Manual de instrucciones de Emerson RP6251

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- WARNING: TO REDUCE THE The exclamation point within head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten

Resumen del contenido incluido en la página 3

Before We Begin Thank you for purchasing this Emerson audio product. The Emerson brand is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner’ s Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in perf

Resumen del contenido incluido en la página 4

Resumen del contenido incluido en la página 5

PREPARATION FOR USE Unpacking And Set Up • Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers

Resumen del contenido incluido en la página 6

AC Operation The AC power cord is located inside the battery compartment. It is permanently attached to the radio to prevent loss. ” marks on the cover 1.) Open the battery compartment by pressing on the “ and sliding it downward in the direction of the arrows. 2.) Remove the coiled AC cord form the storage compartment and extend it to its full length. 3.) Position the cover over the battery compartment and place the cord into the notch on back cabinet as shown. (Notch on Back Cabinet) 4.) Slide

Resumen del contenido incluido en la página 7

Note: When the AC power cord is connected to the outlet, the power source automatically switches to AC. You may leave batteries inside the unit if desired. There is no battery consumption when the power cord is connected to an AC outlet. Caution This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio uses a polarized AC plug which has on

Resumen del contenido incluido en la página 8

Resumen del contenido incluido en la página 9

Resumen del contenido incluido en la página 10

Resumen del contenido incluido en la página 11

Resumen del contenido incluido en la página 12

button twice. The M O N T H display button again. The D A Y display button again. The H O U R display button again. The M I N U T E S button. The clock blinks and begins to run.

Resumen del contenido incluido en la página 13

Note: This radio includes a special circuit that will keep the clock running for a certain time after the batteries are exhausted, even if the unit is not connected to the AC outlet. However if you do not replace the batteries for a long period of time the clock will stop running and will need to be reset after fresh batteries are installed. Display Light To see the time in low-light conditions, press the LIGHT button. The display lighting will turn on for a few seconds and then shut off automat

Resumen del contenido incluido en la página 14

CARE AND MAINTENANCE There are no user serviceable parts inside this radio. Please refer all service problems to a qualified service facility. Care Of Cabinets If the cabinet becomes dusty, wipe the exterior with a soft dust cloth only. Never use dusting sprays or polishes on the cabinet. If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened with a mild soap and water solution. Always disconnect the AC power cord from the AC o

Resumen del contenido incluido en la página 15

an

Resumen del contenido incluido en la página 16