Manual de instrucciones de Team Products PMD8141

Resumen del contenido incluido en la página 1

TEAM PRODUCTS INTERNATIONAL INC. Limited Warranty
WhAT IS COvERED : Any defect in materials and workmanship.
FOR hOW LONg : 2 years from date of purchase.
WhAT WE WILL DO : If your product is defective and returned within 30 days
after the date it was purchased, we will replace it at no charge to you. If
returned after 30 days but within 2 years of the date of purchase we will
repair it or, at our option, replace it at no charge to you.
If we repair your product, we may use new or recondition

Resumen del contenido incluido en la página 2

Owner’s Manual Model: PMD8141 Welcome 15. Remove adjustment keys and wrenches. Form a habit to make sure that the adjustment keys and wrenches are removed from the tools before This COLEMAN® product has been carefully engineered and manufactured to turning them ON. give you dependable operation. Please read this manual thoroughly before operating your new COLEMAN® product, as it contains the information you 16. Stay alert. To avoid injury pay attention to the work you are doing when need

Resumen del contenido incluido en la página 3

Owner’s Manual Model: PMD8141 Your risk from these types of exposures varies depending on how often you do 10. Unplug the charger from its power source when not in use. this type of work and what type of work you are doing. To reduce your risks, 11. Do not touch the terminals inside the battery charger with any other metal • Work in a well-ventilated area. object such as nails or coins. This can short the charger. • Work with specially designed equipment and masks. 12. Do not store the un

Resumen del contenido incluido en la página 4

Owner’s Manual Model: PMD8141 1) To begin charging, remove the battery pack from the tool by pressing on the Reciprocating Saw: battery release buttons on either side of the battery pack and pulling down. 4. Base (Shoe) 7. Lock-Off Button 2) Plug the battery pack into the battery charger making sure the positive (+) and 5. Saw Blades (2) 8. Comfort Rubber Grip negative (-) poles of the battery match the positive (+) a

Resumen del contenido incluido en la página 5

Owner’s Manual Model: PMD8141 Allen Wrench: (1) Allen Wrench (5mm hex key) is stored in your saw. This is To install the saw blade (Figure 3 &4): needed to insert and/or change your saw blade. 1. FIRST REMOVE battery pack. Lock-Off Button: Your saw is equipped with a “lock off” button to help to eliminate the possibility of accidental starting. The Lock-Off button is located WARNING: Failure to remove battery pack from the saw could result in on the handle above the trigger switch. Y

Resumen del contenido incluido en la página 6

Owner’s Manual Model: PMD8141 PLUNGE CUTTING (Figure 6) TROUBLESHOOTING TIPS: Mark the line of the cut clearly. Choose a SAW DOES NOT WORK? convenient starting point inside the area to be cut • Recharge the battery out and place the tip of the blade over that point. Rest the front edge of the base (shoe) on the CHARGING INDICATOR LED NOT ILLUMINATED DURING work area and hold firmly in position. Depress RECHARGING? the lock-off button, then pull trigger switch to start the cutting ac