Manual de instrucciones de Woodstock ACCU-SHARP D3978

Resumen del contenido incluido en la página 1

MODEL D3978
®
ACCU-SHARP GRINDING JIG
INSTRUCTIONS
To reduce the risk of serious injury when using
this grinding jig, take the following precau-
tions:
1. GRINDER OWNER'S MANUAL. Read
and understand the owner's manual for your
grinder and always follow all of the safety
precautions and instructions for your grinder.
2. EYE/FACE PROTECTION. Always wear
safety glasses or a face shield to protect your-
self from flying material.
Figure 1. Using the Accu-Sharp Jig to grind the bevel
of a flat

Resumen del contenido incluido en la página 2

Auxilary Table Edge Faces Grinder Installing Auxiliary Table 1. DISCONNECT GRINDER FROM POWER! Clamping Screws & 2. Remove the tool rest table from your grinder. Washers 3. Center the jig auxiliary table over the grinder table, then use a scratch awl through the three 90° Stop mounting holes of the auxiliary table to mark the Pins grinder table (see Figure 3). Note: Make sure that you position the tables so that when the jig is mounted on the grinder, the auxiliary table edge shown in Fi