Manual de instrucciones de Casio SGW400H-1BV WristSGW400H-1BV

Resumen del contenido incluido en la página 1

MO1011-EA
Operation Guide 5176
ENGLISH
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure barometric pressure, temperature and
altitude. Measured values are then shown on the display. Such features make this
watch useful when hiking, mountain climbing, or when engaging in other such outdoor
activities.
E-1
About This Manual
Warning !
• The measurement functions built into this watch are not intended for taking • Depending on the mo

Resumen del contenido incluido en la página 2

Operation Guide 5176 Selecting a Mode Timekeeping Mode Timekeeping Mode • The illustration below shows which buttons you need to press to navigate between Altimeter Mode Altimeter Mode modes. • In any mode (except when a setting screen, with fl ashing digits is on the display), pressB to illuminate the display. World Time World Time Barometer/ Barometer/ Mode Mode Thermometer Mode Thermometer Mode Countdown Countdown Stopwatch Mode Stopwatch Mode Timer Mode Timer Mode Alarm Mode Alarm Mode Hand

Resumen del contenido incluido en la página 3

Operation Guide 5176 Note Screen To do this: Do this: • For information about selecting a Home City and confi guring the DST setting, see Toggle between 12-hour (12H) and 24-hour PressD. “Confi guring Home City Settings” (page E-14). (24H) timekeeping. • While 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from noon to 11:59 p.m. No indicator appears for times from midnight to Reset the seconds to 00 PressD. 11:59 a.m. With 24-hour format, time is displaye

Resumen del contenido incluido en la página 4

Operation Guide 5176 Altimeter • When mountain climbing, you can specify a reference altitude value in accordance with a marker along the way or altitude information from a map. After that, the The watch displays altitude values based on air pressure readings taken by a built-in altitude readings produced by the watch will be more accurate than they would pressure sensor. without a reference altitude value. How the Altimeter Measures Altitude To take an altimeter reading The altimeter can mea

Resumen del contenido incluido en la página 5

Operation Guide 5176 • Before the city code starts to fl ash, the message SET Hold will appear on the Precautions Concerning Simultaneous Measurement of Altitude and Temperature display. Keep A depressed until SET Hold disappears and the city code starts to fl ash. Though you can perform altitude and temperature measurements at the same time, you should remember that each of these measurements requires different conditions 2. Keep pressing C until TEMP (temperature), ALTI (altitude), or BARO (b

Resumen del contenido incluido en la página 6

Operation Guide 5176 To set an alarm time 4. While a setting is fl ashing, use D (+) and B (–) to change it. 1. In the Alarm Mode, use D to scroll through the alarm • When setting the alarm time using the 12-hour format, take care to set the time screens until the one whose time you want to set is correctly as a.m. (no indicator) or p.m. (P indicator). displayed. 5. Press A to exit the setting screen. AL1 AL2 AL3 To test the alarm In the Alarm Mode, hold down D to sound the alarm. SIG AL5 AL4 Al

Resumen del contenido incluido en la página 7

Operation Guide 5176 • If ERR keeps appearing during measurement, it could mean there is a problem with Specifi cations the applicable sensor. Accuracy at normal temperature: ±30 seconds a month Whenever you have a sensor malfunction, take the watch to your original dealer or Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week nearest authorized CASIO distributor as soon as possible. Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programme