Manual de instrucciones de Graco 1502 Series

Resumen del contenido incluido en la página 1

PARTS LIST
CHECK that you have all the parts listed
Failure to follow these warnings and the assembly
below BEFORE assembling your swing.
instructions could result in serious injury or death.
Cradle Swing If any parts are missing, call Customer
Service at 1-800-345-4109.
Tools required: Screwdriver and wrench
OWNER’S
(wrench included)
MANUAL
Model No. __________
Serial No. __________
Dear Customer,
Please fill in the
model and serial
numbers above
from the label
Infant carrier Cradle
beneath the

Resumen del contenido incluido en la página 2

PARTS LIST CHECK that you have all the parts listed Failure to follow these warnings and the assembly below BEFORE assembling your swing. instructions could result in serious injury or death. Cradle Swing If any parts are missing, call Customer Service at 1-800-345-4109. Tools required: Screwdriver and wrench OWNER’S (wrench included) MANUAL Model No. __________ Serial No. __________ Dear Customer, Please fill in the model and serial numbers above from the label Infant carrier Cradle beneath the

Resumen del contenido incluido en la página 3

Step 2. Attaching the Legs Attaching the Hanger Adjusting the Handle Push down Lift top frame of cradle, and Hold To bring infant carrier handle on center Step 1. Step 1. tube turn handle so that it lines up of handle from resting position into posi- vertically with the plastic hinges. Push oval end of the upper With crossbar of hanger tion for carrying or swinging, Flattened leg sections firmly onto the toward front of the motor unit, first set the carrier down. side four plastic pegs. Hold tub

Resumen del contenido incluido en la página 4

Step 2. Attaching the Legs Attaching the Hanger Adjusting the Handle Push down Lift top frame of cradle, and Hold To bring infant carrier handle on center Step 1. Step 1. tube turn handle so that it lines up of handle from resting position into posi- vertically with the plastic hinges. Push oval end of the upper With crossbar of hanger tion for carrying or swinging, Flattened leg sections firmly onto the toward front of the motor unit, first set the carrier down. side four plastic pegs. Hold tub

Resumen del contenido incluido en la página 5

Step 6. Replacement Parts Using the Swing FOR SAFE BATTERY USE: Adjust the control switch to Instructions for ordering swing parts: CHECK that all parts are medium setting. Do not remove or insert the batteries with securely fastened together Complete form below. Your swing model number MUST Hanger baby in swing. The batteries could fall on • For a lower speed, push the before using the swing. be included on the form to ensure proper replacement baby if dropped. • control switch toward “low.”

Resumen del contenido incluido en la página 6

Step 6. Replacement Parts Using the Swing FOR SAFE BATTERY USE: Adjust the control switch to Instructions for ordering swing parts: CHECK that all parts are medium setting. Do not remove or insert the batteries with securely fastened together Complete form below. Your swing model number MUST Hanger baby in swing. The batteries could fall on • For a lower speed, push the before using the swing. be included on the form to ensure proper replacement baby if dropped. • control switch toward “low.”