Resumen del contenido incluido en la página 1
T3 TREADMILL
Owner’s Manual
8972901 REV B-3
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Co r po r at e Hea dqua r t er s 5100 River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • FAX: 847.288.3703 Service phone number: 800.351.3737 (toll-free within U.S.A., Canada) Global Website: www.lifefitness.com Int er nat Io na l o f f ICes Germany & switzerland a ll o ther emea countries & a mer ICa s distributor Business C-emea * l ife f itness europe GmBH north a merica Bijdorpplein 25-31 Siemensstraße 3 l ife f itness Inc. 2992 LB Barendrecht 85716 Unterschleißheim 5100 N Riv
Resumen del contenido incluido en la página 4
Before using this product, it is essential to read this ENTIRE operation manual and ALL installation instructions. This will help in setting up the equipment quickly and in instructing others on how to use it correctly and safely. Note: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accor- dance with the operation manual, may cause harmful interference to radio communications. However, there is no guar- antee that the interference will not
Resumen del contenido incluido en la página 5
TAbl e Of CONTeNTs 1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2. Life Fitness T3 Treadmill Design Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 3. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 3.1 Unpacking . . . . .
Resumen del contenido incluido en la página 6
This Operation Manual describes the functions of the following product: Life Fitness Treadmill Model: T3 Thank you for purchasing a Life Fitness treadmill. Before using this product please read this user manual in its entirety to ensure that you have the knowledge to safely and properly operate all of the features on your treadmill. We hope you achieve the product experience on your treadmill that you expect, but if you do have any service issues please go to the How to Obtain Product Service se
Resumen del contenido incluido en la página 7
1 ImpOr TANT s Af eTy INsTr UCTIONs WAr NING: r eAD Al l INsTr UCTIONs bef Or e UsING THe Tr eADmIl l . sAVe THese INsTr UCTIONs. DANGer : To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or attempting any maintenance activity. WAr NING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet. WAr NING: This treadmill has immobilization software. Only activate t
Resumen del contenido incluido en la página 8
• Use the handrails whenever additional stability is required. In case of emergency, such as tripping, the user should grab the handrails and place his/her feet on the side platforms. The handrails may be held to enhance stability as needed, but are not for continuous use. • Never walk or jog backwards on the treadmill. • Immobilize the treadmill so the motors will not run when the unit is not in use. To do this, press and hold both the SPEED DOWN ARROW and the STOP key on the activity zone. • U
Resumen del contenido incluido en la página 9
Console iPod Docking Station USB Port Headphone Jack Reading Rack Activity Zone Contact Heart Rate Sensors Water Bottle Holder Handlebar Extension Console Bridge Assembly Emergency Stop Left Upright Right Upright On / O! Switch Circuit Breaker Power Cord Motor Cover Side Rail Running Belt / Running Deck Base Frame Assembly Rear Roller Adjustment Bolts 2 l If e f ITNess T3 Tr eADmIl l DesIGN Il l UsTr ATION T3 with Track Console Roller End Ca
Resumen del contenido incluido en la página 10
3 Assembl y For safety, and to save time and effort, read this Owner’s Manual completely before installing your Life Fitness Treadmill. Place the treadmill near where it will be used before beginning the unpacking procedure. 3.1 UNpACk ING These unpacking instructions assume you have already done the following: • Removed the top of the shipping carton. • Removed the styrofoam packing material. • Removed these assembly instructions from the bridge assembly carton. The best method for unpacking th
Resumen del contenido incluido en la página 11
3.2 COmpONeNT l IsT & HAr DWAr e Identify the following components after unpacking your treadmill: 1. Left Upright Qty: 1 8. M8 X 15MM Bolt (Black) Qty: 4 2. M8 X 60MM Bolt (Silver) Qty: 6 9. M8 X 15MM Tapered Bolt (Silver) Qty: 6 3. Star Washers Qty: 13 10. 6MM Hex Head Wrench Qty: 1 5MM Hex Head Wrench Qty: 1 4. Right Upright Qty: 1 11. Power Cord (120V) Qty: 1 5. Console Assembly Qty: 1 12. Emergency Stop Lanyard Qty: 1 6. M8 X 25MM Bolt Qty: 3 13. M8 X 120MM Bolt Qty: 2 7. Handrail Extensio
Resumen del contenido incluido en la página 12
3.3 INsTAl l ING Upr IGHTs AND HANDl ebAr s Remove the motor cover by removing four Phillips screws. Locate the left upright (1). Position the left upright near the left upright bracket and attach the wire connectors that lead from the bottom of the left upright and the left upright bracket. Be sure the connectors are fully seated together. Feed any excess wire into the hollow inside of the left upright. Put the uprights in their brackets by first inserting them at an angle tilting away from th
Resumen del contenido incluido en la página 13
3.4 INsTAl l ING THe CONsOl e Remove the pre-installed bolt (A) from the back of the main console (B). Position the main console near the top of the console bridge and attach the connectors leading from the console bridge to the corresponding tabs on the back of the main console. The main console harness (C) is the largest connector. The Activity Zone harness (D) is the mid-size con- nector. The grounding wire (E) is the small green and yellow wire that inserts onto any of the three metal circui
Resumen del contenido incluido en la página 14
3.5 ATTACHING THe pOWer COr D Insert the female plug of your treadmill’s power cord into the male outlet next to your treadmill’s power switch. Note: T3 treadmills shipped in the USA and Canada are supplied with a North American line cord. Attach the cord suited to your area. 3.6 CAl Ibr ATION Before using your treadmill please follow the calibration instructions below. Please stand to the side of your treadmill during calibration. 1. Turn treadmill on, or if on press the RESET key. 2. The con
Resumen del contenido incluido en la página 15
4 s eTUp e l eCTr ICAl pOWer r eq UIr emeNTs Most Life Fitness Treadmills are intended for use on a normal 120 volt circuit in the United States and Canada. Below is a table that provides the current rating for this product based on supply voltage. Make sure that the treadmill model sup- ports the proper line voltage for the installation location before plugging into the outlet. Line voltage is noted on the prod- uct’s serial label. supply Voltage (VAC) f requency (Hz) maximum Current (Amps) 120
Resumen del contenido incluido en la página 16
pOWer s WITCH Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions - "I" (one) for ON and "0" (zero) for OFF. ImmObIl IzING THe Tr eADmIl l When it is necessary to immobilize the treadmill, press and hold both the SPEED DOWN ARROW and the STOP keys on the activity zone. Use the same key sequence to mobilize the treadmill. 14
Resumen del contenido incluido en la página 17
5 ACTIVITy z ONe AND HeAr T r ATe s eNsOr OVer VIeW D F E G Low Low W Walk alk SSTA TARRT T SSTO TOP P INCLINE INCLINE SPEED SPEED M Mid id Jog Jog H I High High Run Run J D. Start: Causes the belt to begin moving at .5 mph and 0% elevation. E. Stop: Causes the belt to slow to a gradual stop. One push pauses the workout, two pushes displays workout infor- mation, and three pushes reset the workout. F. Incline Arrows: Change the belt’s incline gradually, increasing (up arrow) or decreasing (down
Resumen del contenido incluido en la página 18
HAND pUl se s eNsOr s ysTem The hand pulse sensors (K) are the built-in heart rate monitoring system on the treadmill. During a workout, grasp the sensors that are set into the handlebars. For an accurate reading, use a comfortable grip. The console displays the heart rate after 15 to 20 seconds. K 16
Resumen del contenido incluido en la página 19
6 s er VICe AND TeCHNICAl DATA 6.1 Tr OUbl esHOOTING problem Cause / solution You may be in “Energy Saver Mode”. Press the “Energy Saver” button to see if console turns on. Check to see if the treadmill is plugged in and if the ON/OFF switch is on. The treadmill console does not turn If the ON/OFF switch is on verify that the treadmill power cord is not on when the ON/OFF switch is damaged and the wall outlet is functioning (tripped breaker in house). turned on. If the ON/OFF switch is on v
Resumen del contenido incluido en la página 20
18 problem Cause / solution The console may not have recognized the USB stick. Try unplugging the When I try to save a workout on the USB stick and plugging it back in. USB stick I receive the following The USB stick may be full. message: UNABLE TO SAVE SEE MANUAL. The USB stick may not be compatible with the product. Note: Applies to Track Console only. Try using a different USB stick. Potential reasons for the wireless heart rate not to work properly include: 1. The wireless heart rate is t
