Resumen del contenido incluido en la página 1
4.8 V Cordless
Caulking gun kit
Model 94849
set up and operating instruCtions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by Harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sa Ve tHis M
Resumen del contenido incluido en la página 2
Specifications Cordless rechargeable battery ABS Gun Housing, Steel Tube, Functions Construction powered caulking gun Alloy Steel Pusher Rechargeable 4.8 VDC NiCd Power Supply Charging Unit 120 V~ 7-9 hour Charger Battery Variable Safety Clutch Protects tool from overload 6 speeds Rotary Selector Speed Caulk Type Standard Cartridge up to 10.5 oz. save this Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, p
Resumen del contenido incluido en la página 3
7. use eye and ear protection. Always wear ANSI-approved impact safety goggles and full face shield. Wear an ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. 8. do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. 9. Maintain tools with care. Keep tools maintained and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool
Resumen del contenido incluido en la página 4
using the Battery Charger note: Battery will not reach full charge the first time it is charged. Allow several cycles (operation followed by recharging) before the Battery will become fully charged. note: Performance of the charger may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance. note: During recharging, the Battery will become slightly warm to the touch. This is normal and not a cause for concern. Do not keep the Battery or char
Resumen del contenido incluido en la página 5
unpacking When unpacking, check to make sure that the product is intact and undamaged, and all accessories listed below are included. Cordless Caulk Gun 4.8 VDC Rechargeable Battery Larger Diameter Caulk Tube Recharging Base and Power Supply (4) Caulk Tube Screw Caps If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Figure 1 6-Speed Selector Cordless Caulk Gun 4.8 VDC Rechargeable Battery Locking Button Gate Caul
Resumen del contenido incluido en la página 6
Working with the rechargeable Battery Charging the Battery: 1. Batteries are normally shipped with low or no charge to prevent potential problems during shipment. Before use, you must charge your new Battery. Charge time is ap- proximately 7-9 hours. 2. Plug the battery charger into a 120 VAC, 60 Hz power outlet. 3. Insert the Battery into the charger by aligning the rib on the Battery with the groove in the charger. Press the Battery into place. The Red LED will illuminate indicating that
Resumen del contenido incluido en la página 7
about Caulk, adhesives and Fillers Selecting the right caulk: This tool may be used to apply several different types of material that are packaged in a cartridge. In addition to caulk, this tool may be used to apply various adhesives, fillers and similar materials. No caulk or other material is supplied with this tool. Caulk is a semi-viscous material used to fill holes and gaps in seams of building materials. Some types of caulk are also useful as adhesives. There are three basic types of ca
Resumen del contenido incluido en la página 8
Fillers: Fillers are designed to fill large gaps and provide a flexible and waterproof joint between large surfaces. Typical uses include around chimneys, masonry joints and sections of concrete. Fillers are often sold in larger sized cartridges. To reduce cost, joints are often partially filled with “caulk rod” or sand before being topped with filler. How to apply caulk, adhesive or fillers: 1. Select the proper caulk, adhesive or filler for your application. Have the correct clean up mate
Resumen del contenido incluido en la página 9
Start at one end of the seam, and apply a heavy bead of the filler continuously until you reach the other end. The filler must adhere to both sides of the seam and form a heavy, continuous bead of material. operation Testing your Cordless Caulking Gun note: Follow the procedure below to test the operation of your Caulking Gun before using it for the first time. 1. Install a charged battery as discussed on page 6. 2. Set the 6-speed Selector (11) at position 3, or above, when first running th
Resumen del contenido incluido en la página 10
t roubleshooting Tool will not operate or operates slowly: 1. Battery may need to be charged. Recharge the Battery. 2. Too great a load is being placed on the tool. Try a slower speed on the 6-Speed Selector. The caulk may be dried up in the tube, or the tip may be plugged. Check condition of cartridge and caulk, replace if necessary. Battery loses charge quickly: A new Battery will not hold a charge as long as older ones. Completely deplete and recharge Battery Pack several times to extend i
Resumen del contenido incluido en la página 11
parts list part description QtY. part description QtY. 1 Screw ST 2.9 x 15 4 32 Bronze Axle 1 2 Screw ST 2.9 x 8 1 33 Gear Axle 1 3 Right Housing 1 34 Inner Gear 1 4 Battery Terminal 1 35 Star Gear 6 5 Screw ST 2.9 x 18 4 36 Gear Tray 1 6 Battery 1 37 Bearing 1 7 Locking Button 1 38 Gear 1 8 Screw ST 2.6 x 9.5 5 39 Bronze Bushing 1 9 PCB 1 40 Gear 1 10 Screw ST 2.6 x 9.5 4 41 Wave Washer 1 11 6-Speed Selector 1 42 Washer 2 12 Strap 1 43 Cartridge Holder 2 13 Left Housing 1 44 Clamp 1 14 Spring
Resumen del contenido incluido en la página 12
assembly drawing please read tHe FolloWing CareFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEM
