Resumen del contenido incluido en la página 1
003–3273–012510D
Resumen del contenido incluido en la página 2
Para obtener este manual en Español Latino Americano vaya a: http://support.nautilus.com. Table of Contents 3 14 Important Safety Instructions — Assembly Important Safety Instructions — Operation 4 Specifications Features 17 Before Assembly 5 Operations 25 T ools 6 Maintenance 31 6 36 Hardware T roubleshooting 7 Parts Contacts 38 Assembly 8 Guide de Montage et du Propriétaire 39 Leveling the Machine 13 Patent Information This product may be covered by US and Foreign Patents and Patents Pending.
Resumen del contenido incluido en la página 3
Important Safety Instructions Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury . Obey the following warnings: Read and understand all warnings on this machine. Carefully read and understand the Assembly Manual. • • • Keep bystanders and children away from the product you are assembling at all times. • • • Do not connect power supply to the machine until instructed to do so. • • • Do not assemble this machine outdoors or in a wet or moist
Resumen del contenido incluido en la página 4
Specifications Nautilus® T514 Treadmill Dimensions Capacities Length 74" / 188 cm Maximum User W eight 350 lb / 158 kg Width 32" / 81 cm W orkout Programs 16 Height 54" / 137 cm Speed Range 0.5–12 mph / 0.8–19.3 km/h Assembled Unit W eight 205 lb / 93 kg Elevation Range 0–12% Folded 39" X 32" X 60" / 99 X 81 X 152 cm Shipping Weight 233.7 lb / 106 kg Component Specifications Frame, Folding Steel Regulatory Approvals Motor 2.75 CHP DC Intertek ETL listed. Conforms to ANSI / UL1647. 4th ED. Deck S
Resumen del contenido incluido en la página 5
Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of minimum 201” x 71” (5.1m x 1.8m). Follow these basic points when you assemble your machine: 1. Read and understand the “Important Safety Instructions” before assembly. 2. Collect all the pieces necessary for each assembly step. 3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighte
Resumen del contenido incluido en la página 6
Tools Included Not Included 6mm 5mm Hardware Item Qty Description A 2 M10 x 60L Button Head Hex Screws, pre-installed 2 B M10 Nylock Nuts, pre-installed C 2 M8 x 70L Flathead Hex Screws D 4 M4 x 10 Phillips Head Screws, pre-installed (model T514) 6 M4 x 10 Phillips Head Screws, pre-installed (model T516) E 2 #8 x 1/2L Phillips Head Bolts, pre-installed F 4 M8 x 15L Button Head Hex Screws, 2 pre-installed 4 G M8 washer , 2 pre-installed 6 6 6
Resumen del contenido incluido en la página 7
Parts Item Qty Description 1 1 Frame 2 2 Console Side Panels 3 2 Side Covers (model T516 only) 4 1 Power Cord 5 1 Rear End Cap (model T516 only) 7 7 7
Resumen del contenido incluido en la página 8
Assembly 1. Unfold Frame Note: Hold one Upright (1A) and the Ergo Bar (1B) when you lift the folded uprights into position. Keep your hands clear of the area between the Ergo Bar and the Upright. 8 8 8
Resumen del contenido incluido en la página 9
2. Install Screws and Adjust Handlebars Note: T ighten pivot screws (A1). 9 9 9
Resumen del contenido incluido en la página 10
3. Install Screws in Handlebars 10 10 10
Resumen del contenido incluido en la página 11
4. Adjust Console/Ergo Bar and Install Console Side Panels 11 11 11
Resumen del contenido incluido en la página 12
5. Attach Side Covers and Rear End Cap (model T516 only) 12 12 12
Resumen del contenido incluido en la página 13
6. Connect Power Cord Final Inspection Inspect your machine to ensure that all fasteners are tight and components are properly assembled. Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’ s Manual. Leveling the Machine T o stabilize the treadmill, adjust the 2 feet below the front of the base frame. • • • Lift one side of the machine and turn the foot — clockwise to shorten or counterclockwise
Resumen del contenido incluido en la página 14
Important Safety Instructions Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury . Before using this equipment, obey the following warnings: T o decrease the risk of burns, electric shock, or injury to persons, read and understand the complete Owner’ s Manual. Failure to follow these guidelines can cause a serious or possibly fatal electrical shock or other serious injury . Keep Owner’ s Manual for future reference. Read and understand all
Resumen del contenido incluido en la página 15
• • • Do not let liquids touch the electronic controller . If it does, the controller must be inspected and tested for safety by an approved technician before it can be used again. • • • Do not remove the machine motor cover , dangerous voltages are present. The components are serviceable only by approved service personnel. • • • The electrical wiring for the residence in which the machine will be used must obey the applicable local and provincial requirements. Safety Warning Labels and Serial N
Resumen del contenido incluido en la página 16
A VERTISSEMENT Le non-respect de ces mesures de protection pourrait entraîner des blessures ou de graves problèmes de santé 1. Gardez les enfants et les animaux de compagnie éloignés de cette machine en tout temps. 2. Lorsque cette machine n’est pas utilisée, retirez le cordon de sécurité et gardez-le hors de la portée des entants. 3. Soyez prudent lorsque vous utilisez cet équipement pour ne pas vous infliger de graves blessures. 4. Lisez et familiarisez-vous avec le Manuel du propriétaire et a
Resumen del contenido incluido en la página 17
Features A Console L W alking Belt B W ater Bottle Holder M Side Foot Support Rails C Magazine Rack N Support Bar D Handlebars O Hydraulic Lift E Remote Speed Control P T ransport Wheels F Contact Heart Rate (CHR) Sensors Q Base G Safety Key Port R Adjustable Feet H Uprights S Remote Incline Control I Motor Cover T Ergo Bar J Power Switch U Fan K Power Cord V Heart Rate (HR) Chest Strap 17 17 17
Resumen del contenido incluido en la página 18
Console Features AA Dual LCD — Backlit Display FF Fan Button BB Preset Speed Keys GG Stop CC Speed Up/Down HH Profiles/Courses DD Enter/Reset II Incline Up/Down EE Quick Start (Start) JJ Preset Incline Keys LCD Display Data The multi-function, backlit LCD shows your workout measurements (during the workout), results, user setup data and console diagnostics. 18 18 18
Resumen del contenido incluido en la página 19
AA1 Program Display AA5 PULSE AA2 TOT AL TIME AA6 CALORIES AA3 DIST ANCE (km/miles) AA7 SPEED / P ACE TIME AA4 INCLINE Note: T o change the measurement units to English Imperial or metric, refer to the “Changing Unit Measures (English/Metric)” section in this manual. Program Display The Program Display shows the name of the program selection and the dot-matrix area shows the course profile for the program. Each column in the profile shows one interval (1/12 of the total program time). The higher
Resumen del contenido incluido en la página 20
Distance The DIST ANCE display field shows the distance count (miles or km) in the workout. If no distance goal is set up for the current workout program, the display value starts at zero and counts forward until the end of the workout. If the workout has a distance goal, the display starts at the preset value and counts down to zero. Incline The INCLINE display field shows the treadmill incline in percentage of elevation. Pulse The Pulse display field shows the heart rate in beats per minute (B
