Resumen del contenido incluido en la página 1
Ceramic glass hob
Installation and
Operating instructions
EHS 6651 P
822 924 114-A-100603
GB
Resumen del contenido incluido en la página 2
Dear customer Please read these operating instructions carefully. Pay particular attention to the section „Safety Information” on the first pages. Please retain these operating instructions for later reference. Pass them on to any possible new owners of the appliance. The following symbols are used in the text: Safety information Warning! Information which serves your personal safety. Important! Information on how to avoid damaging the appliance. Information and practical hints Environmental in
Resumen del contenido incluido en la página 3
Contents Operating instructions .................................. 6 Uses, Tables and Tips ................................ 24 Pots and pans .............................................. 24 Safety ............................................................ 6 Tips on saving energy .................................. 25 Electrical safety .............................................. 6 Advice on cooking with and Safety for children .......................................... 6 without automatic w
Resumen del contenido incluido en la página 4
Operating instructions Safety for children Safety When you are cooking or frying, the cooking The safety aspects of this appliance comply with zones get hot. Keep small children away from the accepted technical standards and the the appliance at all times. Keep older children German Appliance Safety Law. However, as the under supervision when they are using the manufacturer we also believe it is our appliance. responsibility to familiarise you with the following safety instructions. This app
Resumen del contenido incluido en la página 5
How to prevent damage to the Disposal appliance Disposing of the packaging Never use the hob as a work surface or for material storage. The frameless edge of the ceramic glass All packing materials used can be recycled. surface is susceptible to knocks. Be careful The plastic materials are identified as follows: when moving pots and pans around. >PE< for polyethylene, e.g. for the outer Do not operate the cooking zones with empty wrapping and the bags inside. pots or pans, or with no p
Resumen del contenido incluido en la página 6
The key features of your appliance Ceramic glass cooking surface: The Timer: With the integrated timer, all zones appliance has a ceramic glass cooking can be switched off automatically. When the surface and 4 rapid response cooking zones. end of the cooking time has been reached, The particularly powerful radiant heater the cooking zone switches off. elements substantially shorten the amount of time taken for the zones to heat up. Sensor fields: Your appliance is operated using Touch-Con
Resumen del contenido incluido en la página 7
Appliance description Control panel 9
Resumen del contenido incluido en la página 8
Digital displays The four display fields allocated to the four cooking zones show: after switching on on selection of the keep warm setting to , depending on the selected heat setting for cooking automatic for residual heat when child safety is switched on upon malfunction /overheating Safety cut-out of the cooking zones If one of the cooking zones is not switched off after a certain time, or if the heat setting is not changed, the corresponding cooking zone switches itself off aut
Resumen del contenido incluido en la página 9
Before using for the first time First cleaning Wipe the ceramic glass surface with a damp cloth. Important! Do not use any caustic or abrasive cleaners! The surface could get damaged as a result. Operating the cooking area Touch Control-Sensor fields In order to operate the Touch Control sensor fields place your finger from above flat onto the required field until the corresponding display lights up or extinguishes, and/or the desired function is carried out. Switching on the appliance To switc
Resumen del contenido incluido en la página 10
Switching off the appliance To switch off the appliance completely, touch the „ON/OFF“ sensor field . ~ 1 sec. Touch the „ON/OFF“ sensor field for approx. one second. The digital displays extinguish. After switching off an individual cooking zone or the entire hob, the existing residual heat is displayed with (as „hot“) in the digital displays of the corresponding cooking zones. Heat setting For setting and adjusting the heat setting ( to ) for the selected cooking zone. With the heat setting
Resumen del contenido incluido en la página 11
Switching the casserole cooking zone on and off Depending on the size of the pot or pan, the “casserole cooking zone“ sensor field can be used to switch between the two sizes of the casserole cooking zone. This can only be activated when a heat setting has already been made for the inner heating ring. 1. Set the desired heat setting. 2. Touch the „casserole cooking zone“ sensor field . The outer heating ring is activated. The control lamp illuminates. 3. In order to switch off the outer heatin
Resumen del contenido incluido en la página 12
Switching the triple ring cooking zone on and off Depending on the size of the pot or pan, the “triple ring cooking zone” sensor field can be used to switch between the three sizes of the zone. This can only be activated when a heat setting has already been made for the inner heating ring. 1. Set the desired heat setting. 2. Touch the sensor field „triple ring zone” sensor field . The middle heating ring is activated. The lower control lamp illuminates. 3. Touch the sensor field „triple ring z
Resumen del contenido incluido en la página 13
4. In order to switch off the outer heating ring, touch the „triple ring zone“ sensor field . The outer and middle heating ring, respectively, is switched off. The relevant control lamp extinguishes. 15
Resumen del contenido incluido en la página 14
Switching off the cooking zone In order to switch off, touch the heat setting selection sensor fields and simultaneously or with sensor field set the heat setting back to zero. Residual heat indicator When an individual cooking zone or the entire cooking area has been switched off, any residual heat is shown with (as „Hot“) in the digital displays of the corresponding cooking zones. Even after the cooking zone has been switched off, the residual heat indicator only goes out when the cooking
Resumen del contenido incluido en la página 15
Cooking with the automatic warm-up function All four cooking zones of the hob can be controlled in nine stages and have an automatic warm-up function: , lowest heat setting , highest heat setting , warm-up function When you select the required heat setting with the heat setting selection sensor field , the cooking zone will work for a specific time on full power and will then switch automatically to the heat setting selected. The duration of the automatic warm-up function depends on the
Resumen del contenido incluido en la página 16
Cooking without the automatic warm-up function If you want to use the cooking zone without the automatic warm-up function, then select the required heat setting with the heat setting selection sensor field . Touch the sensor field heat setting selection in order to set the required heat setting to . With the heat setting selection sensor fields and you can adjust the setting at all times. 18
Resumen del contenido incluido en la página 17
Child safety feature With the child safety feature, the hob can be protected against undesirable use. Switching on the child safety feature The appliance must be switched on in order to switch on the child safety feature. However, no cooking zone must be switched on. 1. Touch the „locking“ sensor field for approx. 3 seconds. As acknowledgement, you hear a signal tone. ~ 3 sec. 2. Touch any of the heat setting selection sensor fields . In the displays, will appear, the child safety feature
Resumen del contenido incluido en la página 18
Switching off the child safety feature 1. Switch on the appliance. If the child safety feature is active, then is indicated. ~ 2 sec. 2. Touch the „locking“ sensor field for approx. 3 seconds. As acknowledgement, you hear a signal tone. ~ 3 sec. 3. Touch any of the heat setting selection sensor fields . The displays turn dark, the child safety feature is switched off. The appliance switches off automatically after a few seconds. 20
Resumen del contenido incluido en la página 19
Timer You can use the timer in two ways: as Switch-off automatic function. You set a slow cooking time for a cooking zone, and the cooking zone switches off automatically when the time expires. This function can be used for several cooking zones at the same time. as a minute minder that does not control the hob („egg timer”), you hear an acoustic signal after the set time expires. The minute minder cannot be used when a cooking zone is switched on. Using the automatic switch-off function The
Resumen del contenido incluido en la página 20
For adjusting the remaining slow cooking time, the required cooking zone must be selected with the Timer sensor field . The relevant control lamp then flashes quicker. The adjustment is made with the Timer setting senor fields or . After expiry of the set slow cooking time, the cooking zone switches off automatically and for two minutes you hear an acoustic signal, the Timer display flashes . 3. Touch the sensor field timer in order to shut off the signal. For a faster adjustment, touch one o
