Manual de instrucciones de Homelite HHC35A

Manual de instrucciones del aparato Homelite HHC35A

Aparato: Homelite HHC35A
Categoría: Calentador eléctrico
Fabricante: Homelite
Tamaño: 0.5 MB
Fecha de añadido: 3/16/2014
Número de páginas: 40
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Homelite HHC35A. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Homelite HHC35A.

Para tu comodidad

Si ver los manuales de instrucción de Homelite HHC35A directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Homelite HHC35A en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Homelite HHC35A a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Homelite HHC35A Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Homelite HHC35A, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Homelite HHC35A. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

PART NO. 18127-C
Printed in U.S.A.
PORTABLE
SPACE HEATER
OWNER’S MANUAL
50 SIDE PFA/PV 010A
100 SIDE FRONT HANDLES PFA/PV 003
Models: HHC35A, HHC100A, and HHC150A
IMPORTANT
Read and understand this manual before assembling, starting, or servicing heater.
Improper use of heater can cause serious injury. Keep this manual for future reference.
NOTICE: For Servicing Dealer Information, see back page
CANADIAN ASSOCIATION GAS
APPROVED
R
This heater is certified by the Canadian Gas Association to Cana

Resumen del contenido incluido en la página 2

SECTION PAGE CONTENTS Safety Information ......................................................................... 3 Product Identification .................................................................... 4 Unpacking...................................................................................... 5 Assembly ....................................................................................... 5 35 Model .............................................................................

Resumen del contenido incluido en la página 3

IMPORTANT: Read this Owner’s Manual carefully and completely before trying SAFETY to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from fire, explosion, electrical shock, and carbon monoxide INFORMATION poisoning. Read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater. ! WARNINGS WARNING ICON G 001 • Use only kerosene or No. 1 fuel oil. • Use only with the electr

Resumen del contenido incluido en la página 4

PRODUCT Nose Cone Guard Hot Air Outlet IDENTIFICATION Upper Shell Handle Lower Shell Fan Guard Air Filter End Cover Fuel Tank Fuel Cap Side Cover Flame-Out Control Reset Button 35/70,000 BTU/HR CANADIAN PFA/PV 042A Power Cord Figure 1 - 35 Model Hot Air Upper Shell Outlet Lower Shell Fuel Cap Fan Guard Fuel Tank Side Cover Power Cord Flame-Out Control Reset Button Figure 2 - 100/150 Models 4 100577

Resumen del contenido incluido en la página 5

1. Remove all protective packaging that has been applied to heater for shipment UNPACKING 2. Remove heater from carton. 3. Check heater for any shipping damage. If damage is found, promptly inform dealer where heater was purchased. This model is furnished with a nose cone guard. Nose cone guard and ASSEMBLY mounting screws are found in the shipping carton. (For 35 Model Only) Tools Needed • 5/16" Nut Driver or Wrench 1. Place nose cone guard on top of upper shell flange. Make sure nose cone guar

Resumen del contenido incluido en la página 6

These models are furnished with wheels and a front handle. Wheels, front handle, ASSEMBLY and the mounting hardware is found in the shipping carton. (For 100 and 150 Models Only) Tools Needed • Medium Phillips Screwdriver • 3/8" Open or Adjustable Wrench • Hammer 1. Slide axle through wheel support frame. Install wheels on axle. IMPORTANT: Place extended hub of wheel toward wheel support frame. 2. Place cap nuts on axle ends. Gently tap with hammer to secure. 3. Place heater on wheel support fra

Resumen del contenido incluido en la página 7

The Fuel System: An air pump is located on one end of the motor shaft. The THEORY OF air pump forces air through the air line. The air is then pushed through the burner head nozzle. The moving air causes fuel to be lifted from the tank. The fuel and air OPERATION mixture is sprayed into the combustion chamber in a fine mist. The Air System: The motor turns a fan which pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air. The Ignition Sys

Resumen del contenido incluido en la página 8

FUELS ! WARNING Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, crankcase drainings, naphtha, paint thinners, alcohol, or other highly flammable fuels. Use only kerosene or No. 1 fuel oil. Do not use heavy fuels such as No. 2 fuel oil or No. 2 diesel. The use of heavy fuels will result in: • clogging of fuel filter and nozzle • carbon build up on spark plug • the need of non-toxic anti-icer in fuel during very cold weather Do not use No. 3 fuel o

Resumen del contenido incluido en la página 9

4. Plug heater’s power cord into approved, grounded, three-wire extension cord. Extension cord must be at least six feet (1.8 meters) long. Extension Cord Size Requirement 2 6 to 10 feet (1.8 to 3 meters) long, use 18 AWG (0.75 mm ) rated cord 2 11 to 100 feet (3.3 to 30.5 meters) long, use 16 AWG (1.0 mm ) rated cord 2 101 to 200 feet (30.8 to 61 meters) long, use 14 AWG (1.5 mm ) rated cord 5. Plug extension cord into standard 120 volt/60 hertz, 3-prong grounded outlet. Heater will start when

Resumen del contenido incluido en la página 10

Note: If shipping, transport companies require fuel tanks to be empty. STORING, 1. Drain fuel tank. Note: Some models have drain plug on underside of fuel tank. If so, remove TRANSPORTING, drain plug to drain all fuel. If heater does not have drain plug, drain fuel OR SHIPPING through fuel cap opening. Be sure all fuel is removed. 2. Replace drain plug if provided. 3. If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank, stir, and drain again. This will prevent excess

Resumen del contenido incluido en la página 11

TROUBLE- WARNING ! SHOOTING To avoid risk of burn and electrical shock, never attempt to service heater while it is plugged in, operating, or hot. OBSERVED FAULT POSSIBLE CAUSE REMEDY Incorrect pump pressure Heater ignites, but See Pump Pressure flame-out control Adjustment, page 13. shuts off heater after Dirty air output, air intake See Air Output, Air Intake a short period of and lint filters and Lint Filters, page 12. time. Dirty fuel filter See Fuel Filter, page 13. Dirt in nozzle See

Resumen del contenido incluido en la página 12

SERVICE WARNING ! PROCEDURES To avoid risk of burn and electrical shock, never attempt to service heater while it is plugged in, operating or hot. Upper Upper Shell Removal Shell 1. Remove screws along each side of Fan heater using 5/16" nut-driver. These Guard screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Figure 8 - Upper Shell Removal (35 Model Shown) Fan IMPORTANT: Remove fan from motor shaft before removing motor from heater. The weight of

Resumen del contenido incluido en la página 13

Pump Pressure (35 Model Shown) Adjustment 1. Remove pressure gauge plug from Relief Pressure filter end cover. Valve Gauge 2. Install accessory pressure gauge Plug (part number 00529-02). 3. Start heater (see Operation, page 8). Pressure Allow motor to reach full speed. Gauge Figure 13 - Pressure Gauge Plug Removal 4. Adjust pressure. Turn relief valve to Pump right to increase pressure. Turn Model Pressure relief valve to left to decrease 35 3 PSI pressure. See specifications at right 100 4 P

Resumen del contenido incluido en la página 14

Spark Plug Combustion Spark Plug Mounting Nut Chamber Burner (35 Model) Spark Strap 1. Remove upper shell (see page 12). Spark Plug Plug Cable 2. Remove fan (see page 12). 3. Remove fuel and air line hoses from nozzle assembly. 4. Remove spark plug cable from spark plug. 5. Remove two (2) screws using 5/16" nut-driver and remove burner strap. Nozzle Assembly 6. Place hex-body of spark plug into vise and tighten. Air Line Fuel Line Hose 7. Remove spark plug mounting nut Hose using 11/16" open-end

Resumen del contenido incluido en la página 15

Combustion Nozzle Chamber (35 Model) 1. Remove upper shell (see page 12). 2. Remove fan (see page 12). Nozzle 3. Remove fuel and air line hoses Assembly from nozzle assembly. Burner Nozzle 4. Turn nozzle assembly 1/4 turn to Strap Assembly left and pull toward motor to remove. 5. Place plastic hex-body into vise and lightly tighten. 6. Carefully remove nozzle from the Fuel Line Hose Air Line Hose nozzle adapter using 5/8" socket wrench. Figure 22 - Removing Air and Fuel Figure 23 - Removing Nozz

Resumen del contenido incluido en la página 16

12.Attach burner head to combustion Nozzle Nozzle Face chamber. Seal 13.Install spark plug in burner head. 14.Attach spark plug cable to spark plug. 15.Attach fuel and airline hoses to burner head. Nozzle 16.Replace fan (see page 12). 17.Replace fan guard and upper shell. Burner Head Fuel Line Air Line Fitting Fitting Figure 26 - Removing Nozzle, 100/150 Models Blade Pump Rotor Air Intake (Procedure if rotor is binding) Pump Filter 1. Remove upper shell (see page 12). Plate 2. Remove filter end

Resumen del contenido incluido en la página 17

13.Perform steps 1 through 6 Gap Adjusting Screw (see page 16). 14.Place fine grade sandpaper (600 grit) on flat surface. .003"/.004" (.076-.101 mm) Sand rotor lightly in “Figure Gap Measured With 8” motion four times (see Feeler Gauge Figure 30). 15.Reinstall insert and rotor. 16.Perform steps 10 through 12 (see page 16). Blade Rotor Gap Adjusting Screw Figure 29 - Gap Adjusting Screw Locations Sandpaper Figure 30 - Sanding Rotor Model Size 35 100 150 SPECIFICATIONS Output Rating (Btu/Hr) 35,00

Resumen del contenido incluido en la página 18

Power Plug WIRING 120V/60Hz DIAGRAMS White Black Green White White B White Flame- Green White Blue Blue Spark Plug Terminal Out Reset Ignitor Motor Board Control Button Photocell Red Red R Red Figure 31 - Wiring Diagram, 35 Model Power Plug 120V/60Hz White Black Green White White B White Flame- Green White Blue Blue Terminal Spark Plug Out Reset Ignitor Motor Board Button Control Photocell Red Red R Red Black Red Relay Figure 32 - Wiring Diagram, 100/150 Models 18 100577

Resumen del contenido incluido en la página 19

ACCESSORIES Heater accessories and parts are AIR GAUGE KIT available at your local dealer. For all models. Special tool to check pump pressure. Order part number 00529-02. THERMOSTAT KIT For all models. Keeps your building at the temperature you select day and night. Helps economize on fuel. Order part number 01145-58. THERMOSTAT A 011 HEAVY DUTY WHEELS AND HANDLE KIT For heavy duty applications. HEAVY DUTY WHEELS & HANDLE KIT A 009A Makes your heater even more portable and convenient. Fits 35 m

Resumen del contenido incluido en la página 20

HOMELITE 1850 55TH Avenue Lachine (Quebec) H8T 3J5 Unit 212-214 595 Canarctic Drive 590 Ebury Place Downsview, Ontario Annacis Island M3J 2P9 New Westminister, B.C. V3M 6K7 A Deere & Co. Affiliate / Une Filiale de Deere & Co.


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Homelite HH35A Manual de instrucciones Calentador eléctrico 3
2 Homelite HH110 & HH150A Manual de instrucciones Calentador eléctrico 1
3 Homelite HH55 Manual de instrucciones Calentador eléctrico 0
4 Homelite HHC150A Manual de instrucciones Calentador eléctrico 0
5 Homelite HHC50LP Manual de instrucciones Calentador eléctrico 1
6 Homelite HP35 Manual de instrucciones Calentador eléctrico 0
7 Homelite HHC100A Manual de instrucciones Calentador eléctrico 0
8 Homelite HP155A Manual de instrucciones Calentador eléctrico 0
9 Homelite UT65052-A Manual de instrucciones Calentador eléctrico 0
10 Homelite HP275 Manual de instrucciones Calentador eléctrico 0
11 A.O. Smith AH - 290 Manual de instrucciones Calentador eléctrico 6
12 A.O. Smith AHD 290 Manual de instrucciones Calentador eléctrico 7
13 A.O. Smith AHDS 290 Manual de instrucciones Calentador eléctrico 0
14 A.O. Smith ST 3000 Manual de instrucciones Calentador eléctrico 5
15 A.O. Smith WATER HEATERS Manual de instrucciones Calentador eléctrico 13