Manual de instrucciones de Hunter Fan CeilingLight Kits

Resumen del contenido incluido en la página 1

Installation Instructions
For Hunter Ceiling Fan Light Kits
Aurora Style
Preparing for Installation
CAUTIONS
1. Unassemble the fan switch housing as shown in
Figure 1.
· Read entire text carefully before
beginning installation and save these 2. Disconnect the upper and lower plug connectors
instructions. between the upper switch housing and lower
switch housing.
· To reduce the risk of electrical shock,
Note: Do not discard any parts. You will need to
install this light kit only on listed Hunt

Resumen del contenido incluido en la página 2

Installing the Light Fixture 1. Insert the black wire and white wire from the light kit assembly through the hole in the bottom of the lower switch housing. Refer to Figures 2 and 3. 2. Securely tighten the light kit assembly into the Lower bottom of the lower switch housing. Refer to Switch Housing Figure 3. 3. Install the nut and washer onto the end of the light kit assembly inside of the lower switch housing. Securely tighten the nut and washer. Light Kit Insert and tighten the two #6-32 s

Resumen del contenido incluido en la página 3

Installing Globes and Bulbs Thread the fan switch pull chain through the grommetted hole in the light fixture bracket. Unfasten the extra chain looped through the hole in the in the lower mounting cap and attach it to the fan switch pull chain. Repeat for light switch pull chain. Refer to Figures 5, 6 and 7. 1. Install bulbs. Use 60W Max, A-15 bulbs. 2. Thread the fan switch pull chain through the hole in the metal disk. Hole in Lower 3. Place globe on pipe until flush against metal disk. Mounti