Manual de instrucciones de Hamilton Beach MCRES-525

Resumen del contenido incluido en la página 1

PARTS LIST – BARBED ADAPTERS ARE SOLD SEPARATELY
Parts QTY PARTS QTY
MCRES-525™ Reservoir 1 Retention screws 4
Fill-cap & o-ring 1 Port plug 1

This product is intended for expert users. Please consult with a qualified technician for installation. Improper installation may result in
damage to your components. Swiftech assumes no liability whatsoever, expressed or implied, for the use of these products, nor their
installation. The following instructions are subject to change without notic

Resumen del contenido incluido en la página 2

Installation guidelines Figure 1: Always leave sufficient slack in the lines to pull enough Figure 2: You can start filling up the reservoir while it is in the drive of the reservoir out of the drive bay and uncover the fill port. bay, using a household funnel. Then, start-up the pump and top-off the reservoir as needed. With this method, you will be able to fill-up the reservoir to its minimum operating level, as shown figure 3. Figure 3: The minimum operating fluid level is at th