Manual de instrucciones de Grizzly H0758

Resumen del contenido incluido en la página 1

model h0758
3-shelf cart
instructions
t he Model h 0758 is a contemporary looking, low
recommended tools
height cart that has no-slip shelves and a non-
Wrench/socket 12mm ....................................... 1
marring "soft" edge.
Wrench/socket 17mm ........................................ 1
specifications
assembly
Weight .......................................................43 lbs.
l oad Capacity .........................................270 lbs.
1. insert a support rod with a 10mm flat

Resumen del contenido incluido en la página 2

2. r epeat step 1 with the remaining support 4. place the top shelf over the rods and align the rods (see f igure 3), making sure to install the mounting holes. 5 two 20" rods on the front end and the 20 ⁄8" rods on the back end of the shelf. 5. secure the front end of the top shelf with the 20" support rods, then fasten the handle to 5 note: The longer rods will install into the the cart with the 20 ⁄8" support rods (f igure handle later in these instructions. 5). Front of top shelf Fron

Resumen del contenido incluido en la página 3

h 0758 parts breakdown and l ist REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH0758001 HANDLE 8 PH0758008 LOWER SHELF 2 PH0758002 COLUMN 9 PH0758009 HEX BOLT M10-1.5 X 508 3 PH0758003 UPPER SHELF 10 PH0758010 HEX BOLT M10-1.5 X 524 4 PH0758004 FIXED CASTER 11 PW04M FLAT WASHER 10MM 5 PH0758005 SWIVEL CASTER 12 PB06M HEX BOLT M8-1.25 X 12 7 PH0758007 MIDDLE SHELF 13 PW01M FLAT WASHER 8MM -3- h 0758 3-s helf Cart

Resumen del contenido incluido en la página 4