Resumen del contenido incluido en la página 1
Parts
General Assembly - 1520 Model
Wing Driveline (pg. 57)
Center Shield
Main Driveline Right Wing Assembly (pg. 43)
Assembly
(pg. 55-56)
Wing Lift Cylinder, 3” x 16” (pg. 53)
(pg. 46)
Rephasing Cylinder, 3” x 8” (pg. 54)
Center Section
Hitch Assembly
Assembly
(pg. 45)
(pg. 41-42)
Right Wheel Strut
(Walking Axle
also available)
(pg. 48)
Tie Bar Assembly (pg. 41)
Center Driveline (pg. 58)
Wing Driveline (pg. 57)
Pan, Blades, &
Hardware (pg. 50)
Left Wing
Assembly
(pg. 43)
Rephasing
Resumen del contenido incluido en la página 2
Center Frame Assembly 500800 - Complete Tie Bar, (no pins) (2) Use non-removable loctite when replacing splitter box 500805 - Tie Bar Clevis, Front (2) bolt hardware. 118973 - Bolt, 1/2” x 2-3/4” UNC (4) 500819 - Pin, 1-1/4” x 2-1/16” (4) 118729 - Lock Nut, 1/2” UNC GRC Unitorque (4) 118110 - Bolt, 5/16” x 1” UNC (4) 118530 - Lock Washer, 5/16” (4) 118731 - Flat Washer, 5/16” SAE (4) 160004 - Cone Shield, 9” Diameter (1) 118456 - Lock Nut, 1” UNC (2) 131020 - Flat Washer, 1” SAE (2) 118843
Resumen del contenido incluido en la página 3
Center Frame Assembly 118901 - Lynch Pin, 3/6” x 1-1/2” (1) Counter Clockwise 170063 - Gearbox 1000 RPM OR 118378 - Bolt, 5/8”x 1-3/4” (2) 170017 - Gearbox 540 RPM 118983 - Bolt, 1/4” x 3/4” (4) 118447 - Lock Nut, 5/8” 118555 - Flat Washer, 1/4” (4) GRC-Unitorque (2) Clockwise 133100 - Manual Holder (1) 170061 - Gearbox 1000 RPM 118537 - Flat Washer, 118555 - Flat Washer, 1/4” (4) OR 5/8” SAE (2) 170019 - Gearbox 540 RPM 118483 - Lock Nut, 1/4” 501005 - Urethane Bumper (2) - U
Resumen del contenido incluido en la página 4
Right / Left Wing Assembly (Right Wing Assembly Shown) 500869 - Wing Skid Shoe - LH (1) 118417 - Lock Nut, 3/8” 500608 - 5 Bolt Chain Safety Bar (3) 118729 - Lock Nut, 1/2” GRC Unitorque (6) UNC GR5 (25) 500912 - Cable, 1/4” x 71” (1) 118512 - Flat Washer, 1/2” (6) 118511 - Flat Washer, (Optional) 3/8” (25) 118642 - Carriage Bolt, 1/2” x 1-1/4” (6) 500600 - 3 Bolt Chain 118964 - Carriage Bolt, 500868 - Wing Skid Shoe - RH (1) Safety Bar (2) 3/8” x 3” (25) Wing Driveline 160002 - (1000 /
Resumen del contenido incluido en la página 5
Counterweight Assembly (1020 Model Only) 118966 - Roll Pin, 5/16” x 1-3/4” (2) 500837 - Hinge Pin, 1-3/16” x 97-3/4” (1) 500265 - Counterweight Frame (1) 500870 - Counterweight Skid (1) 118984 - Bolt, 1-1/4” x 3” GR5 (2) 500257 - Bolt Plate (2) 118445 - Lock Nut, 1-1/4” GR5 (2) 117436 - Bolt, 1” x 8-1/2” GR5 (6) 118417 - Lock Nut, 3/8” UNC GR5 (4) 306356 - Chain, 5/16” - 11 Links (4) 118511 - Flat Washer, 3/8” (8) 118136 - Bolt, 3/8” x 1-1/2” (4) 500869 - Wing Skid Shoe - LH (1) 500868 -
Resumen del contenido incluido en la página 6
Hitch Assembly 143111 - Hose Holder (1) 118024 - Bolt, 5/8” x 1-1/2” UNC (1) 118514 - Washer, 5/8” (1) 500300 - Hitch Frame (1) 118447 - Lock Nut, 5/8” UNC 118422 - Lock Nut, 3/4” UNC (3) Unitorque (1) 118516 - Flat Washer, 3/4” (6) 500328 - Jack Holder (1) 118043 - Bolt, 3/4” x 2” UNC (3) 118336 - Grease Fitting, 1/4” (1) 118962 - Lock Nut, 1-1/4” UNF GR8 (1) 117111 Bushing (2) 131206 - Flat Washer, 1-1/4” SAE (1) 500312 - Swivel Hitch (1) 132051 - Sidewind Jack (1) 118929 -
Resumen del contenido incluido en la página 7
Center Shield and Hydraulic Hose Clamps 500715 - Center Shield Assembly (1) - includes - 133093 - Capscrew, M8 x 1.25 x 30mm (2) 133092 - Plastic Handle (1) 133094 - Nut, M8 x 1.25mm (2) Hose Clamp Layout Assembly (See Detail Below) Single Acting Hose Clamp Layout Double Acting Hose Clamp Layout 118945 - Bolt, 5/16 x 2-3/4 UNC (1) 118144 - Bolt, 5/16 118144 - Bolt, 5/16 x 1-1/2 UNC (2) x 1-1/2 UNC (1) 780279 - Top Plate (2) 780279 - Top Plate (2) 780278 - Hose Clamp Block (2) 7802
Resumen del contenido incluido en la página 8
Rockshaft Assembly 500840 - Transport Lock Rockshaft Suspension Detail 243500 - Lock Pin, 5/16” x 2-1/2” Preloading of rubber spring required on all strut assemblies. Exposed thread length should be 131020 - Flat Washer 1” SAE (2) approximately 1/2” 118966 - Roll Pin, 5/16” x 1-3/4” (2) when using correct 500412 - Pin, 1” x 4-11/16” hardware. 500400 - Rockshaft 117111 - Bushing, 1-1/2” OD x 1” 500330 - Bolt, 1-1/4” x 7-1/2” UNF 118962 - Lock Nut, (c/w Grease Fitting) 1-
Resumen del contenido incluido en la página 9
Wheel Strut Assemblies Upper Strut Wing Suspension Detail Common Preloading of rubber spring required 500450 - Upper Strut, on all strut assemblies. Exposed - Right Side (Not Shown) thread length should be approximately 3/8” 500455 - Upper Strut, when using correct - Left Side (Shown) hardware. 500330 - Bolt, 1-1/4” x 7-1/2” UNF (c/w Grease Fitting) Suspension Components 131206 - Flat Washer,1-1/4” SAE 118962 - Lock Nut,1-1/4” UNF GR8 117461 - Bolt, 5/8” x 6” UNC GR8
Resumen del contenido incluido en la página 10
Hub & Spindle 131390 - Hub & Spindle Assembly 131382 - Spindle, S517-1 (1) This model comes with a three 131393 - Seal, Retainer - CTD 2762C (1) piece seal and different hub. All other components common with 131392 - Seal, V - CTD 2764 (1) 131380 Hub/Spindle Assembly. 131391 - Seal, C/Face - CTD 2763C (1) 131024 - Cone, Bearing - LM48548 (1) 131025 - Cup, Bearing - LM48510 (1) 131389 - Hub, CTD 517-7 (c/w studs & cups) (1) 118336 - Grease Fitting (1) 131380 - Hub & Spindle Assembly 131386 -
Resumen del contenido incluido en la página 11
Note: See Gearbox Details pg. 60-64 for correct Cutter Pan Mounting Hardware Blades, Pan, & Hardware including nuts, coned washers, & cotter pins. Standard Blade Carrier Assembly 117417 - Blade Lock Nut (Tapered) (1) 500525 - Blade Carrier (1) Coned Washer Castle Nut Cotter Pin 117415 - Blade Bolt - Square Clockwise Blades Shoulder (Tapered) (1) Optional Skid Pan Assembly 501015 - 4” High Suction Blade (1) 118949 - Blade Bolt Lock Nut (1) 501029 - 4” High Suction- Twist
Resumen del contenido incluido en la página 12
Hydraulic Schematics Height Control Cylinders - 1520 Model (Note: Cylinder details are shown on a separate page) 141581 - Coupler, Tip (2) 141515 - Nipple, (2) 126666 - Hose, 3/8 x 192” 126667 - Hose, 3/8 x 246” 141504 - Elbow, 90° 141515 - Nipple 126503 - Hose, 3/8 x 82” 141616 - Elbow, 45° (4) 122836 - Wing 122830 - Wing Height Cylinder Height Cylinder (3-1/4” x 8”x 1-1/4”) (3” x 8”x 1-1/4”) 126626 - Hose, 3/8 x 168” 122850 - Center Height Cylinder, (3-1/2” x 8” x 1-1/4”) Wing Lift Cy
Resumen del contenido incluido en la página 13
Hydraulic Schematics Height Control Cylinders - 1020 Model Hydraulic Fitting Guide (Note: Cylinder details are shown on a separate page) 141581 - Coupler, Tip - 3/4 ORB F 141581 - Coupler, Tip (2) 141515 - Nipple, (2) 141506 - Orifi ce, 126666 - Hose, 3/8 x 192” Plate 0.0700” ID 126667 - Hose, 3/8 x 246” 141515 - Nipple, - 3/4 JIC M x 3/4 ORB M 141513 - Elbow, 90° - 3/4 JIC M x M 141504 - Elbow, 90° 141501 - Tee, 141515 - Nipple - 3/4 JIC M x M x M 126503 - Hose, 3/8 x 82” 122850 -
Resumen del contenido incluido en la página 14
Cylinders 122875 - Wing Lift Cylinder (with Internal Compression Spring) - 3” x 16” x 1-1/2” 122879 - Rod/Clevis - 1-1/2” x 16” 118796 - Bolt, Shoulder - 1/2” UNC 122556 - Cap, Open - 3” x 1-1/2” 118924 -Flat Washer - .591” ID x .905” OD 122558 - Lock Ring, 3” 118930 - Pin, - 1” x 2-13/16” 122877 - Barrel, 3” x 16” 143500 - Spring, Compression 122881 - Piston, 3” 118441 - Lock Nut, 7/8 UNF Unitorque 122523 - Seal Kit 118930 - Pin, - 1” x 2-13/16” 118924 - Flat Washer - .591” ID x .905” OD 1
Resumen del contenido incluido en la página 15
Cylinders 122836 - Wing Height Control Cylinder (with Rephasing Grooves) - 3-1/4” x 8” x 1-1/4” (1520 Model - Left Wing, 1020 Model - Right Wing) 118796 - Bolt, Shoulder - 1/2” UNC 118924 -Flat Washer - .591” ID x .905” OD 118930 - Pin, - 1” x 2-13/16” 122085 - Rod/Clevis - 1-1/4” x 10” 122840 - Cap, Open - 3-1/4” x 1-1/4” 122842 - Lock Ring, 3-1/4” 122838 - Barrel, 3-1/4” x 8” 122843 - Piston, 3-1/4” 118441 - Lock Nut, 7/8 UNF Unitorque 122849 - Seal Kit 118930 - Pin, - 1” x 2-13/16” 1189
Resumen del contenido incluido en la página 16
Drivelines 160000 - 1000 PTO Driveline - Main Driveline with 80° CV Joint - B&P SFT S6 160078 - Sleeve 160069 - Shield 160073 - Screw (6) Optional 160070 - Ring 160102 - Yoke, S6 -1 3/4 20 spline (c/w Sleeve) 160071 - Shield 160050 - Yoke, S6 -1 3/8 160051 21 spline (c/w Sleeve) Cross Kit 160055 - CV Body, S6 160054 - Yoke, S6 160056 - Tube 160072 - Shield 160053 160073 160064 - Ring Grease Screw Fitting 160065 - Cone/Tube (4) 160073 - Screw (4) 160058 Pin, Roll 160086 -
Resumen del contenido incluido en la página 17
Drivelines 160001 - 540 PTO Driveline - Main Driveline with 80° CV Joint - B&P SFT S8 160108 - Sleeve 160104 - Shield 160073 - Screw (6) 160105 - Ring 160106 - Shield 160087 - Yoke, S8 -1 3/8 160088 6 spline (c/w Sleeve) Cross Kit 160091 - CV Body, S8 160090 - Yoke, S8 160092 - Tube 160107 - Shield 160053 160073 160099 - Ring Grease Screw Fitting 160100 - Cone/Tube (4) 160073 - Screw (4) 160094 Pin, Roll 160116 - Shield Kit 160112 Outer Shaft (c/w Shielding) 160063 Grease 160113
Resumen del contenido incluido en la página 18
Drivelines 160010 - 540/1000 PTO Driveline - Wing Driveline with Torque Limiter - B&P SFT S6 160061 Cross Kit 160151 - Torque Limiter - 950 NM (Detail - pg. 59) 160123 - Yoke, S6 160124 - Tube 160126 - Ring 160169 - Shield 160147 160073 - Screw (3) Outer Shaft 160156 - Cone/Tube (c/w Shielding) (Outer) 160171 - Shield Kit 160095 Pin, Roll 160063 Grease Fitting (2) 160148 Inner Shaft (c/w Shielding) 160157 - Cone/Tube (Inner) 160125 - Tube 160073 - Screw (3) 160059 - Pin, Roll 160169 - Sh
Resumen del contenido incluido en la página 19
160003 - 1000 PTO Driveline - Center Drivelines Driveline with 950 NM Torque Limiter - B&P S5 160005 - 540 PTO Driveline - Center Driveline with 1450 NM Torque Limiter - B&P S5 160151 - Torque Limiter - 950 NM 1000 PTO Driveline (Detail - pg. 59) - OR - 160155 - Torque Limiter - 1450 NM 540 PTO Driveline (Detail - pg. 59) 160061 Cross Kit 160122 - Yoke, S5 160152 - Spline, Male 160153 - Pin, Roll 160122 - Yoke, S5 160154 - Yoke, S5 (c/w Bolt) 160120 - Bolt, Pivot (c/w Tapered Nut)
Resumen del contenido incluido en la página 20
160151 - Torque Limiter 950 NM - Wing 540/1000 PTO Drivelines 950 NM - Center 1000 PTO 160155 - Torque Limiter 1450 NM - Center 540 PTO Note: All parts are common with the exception of the torque limiter spring. (See Below) 160134 - Bolt & Nut (8) 160135 - Plate, Flange Yoke (1) 160136 - Bushing (1) 160132 - Lining, Torque Limiter (1) 160138 - Lining, Plate (1) 160132 - Lining, Torque Limiter (1) 160121 Bolt, Pivot (c/w Nut & Washer) (1) 160141 or Socket Head 160170 - Bolt, Pivot (c/w
