Resumen del contenido incluido en la página 1
Washing machine
LBS 845
Resumen del contenido incluido en la página 2
Contents Specifications of your Washing Machine > 4 > 5 Warnings > 6 Installation > 8 Preparation > 9 Program Selection and Operating Your Machine > 13 Maintenance and Cleaning 2 1 2
Resumen del contenido incluido en la página 3
Your Washing Machine Adjustable feet Detergent Drawer Front door Control panel Filter cover Tabletop 3 2 3
Resumen del contenido incluido en la página 4
Specifications of your Washing Machine Maximum dry laundry capacity (kg.) 4.5 Height (cm.) 85 Width (cm.) 60 Depth (cm.) 45 Net Weight (kg.) 58 Electricity (V/Hz.) 230/50 Total Current (A) 10 Total Power (W) 2350 Washing -rinsing cycle (cyc/min) 52 Spinning cycle (max cyc/min) 800 In order to improve the product quality, modifications can be made in the specifica- tions without prior notice. The illustrations in this guide are schematic and may not exactly match with your product. The valu
Resumen del contenido incluido en la página 5
Warnings • This product is designed for home might be little amount of water in your use. machine. This does not have any damage to your machine. • Your washing machine is adjusted to 230V. • Your machine is programmed for start- • If the fuse in your house is less than ing operation again when electricity 16A than have a certified electrician is off and on afterwards. You can deploy an 16A fuse. not press On / Off button to cancel • In case of transformer or non-trans- program. Ma
Resumen del contenido incluido en la página 6
Installation 1. Removing the packaging reinforcements To remove the packaging reinforcement lean the machine backward, take the reinforcement by pulling from the braid. 2. Removing the transportation safety bolts Before operating the machine, the transportation safety bolts must definitely be removed. For this, 1. Loosen the “C” bolts thoroughly by turning them anticlockwise with the help of a suitable wrench. 2. Pull off the transportation safety bolts. 3. Insert the “P” plastic caps in
Resumen del contenido incluido en la página 7
Water connections Models with double water inlets can be used as a model with a single water inlet by using a plug. Plug should be installed to the hot water valve. A rubber gasket should be used in order to prevent water leakage from the connection point. Do not connect the product with single wa- a) Water inlet hose ter inlet to the hot water tap. The product The specific hoses that come with the may switch to the protection mode if the machine are connected to the water inlet temper
Resumen del contenido incluido en la página 8
Electrical Connection Plug in the grounded plug at the end of the power cable of the washing machine to a grounded wall outlet which is fed with suitable voltage and current. Preparation • Please note the followings before start ing to wash your laundry: - Have you plugged the machine? - Have you connected the drainage hose as necessary? - Have you closed the front door? - Have you opened the tap? • If you are installing your machine by your- self, please read the “Instal
Resumen del contenido incluido en la página 9
Put the powder detergent and softener into the appropriate compartments in the detergent drawer and close the deter- gent drawer. Pour the softener as recommended in the package (generally <100ml; i.e. 1 tea cup) Never exceed the “MAX” marking. If you put more, it will mix into I. Compartment I, the powder detergent the washing water via siphon (III) and it will be wasted. In this case, it may be compartment for prewash. necessary to refill the softener. If the II. Compartment
Resumen del contenido incluido en la página 10
Pressing the “On/Off” button never means that the program is started. You must press “Start/Pause/Cancel” button in order the machine starts its program. Program selection table Determine the suitable program accord- the program selection knob to the program- ing to the type, amount, dirtiness level and temperature position that you want to wash washing temperature of the laundry by with. looking at the program selection table. Turn Program Laundry type Cotton 90 Very dirty, heat resistant
Resumen del contenido incluido en la página 11
Function Selection Additional functions selectable accord- cotton program, quick wash and rinse ing to selected program can be selected plus auxillary functions can not be se- by pressing related key. Led of selected lected together. After selecting quick wash function will be on. program, if rinse plus key is pressed fast If not selected together some additional program will be on and quick wash func- functions go off when it is not selected tion led will go off. with other one. For example;
Resumen del contenido incluido en la página 12
Cotton40 can be used. For selecting is changed during the program initially Cotton40 instead of Cotton60 by press- selected program will be executed. For ing “Start/Pause/Cancel” key machine changing washing program continuing is switched to pause position. Program program must be cancelled. knob is turned for selecting Cotton40 Although selected auxillary functions program. must be compatible with washing pro- Even when the program selection knob gram. Adding laundry If you want to add lau
Resumen del contenido incluido en la página 13
Maintenance and cleaning Detergent Drawer The powder detergent remnants may accumulate in the detergent drawer. To clean the detergent drawer, pull the drawer towards you by pressing the marked point of the siphon in the softener compartment as shown in the illustration. Wash the drawer in the sink with plenty of water. Siphon Do not forget to clean the siphon (the colored part in the detergent drawer) when it gets dirty. To remove the siphon, first take out the detergent drawer. To p
Resumen del contenido incluido en la página 14
Hose Since there is a risk of freezing especially be drained by removing the pump filter. in the cold areas, the water remaining in Water inlet hoses should also be emptied the appliance can frozen and damage the by removing them from the taps. appliance. In this case, the water remaining in the pump and hoses should Cleaning the pump filter • Clean the foreign substance filter periodically at least for once! • If the foreign substances (coins, but- tons, baby socks and etc.) clog the foam
