Resumen del contenido incluido en la página 1
Model Variable speed Cordless Angle Drill
Modèle Perceuse d'angle à batterie
DN 12DY
Modelo Taladro angular a batería
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual s
Resumen del contenido incluido en la página 2
CONTENTS English Page Page IMPORTANT INFORMATION ............................. 3 ASSEMBLY AND OPERATION ............................. 14 MEANINGS OF SIGNAL WORDS ...................... 3 APPLICATIONS ................................................. 14 REMOVAL AND INSTALLATION METHOD SAFETY .................................................................... 4 OF BATTERY .............................................. 14 GENERAL SAFETY RULES – FOR ALL CHARGING METHOD .............................
Resumen del contenido incluido en la página 3
English IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Basic safety
Resumen del contenido incluido en la página 4
English SAFETY GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 1. Work Area (1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. (2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools creat
Resumen del contenido incluido en la página 5
English 4. Tool Use and Care (1) Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. (2) Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. (3) Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must b
Resumen del contenido incluido en la página 6
English SPECIFIC SAFETY RULES AND SYMBOLS 1. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. ALWAYS wear ear plugs when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss. 3. NEVER place hands or other body parts near the drill bit or chuck during operation. Hold the dril
Resumen del contenido incluido en la página 7
English 14. NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center. 15. Carefully handle power tools. Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged. 16. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner be
Resumen del contenido incluido en la página 8
English IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER 1. This manual contains important safety and operating instructions for battery charger Model UC12SD, UC14YF2, UC14YFA and UC24YFA. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. To reduce risk of injury, charge HITACHI rechargeable battery type EB1212S. Other type of batteries may burst causing personal injury an damage.
Resumen del contenido incluido en la página 9
English * If the input rating of a battery charger is given in watts rather than in amperes, the corresponding ampere rating is to be determined by dividing the wattage rating by the voltage rating–for example: 1,250 watts = 10 amperes 125 volts 9. Do not operate battery charger with damaged cord or plug-replace them immediately. 10. Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11. Do not disass
Resumen del contenido incluido en la página 10
English 9. NEVER use a booster transformer when charging. 10. NEVER use an engine generator or DC power to charge. 11. NEVER store the battery or battery charger in places where the temperature may reach or exceed 104°F (40°C). 12. ALWAYS operate charger on standard household electrical power (120 volts). Using the charger on any other voltage may overheat and damage the charger. 13. ALWAYS wait at least 15 minutes between charges to avoid overheating the charger. 14. ALWAYS disconnect the power
Resumen del contenido incluido en la página 11
English FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool MODEL DN12DY: with charger and case NAME OF PARTS 1. Cor
Resumen del contenido incluido en la página 12
English 2. Battery Charger Air vent Battery Battery Installation Hole Installation Pilot Lamp Hole Caution Plate Cord Body Pilot Cord Lamp Name Name Plate Caution Plate Plate Pilot Lamp Battery Installation Hole Caution Plate Nameplate Fig. 2 SPECIFICATIONS 1. Cordless Angle Drill (DN12DY) Motor DC Motor 0 – 800 /min No-load speed Drilling Metal .................................................... 3/8" (10 mm) Capacity Wood ..................................
Resumen del contenido incluido en la página 13
English 2. Battery Charger Model UC12SD UC14YF2 UC14YFA UC24YFA Input power source Single phase: AC120V 60 Hz Charging time EB1212S…Approx. (At a temperature of EB1212S…Approx. 45min. EB1212S…Approx. 30 min. 68°F (20°C)) 60 min. EB1220BL…Approx. EB1220BL…Approx. 50 min. 60min. Charging voltage DC 12V DC 7.2 – 14.4V DC 7.2 – 14.4V DC 7.2 – 24V Charging current DC 1.55A DC 1.9A DC 2.6A DC 2.5A Weight 3.3 lbs (1.5 kg) 2.9 lbs (1.3 kg) 1.3 lbs (0.6 kg) NOTE: The charging time may vary according to t
Resumen del contenido incluido en la página 14
English ASSEMBLY AND OPERATION APPLICATIONS Use as a drill Drilling of soft steel, wood, plastic and aluminum materials. Use as a screwdriver Tightening and loosening of wood screws and tapping screws. REMOVAL AND INSTALLATION METHOD OF BATTERY How to install the battery. Align the battery with the groove in tool handle Handle and slip it into place. Always insert it all the way until it locks in place with a little click, If not, it may accidentally fall Insert out of the tool, causing
Resumen del contenido incluido en la página 15
English 1. Insert the battery into the battery charger. Insert the battery into the battery charger as Battery shown in Fig. 4. Make sure it contacts the bottom of the battery charger. Pilot Lamp 2. Insert the plug of battery charger into the receptacle. WARNING: Do not use the electrical cord if damaged. Have it repaired immediately. Fig. 4 3. Charging When the plug of battery charger has been inserted into the receptacle, charging will commence and the pilot lamp will light on. NOT
Resumen del contenido incluido en la página 16
English Recharge the batteries before they become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter. Avoid recharging at high temperatures. A rechargeable battery will be hot immediately after use. If such a battery is recharged immediately after use, its internal chemical substance will deteri
Resumen del contenido incluido en la página 17
English 3. Charging When the battery is connected to the battery charger, charging will commence and the pilot lamp will light in red. (See Table 2) NOTE: If the pilot lamp flickers in red, pull out the plug from the receptacle and check if the battery is properly mounted. When the battery is fully charged, the pilot lamp will blink in red slowly. (At 1-second intervals) (See Table 2) (1) Pilot lamp indication The indications of the pilot lamp will be as shown in Table 2, according to the condi
Resumen del contenido incluido en la página 18
English 5. Remove the battery from the battery charger. Supporting the battery charger with hand, pull out the battery from the battery charger. CAUTION: When the battery charger has been continuously used, the battery charger will be heated, thus constituting the cause of the failures. Once the charging has been completed, give 15 minutes rest until the next charging. If the battery is recharged when it is warm due to battery use or exposure to sunlight, the pilot lamp may light in green.
Resumen del contenido incluido en la página 19
English NOTE: If the sleeve becomes loose during Tighten operation, tighten it further. The tightening force becomes stronger when the sleeve is tightened. (2) Dismounting the bit. Firmly grasp the ring and loosen the sleeve by Loosen turning it toward the left (in the Ring Sleeve counterclockwise direction as viewed from the front). (See Fig.6) Fig. 6 NOTE: If the sleeve is tightened in a state where the clip of the keyless chuck is opened to a maximum limit, a click noise may occur. This is th
Resumen del contenido incluido en la página 20
English NOTE: A buzzing noise is produced when the motor is about to rotate; this is only a noise, not a machine failure. 5. To use for drilling metal In case you drill metal with an iron-working drill bit, apply in advance a center punch in the drilling position. You can drill metal stably since the point of the drill bit does not slip. If you apply sewing machine oil or soapy water to the drill bit with a brush or an old tooth brush, the drill bit will last long. When drilling a hole, it
