature for this period. The time between returning home and going to bed. You can Weekdays only RETURN set the system at a comfortable temperature for this period. The time when you are sleeping.

Resumen del contenido incluido en la página 14

Step 3. Program the heating schedule a. Write in the times and temperatures that you want to program for your heating schedule. Heating Program WAKE LEAVE RETURN SLEEP Schedule period Suggested Time 6:00 AM 8:00 AM 6:00 PM 10:00 PM Settings Temp 70°F (21°C) 62°F (16.5°C) 70°F (21°C) 62°F (16.5°C) Weekday Time (Mon–Fri) Temp Weekend Time (Sat–Sun) Temp b. Set the System switch to HEAT. Fig. 20 c.Press once. A blank schedule is displayed (Fig. 20). d. Set the Monday–Friday WAKE time by pressing

Resumen del contenido incluido en la página 15

Fig. 23 g. Press until the weekend schedule is displayed (Fig. 23). h. Set the Saturday and Sunday WAKE time by pressing or until the desired time is displayed. i. Set the Saturday and Sunday WAKE temperature by Fig. 24 pressing or until the desired temperature is displayed (Fig. 24). j. Press again to display a blank schedule for the SLEEP program period and repeat steps h. through j. to set the program. k. Press to start the program. Step 4. Program the cooling schedule a. Write i

Resumen del contenido incluido en la página 16

b. Set the System switch to COOL. c. Repeat steps 3c. through 3k. to program the weekday and weekend cooling schedule. Step 5. Check out the system Verify that your heating system works a. Set the System switch to HEAT, and the Fan switch to AUTO. Fig. 25 b. Press until the setting is 10°F (6°C) above room temperature (Fig. 25). Your heating system should start and the fan should run after a short delay. c. Press until the setting is 10°F (6°C) below room temperature. Your heating system

Resumen del contenido incluido en la página 17

f. Press until the setting is 10°F (6°C) above room temperature. Your cooling system and fan should stop. g. Set the System switch to OFF and the Fan switch to AUTO. The cooling system and fan should be off. Operation Change the clock for Daylight/Standard time a.Press once. The time is displayed. b. Press and hold or until the correct time is displayed. c.Press once. The current time and day and the current temperature are displayed. Set the Fan and System switches The switches on the

Resumen del contenido incluido en la página 18

Switch Setting Result System Cool The thermostat controls your air conditioning system. Off Both the heating and air conditioning systems are off. Heat The thermostat controls your heating system. Replace the batteries As the batteries run low, your thermostat shows the following in the digital display: If you see: Batteries are: You should: Flashing “bAt Lo” Low Replace the batteries as soon as possible, within the month. Steady “bAt Lo” Almost dead Replace the batteries immediately. Your hea

Resumen del contenido incluido en la página 19

Override the program settings Note: Make sure the System switch is set to either HEAT or COOL before making any changes to the schedule. Change the temperature temporarily Fig. 27 Press or until the desired temperature is displayed. An arrow is displayed indicating that the change is temporary (Fig. 27). Note: A temporary change to the temperature lasts for the current program period only. The heating/cooling schedule that you programmed resumes when the next scheduled program period

Resumen del contenido incluido en la página 20

Check the current programmed temperature Fig. 29 Press to display the temperature that is programmed for the current program period. The SET indicator displays briefly along with the programmed temperature (Fig. 29). The display then returns to the room temperature. Check programs Press repeatedly to display the times and temperatures that you programmed. Press to resume the program. Cancel a program Fig. 30 a. Press until the desired program is displayed (Fig 30). Fig. 31 b.Press a


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Honeywell 191108AJ Manual de instrucciones Termostato 629
2 Honeywell 42011076-003 Manual de instrucciones Termostato 204
3 Honeywell 69-0786-2 Manual de instrucciones Termostato 57
4 Honeywell 69-1776EFS-01 Manual de instrucciones Termostato 56
5 Honeywell 72838 Manual de instrucciones Termostato 42
6 Honeywell 69-2485EFS-03 TH8320ZW1000 Manual de instrucciones Termostato 48
7 Honeywell 5-2-DAY DELUXE RTH6300B Manual de instrucciones Termostato 50
8 Honeywell 7300 Manual de instrucciones Termostato 20
9 Honeywell 69-1490 Manual de instrucciones Termostato 10
10 Honeywell 8000 Manual de instrucciones Termostato 90
11 Honeywell 8160 Manual de instrucciones Termostato 9
12 Honeywell 9820i Manual de instrucciones Termostato 8
13 Honeywell 8162 Manual de instrucciones Termostato 3
14 Honeywell 7351F Manual de instrucciones Termostato 30
15 Honeywell AC-220-7 Manual de instrucciones Termostato 3
16 Edelbrock 2116 Manual de instrucciones Termostato 0
17 A&D MF-50 Manual de instrucciones Termostato 8
18 A&D ML-50 Manual de instrucciones Termostato 8
19 A&D MS-70 Manual de instrucciones Termostato 15
20 Acu-Rite D1523 Manual de instrucciones Termostato 2