Resumen del contenido incluido en la página 1
OWNER'S MANUAL
6.0 Horsepower
2400 PSI 2.4 GPM
High Pressure Washer
Model No:
919.670280
• Safety
Assembly
PRESSURE WASHER
WARNING: Before using this
Operation
CUSTOMER
product, read this manual
HELPLINE
and follow all Safety Rules
Maintenance
1-800-245-5873
and Operating Instructions.
Parts List
Français
Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8
D20590 Rev. 1 7/13/00
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Warranty........................................................... 2 Storage .......................................................... 15 Safety Guidelines- Definitions ......................... 2 Troubleshooting ............................................. 16 Safety Guidelines ......................................... 3-4 Parts ............................................................... 17 Assembly ..................................................... 5-7 Pump Parts ...
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and operating instructions before using. HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT Spilled gasoline and it’s vapors can become Shut off engine and allow it to cool before ignited from cigarette sparks, electrical adding fuel to the tank. arcing, exhaust gases, and hot engine RISK OF EXPLOSION Use care in filling tank to avoid sp
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS WHAT CAN HAPPEN HOW TO PREVENT IT HAZARD Spray directed at electrical outlets or Unplug any electrically operated product switches, or objects connected to an before attempting to clean it. Direct spray electrical circuit, could result in a fatal away from electric outlets and switches. RISK OF electrical shock. ELECTRICAL SHOCK Your washer operates at fluid pressures Never place hands in front of nozzle. and velocities high eno
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS The powerful spray from your pressure washer is capable of causing damage to fragile surfaces such as: wood, glass, automobile paint, auto stripping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is robust enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel. Operating unit with wa
Resumen del contenido incluido en la página 6
3. Mount the rubber isolator to the frame. To mount Tools Required for Assembly isolator place threaded end of bolt through the Adjustable wrench washer. 5 mm Allen wrench (supplied) Next with washer on bolt place threaded end of bolt through the larger hole in bottom of the rubber isolator. Remove Pressure Washer from Carton Place threaded portion of bolt through the Open carton from the top. Locate and remove from same hole location the wood plank was box the handle, gun, wand,chemical/s
Resumen del contenido incluido en la página 7
7. Place assembled gun and wand on pressure 8. Place pull cord into the wire bracket holder. washer holder. Pull the cord under the wire bracket to the right of the wire loop. Gun/Wand Lift the pull cord handle up and slide the cord Holder to the left, sliding the cord into the wire loop. Next slide handle behind the wire bracket to the left of the wire loop. Cord Engine recoil will pull the cord into its final position. Wire Bracket Checklist Before going any further please review the f
Resumen del contenido incluido en la página 8
Before Starting The Engine WARNING: Read Owner’s Manual. Do not attempt to operate equipment until you have To operate the engine you will need to do the following. read Owners Manual for Safety, Operation, and Maintenance Instructions. CAUTION: Always check engine oil level before every start. Running engine low of oil or Note: Included with your unit is a video cassette that out of oil could result in serious damage. demonstrates how to operate your pressure washer. If you have a video casset
Resumen del contenido incluido en la página 9
Use clean, fresh, regular unleaded gasoline with a Squeeze trigger on pressure washer wand to minimum of 85 octane. Do not mix oil with gasoline. relieve air pressure caused by turning on the water. If unleaded fuel is unavailable leaded fuel may be used. Water will spew out of the gun in a thin stream. This will make it easier to start the engine. IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the Engage the safety latch on the spray g
Resumen del contenido incluido en la página 10
Start the pressure washer as outlined in the “To How To Use Your Pressure Washer Start Your Pressure Washer” paragraph on page 9. Adjusting Chemical Flow Turn the knob on the high pressure soap wand to WARNING: Stand on a stable surface and adjust the soap flow. Turn knob counterclockwise grip gun/wand firmly with both hands. Expect for more soap (+) and clockwise for less soap (-). the gun to kick when triggered. Depress the trigger on the gun to begin spraying. Soap Knob Release trigger
Resumen del contenido incluido en la página 11
MAINTENANCE CUSTOMER RESPONSIBILITIES TABLE Every 25 Every 50 Every 100 MAINTENANCE TASK Before each use hours or yearly hours or yearly hours or yearly PRESSURE WASHER x Check/clean inlet screen. Check high pressure hose. x Check soap and chemical hose and filter x x Check gun and wand for leaks. Purge pump of air and contaminants x ENGINE x Check oil level Change engine oil x Clean air cleaner and precleaner x x Clean/replace spark plug x Clean engine muffler & finger guard Prepare for storage
Resumen del contenido incluido en la página 12
Tilt unit and drain pump oil into appropriate Pressure Washer Maintenance container. Check and Clean Inlet Screen: Examine inlet screen Fill pump with 10 ounces of R&O 150 oil. NOTE: on pump inlet fitting. Clean if clogged; replace if torn. If unable to find R&O 150 oil, use 30W non- Check High Pressure Hose: High pressure hose can detergent oil. develop leaks from wear, kinking, abuse. Inspect hose Replace oil drain plug and tighten securely. each time before use. Check for cuts, l
Resumen del contenido incluido en la página 13
Changing Engine Oil Clean Pre-Cleaner and Air Cleaner Cartridge Change oil while engine is still warm. Preferably Your engine is equipped with an oval dual element air drain oil from top of engine as illustrated below. cleaner: the two elements include a foam pre-cleaner Drain oil with air cleaner side up. Oil can be drained and an air cleaner cartridge. from engine bottom if necessary. To remove the air cleaner element, loosen two IMPORTANT: Before tipping engine or equipment to cover scre
Resumen del contenido incluido en la página 14
SERVICE AND ADJUSTMENTS Carburetor Shut off the pressure washer and turn off the water supply. The carburetor of your high pressure washer is pre-set Disconnect spark plug wire. at the factory. The carburetor should not be tampered with. If your pressure washer is used at an altitude in Pull trigger on gun handle to relieve any water excess of 5000 feet consult with your nearest Sears pressure. Service Center regarding high altitude set changes. Disconnect the wand from the gun. Remove
Resumen del contenido incluido en la página 15
STORAGE Preparing Pressure Washer for Storage CAUTION: While preparing the engine make NOTE: If you do not plan to use your unit for 30 days sure water supply is turned on and flowing to or more, unit should be prepared for storage. the unit. NEVER run unit without water supply running through pump. Failure to do so will cause pump damage. IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, hose or tank during storag
Resumen del contenido incluido en la página 16
TROUBLESHOOTING SYMPTOM SOLUTION CAUSE Engine won’t 1. Slide throttle to "Run" position. 1. Engine throttle is in "OFF" Position. start 2. Slide choke lever to choke position. 2. Choke lever has not been placed to choke. 3. Depress trigger gun. 3. Pressure buildup after initial use. 1. Turn knob counterclockwise for more soap (+). Won’t Draw 1. Adjustment knob on soap nozzle is Chemical turned fully clockwise for less soap (-). 2. Check chemical screen; clean if obstructed. 2. Chemical screen
Resumen del contenido incluido en la página 17
PARTS CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.670280 3 19 1 17 12 24 13 2 11 15 16 900 7 6 4 5 8 23 20 14 21 22 REF NO. PART NUMBER DESCRIPTION 1 D20588 Handle, Bagged 2 C042 Knob - 5/16” PARTS NOT ILLUSTRATED 3 17628 Gun D20590 Owners Manual 4 17709 Tire Semi (8x2”) NCT001 Nozzle Cleaning Tool 5 W137 Nut Pal 1/2” D20667 2 mm Allen Wrench 6 17926 Rubber Foot, Hollow 16806 5 mm Allen Wrench 7 W131 Tee Nut 5/160” x 3/4” F101 Screw, Hex-Engine to Pump 8 17713 Frame F196 Screw, Hex-Engine to Pum
Resumen del contenido incluido en la página 18
PUMP PARTS CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.670280 PUMP BREAKDOWN MODEL PK18148 Bottom View 26-6 26-2 26 26-2 26-4 26-3 26-5 Torque to 531-574 in. -lbs. ORIENTATION VIEW REF ITEMS 22 THRU 25 LOW PRESSURE TORQUE TO 150 IN-LB SEAL 14 ADD TEFLON TAPE TO THREADS HIGH PRESSURE SEAL TORQUE TO 18 110-120 IN-LB 19 17 22 21 15 16 TORQUE TO 150-165 IN-LB 24 ADD TEFLON TAPE TO THREADS 23 25 20 TORQUE TO 135-150 IN-LB 27 21 TORQUE TO TORQUE TO 196-212 IN-LB 140-150 IN-LB 29 TIGHTEN TO
Resumen del contenido incluido en la página 19
PUMP PARTS CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.670280 PUMP BREAKDOWN MODEL PK18148 Key# Part # Description 1 * Oil Seal 3 16364 Plug 3/8 NPTF 4 18110 Gasket, Cam Housing 5 * Bearing Radial Needle 6 * Thrust Washer (1 used) 7 * Bearing Thrust (2 used) 8 * Washer, Thrust (2 used) 10 16301 Washer, Thrust (1 used) 11 16340 Assembly Piston (3 used) 12 16912 Spring Piston (3 used) 16 17701 Swivel, 3/8 NPT 17 F187 Screen 18 16358 Screw, 1/4 -20 x 1 (2 used) 19 16365 O-Ring, Journal P
Resumen del contenido incluido en la página 20
ENGINE PARTS CRAFTSMAN 2400 PSI HIGH PRESSURE WASHER 919.670280 BRIGGS ENGINE MODEL #120612-0152-E10 2 3 584 684 1 585 3 306 307 718 287 847 523 842 525 8 9 524 10 11 529 562 227 615 404 505 616 REF PART REF PART REF PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 692670 Cylinder Assembly 307 690345 Screw 585 691879 Breather Passage 2 399269 Bushing/Seal Kit (Cylinder Shield) Gasket (Magneto Side) 404 690272 Washer 615 690340 Governor Shaft 3 299819 Oil Seal (Governor Cra
