Resumen del contenido incluido en la página 1
Fuzzy Computerized Automatic
User's manual
Washing Machine
User's manual
This manual is for
XQS60-78H
Please read this manual
carefully before using.
Retain it for future reference.
W
0030804888A
Resumen del contenido incluido en la página 2
CONTENTS Names of the parts.................................................................1 Safety precautions .................................................................2 Installation and adjustment ....................................................4 Install the water inlet hose.......................................................6 Preparation before washing ...................................................8 Put in the laundries ........................
Resumen del contenido incluido en la página 3
Names of the parts Top lid component Inner cover component Top lid handle Detergent box Round cover liquid whitener inlet Control panel Attachment block Outer tub cover (2 pieces) Balance ring Pulsator Water inlet valve Lint Filter Water absorption Inner tub cushion Front control board Handle Cabinet Power cord Base frame Adjustable leg Drain hose Fixed leg (3 pieces) Back cover Adjustable leg film Meaning and description of the symbols Warning sign Contents marked with that symbol ar
Resumen del contenido incluido en la página 4
Safety precautions In normal usage of the washing machine, the power Please plug the plug on special 220V AC receptacle. plug shall be ready to be pulled or plugged with hang. Be sure to use single-phase three pins receptacle. Be sure to pull the plug off and close the water faucet Ensure the earthing prong of the power receptacle is when occurring power failure, delivering the maching, earthed reliably. Use leakage protector if possible. setting the machine idle or cleaning the machine,
Resumen del contenido incluido en la página 5
Safety precautions Do not put hand into the rotating tub. It is dangerous Do not decompose, repair or alter the machine by even if the rotation speed is slow. Take special care of yourself. the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the Do not wash laundry with volatile materials kettle with hot water) on the washing machine. (such as thinner, petrol etc.). Benzene Keep the machine away from direct
Resumen del contenido incluido en la página 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove. 3.Firstly insert the inner cover shaft of one side into the c
Resumen del contenido incluido en la página 7
Adjust the Installation position The largest allowable slope of the shank base of the machine is 1 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal. Adjust the adjustable leg: 1 .To twist the adjustable leg, please first lift up the side of the leg slightly, loosen the adjustable nut, The adjustable nut and twist the leg. 2 . After adjus
Resumen del contenido incluido en la página 8
Install the water inlet hose Confirm the water faucet water faucet, suitable water faucet, not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever an
Resumen del contenido incluido en la página 9
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the nut of the water cushion is dropped or damaged before each usage. If it happens inlet hose please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. water absorption jointer of the cushion. water inlet valve Connection between the jointer of the water i
Resumen del contenido incluido en la página 10
1 Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. Fasten the buttons The quantity of the When the pulsator is special requirement Take out the coins
Resumen del contenido incluido en la página 11
2 Put in the laundries The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest capacity of this machine is 6.0 kg. The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable amount of laundries and the laundries can be turned
Resumen del contenido incluido en la página 12
Minutes Minutes Times Minutes 4 Use the operation buttons Description of the function of buttons Digital tube Mode and meaning of the indicators During sensing, it displays During operation of programs, it displays the remained time Flashing: indicate the running program (minute) or remained times of the corresponding procedure On: indicate the program about to run, or indicate the selected mode SOAK WASH RINSE SPIN WASH button RINSE button SPIN button SOAK button Push the WASH button to set
Resumen del contenido incluido en la página 13
START/PAUSE button WATER LEVEL button CHILD LOCK FUNCTION POWER ON/OFF button Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF Push the ON/OFF button to switch button. The digitron displays CL . You can continue setting desired washing procedures. on the power. When the power is on, push it After setting, push down the START/PAUSE button. The child lock function is activated. All of the buttons are locked and cannot make selection. again to swi
Resumen del contenido incluido en la página 14
Minutes Minutes Minutes Minutes Times Times Minutes Minutes Steps of using the operation buttons and description of the steps b POWER ON/OFF START PAUSE PROGRAM WATER LEVEL RESERVE/ 1 Push the "POWER ON/OFF " button to switch on the power. POWER ON/OFF 2 Push the "PROGRAM" button to select suitable automatic program. PROGRAM After switching on the power, the machine will set "STANDARD " program automatically. To select other automatic program, push the "PROGRAM" button till the relative indicat
Resumen del contenido incluido en la página 15
After switching on the power, the washing machine will set to common program including"wash, rinse,spin "automatically. To select other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN" button to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former procedures will turn off automatically. The former procedures will not run. For instance: after swi
Resumen del contenido incluido en la página 16
Push the "RESERVE/CALEFACTION "button to select suitable reserve wash program RESERVE/CALEFACTION After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the "RESERVATION/CALEFACTION" button to set a reserved wash program. Refer to The button of "RESERVATION/CALEFACTION" on page 11. Confirm the reserve program Page 11 When "RESERVATION" becomes active, the nixie tube displays the time
Resumen del contenido incluido en la página 17
7.Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. Clean the detergent box and set it on It must be cleaned in time after each using the control panel seat. 1.The method of dismantle : Push it up aslant and gently. Lint filter: 2.The method of install : install it
Resumen del contenido incluido en la página 18
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle The digitron displays E0. The to
Resumen del contenido incluido en la página 19
Packing list Name Quantity Storage position One Inside the document bag User's manual Warranty manual Inside the document bag One Components of the water inlet hose The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet Inside the accessory bag One The end connecting to the water inlet hose jointer Water inlet hose (1 piece) Water inlet hose joint (1 piece) Between the upper cushion of the Bottom plate One washing machine package and the upper
