Manual de instrucciones de Invacare 9800A

Resumen del contenido incluido en la página 1

INVACARE 9800A BOOM RETRO-FIT
KIT NO.1060539
Installation, Assembly and Operating Instructions
SAFETY SUMMARY Pump Removal (FIGURE 2)
WARNING/CAUTION notices apply to hazards and
1. Remove the nut and bolt that secure the pump
unsafe practices which could result in personal
to the boom assembly.
injury and/or property damage.
WARNING
Nut
Check all parts for shipping damages before using.
Boom
In case of damage, DO NOT use the equipment.
Bolt
Contact the Dealer/Carrier for further instructions.
D

Resumen del contenido incluido en la página 2

ASSEMBLY OF THE EXISTING PUMP, NEW Swivel Bar Attachment with Mounting BOOM AND SWIVEL BAR ASSEMBLIES Bracket (FIGURE 5) Pump Assembly 1. Pull the pin up through the swivel bar pad. 1. Using the nut and bolt provided, assemble the 2. Line-up hole in pin with mounting bracket holes pump to the new boom. Refer to FIGURE 2. and secure with shoulder screw and nut provided. Boom Assembly (FIGURE 4) NOTE: The swivel bar has hooks on both ends 1. Align the holes of the boom assembly and mast as- to ac