Manual de instrucciones de Applica LME9000MW

Resumen del contenido incluido en la página 1

Models
LMT250
™
Kitty Kabana
LME9000MW
LITTER BOX COVER
LME9250
3
4
Getting Started
1
Make sure you have all of the parts listed below
1. Transparent tubes (2)
2. Metallic rod
3. Curved tubes (already preassembled in kabana)
4. Preassembled Kabana
2
To Assemble
C
B
A
2. Position the ends of the metallic rod over the curved tubes that are already
1. Insert the metallic rod through the
preassembled inside the kabana (B).
looped fabric located on top of the
preassembled kabana (A).
3. Pres

Resumen del contenido incluido en la página 2

2. Insert the kabana's 4 curved tube ends into the plug holes on the litter box's top housing, one at a time (E). E 3. Lift the kabana's side flap to reveal the looped fabric on the inside of the kabana (F). F 4. Insert the transparent tube through the looped fabric of the kabana (G). G 5. Insert the transparent tube into the latch of the curved tube end on both ends of the kabana (H). 6. Repeat steps 3 - 5 to assemble the other side of the kabana. 7. Your LitterMaid Kitty Kabana™ is now f