Manual de instrucciones de Monte Carlo Fan Company 5BGR56 Series

Resumen del contenido incluido en la página 1

Owner’s
Manual
Ceiling Fan Installation Instructions
Total fan weight with
light kit included
For 5BGR56 Series Fans
READ AND SAVE THESE INSTRUCTIONS
Quality Ceiling fans

Resumen del contenido incluido en la página 2

Installation SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS 1. Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1996), including fire-rated construction. 2. Use this unit only in the manner intended by the manufacurer. If you have any questions contact the manufacturer. 3. After making the wire connections,

Resumen del contenido incluido en la página 3

8 9 7 Secure mounting neck to the mounting plate Install 6 15 watt candelabra bulbs included. Lift mounting neck to mounting Plate and align with four screws to become a complete mount- screws. ing bracket. 11 12 10 Loosen 4 screws in motor housing then lower Install canopy and yoke cover over the down- Tread leadwires and safety cable through the metal disk with glass onto fan by aligning 4 rod. downrod. key slot holes in metal housing with 4 screws in fan housing. Tighten the 4 screws secur

Resumen del contenido incluido en la página 4

19 20 21 House Fan Black Black White White Green(downrod) Green Green(Bracket) Make wire connections as per above diagram. Connect the white wire from the fan to the White or Neutral wire from the power source. Place floating brackets onto blades aligning Connect the black wire from the fan to the Re-install safety bar removed in step. 3 by holes in blade with the floating bracket. Make Black or hot wire from the power source. placing safety bar on screws, sliding into place, sure that the float

Resumen del contenido incluido en la página 5

31 32 33 Attach cover of remote by placing Install wall control unit to outlet box Remove cover by snaping off from over buttons and snaping into place. using machine screws provided. top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V. 34 35 Fan speed Light dim- control but- mer for up tons and down lights Fan Fan on / off reverse button To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off

Resumen del contenido incluido en la página 6

Trouble Shooting If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning: Before servicing or cleanin

Resumen del contenido incluido en la página 7

REV. 1 2/4/04 Revised safety number 8 & step 2 page 2 & battery remote