Manual de instrucciones de Harbor Freight Tools 4832

Resumen del contenido incluido en la página 1

Mini rolling Mill
With 5 rollers
Model 4832
set up And operA ting instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sAVe this MA

Resumen del contenido incluido en la página 2

sAVe this MAnuAl Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. WArning! read all instructions. Failure to follow all instructions listed below may result in serious injury. SAVE THESE

Resumen del contenido incluido en la página 3

the working conditions and the work to be performed. Use of the product for operations different from those intended could result in a hazardous situation. ser Vice 1. Have product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. 2. Maintain labels and nameplates on the product. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Misc

Resumen del contenido incluido en la página 4

speciFicA tions Wire - .031” to .197” Capacity Sheet - 35 Gauge to .079” Gears 3:1 Gear Ratio 2 Smooth Rollers Includes 1 Wire Roller 2 Pattern Rollers unp Acking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. set up instructions read the entire iMport Ant sAFety inForMA tion section at the beginning of this manual including all

Resumen del contenido incluido en la página 5

inserting rollers 1. Remove the uppermost Bolt (11) and Washer (12) from Side Gear (7). 2. Remove Side Gear located below Right Screw Gear (4). See Figure 1. 3. Remove Left Screw Gear (5) and Right Screw Gear (4) from the Mill body by turning counterclockwise. Figure 1 4. Remove all four Bolts (11) from Cover (6) of pull side gear (7) the Mill. Pull Cover up and off. from here 5. With the Cover off, pull Roller and Plates (13) shaft gear (10) up and out of Mill. side gear (7) 6. Choose th

Resumen del contenido incluido en la página 6

2. Turning the Working Handle will raise or lower the top roller, changing the amount of space between the Rollers. This will also determine the depth of indentation that is made by the Roller. 3. Insert the workpiece and turn the Operating Handle to pull it through the Rollers. 4. Clean, then store the product indoors, out of children’s reach. MAintenAnce And ser Vicing damaged products can fail, causing personal injury. do cAution not use a damaged product. if abnormal noise or vibration

Resumen del contenido incluido en la página 7

pArts list & AsseMBly diAgrAM part description Qty part description Qty 1 Operating Handle 1 10 Shaft Gear 1 2 Working Handle 1 11 Bolt 9 3 Handle Gear Screw 1 12 Washer 5 4 Right Screw Gear 1 13 Plates 2 5 Left Screw Gear 1 14 Plate Fitting 1 6 Cover 1 15 Smooth Roller (one shown) 2 7 Side Gear 1 16 Wire Roller 1 8 Side Gear 1 17 Pattern Roller (one shown) 2 9 Main Gear 1 18 Oil Reservoir 1 SKU 4832 For technical questions, please call 1-800-444-3353. Page 7

Resumen del contenido incluido en la página 8

liMited 1 yeAr WArrAnty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase (90 days if used by a professional contractor or if used as rental equipment). This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repair